Latest smps power plant modular repair Tenders | Government smps power plant modular repair Tenders

CTN :39341700

05 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : upgradation augmentation of shot blasting equipment and shot blasting room including replacement of three motor driven screw lp air compressor for upgradation augmentation of production shop floor (ab and ac bay) at ins eksila - upgradation/ augmentation of shot blasting equipment and shot blasting room including replacement lp air compressor as indicated in part-ii of rfp consists of the following:-, dismantling and degutting of lp air compressors along with all associated equipments and shifting work as specifiied in para 1(1.1)(a) part ii of rfp., lp air compressor, lp air compressor as specifiied in para 3 (3.1) part ii of rfp., dryer unit as specifiied in para 3 (3.1) part ii of rfp., air receiver tank (2000 liters) as specifiied in para 3 (3.1) part ii of rfp., air filter as specifiied in para 3 (3.1) part ii of rfp., acoustic canopy as specifiied in para 4 (4.1)(a) & (b) part ii of rfp., electric power distribution board/ control panel as specifiied in para 4 (4.1)(d) part ii of rfp., dismantling and degutting of shot blasting system along with all associated equipments and shifting work as specifiied in para 1.2 of part ii of rfp., shot blasting system, protection liner & rubber lining as specifiied in para 3(3.2) part ii of rfp., recovery unit as specifiied in para 3(3.2) part ii of rfp., dust collector & exhaust system as specifiied in para 3(3.2) part ii of rfp., shot blasting unit as specifiied in para 3(3.2) part ii of rfp., all other items associated with main eqipment which are mentioned in part ii of rfp [ex para 6(a) & 6(b) etc] part ii of rfp)., civil work for (refers to para 8 of part ii of rfp)., standard accessories (refers to para 9 of part ii of rfp), two years operation & maintenance spares (refers to para 10 of part ii of rfp), special maintenance tools and test equipment (refers to para 11 of part ii of rfp), technical literature / certificates / documentation (refers to para 13 of part ii of rfp), acceptance, testing, trials and commissioning charges (refers to para 14 of part ii of rfp), training (refers to para 16 of part ii of rfp), any other item such as transportation, insurance, freight, packing etc, notes:1. cost of item listed at sl 1 to 12 and 13 (if applicable) are to be quoted in the respective rows of the price bid sheet. 2. bidder not permitted to include cost of items listed at sl 6 to 13 with sl 1 to 5 as lumpsum amount 3. bidder required to mandatorily quote for sl 1 to 5 and 12 failing which bid shall be treated as non bonafide and liable for rejection.4. bidders are mandatorily to quote gst/ taxes as applicable against each serials, falling which bid shall be treated as non bonafide and liable for rejection.

CTN :39849406

28 Mar, 2025 NA

Goa - Goa

Tender For supply, installation, testing, commissioning of ground mounted on grid, 4 mwp solar power plant with the objective of generating and supplying solar energy to thivim tss at 25 kv, single phase, 50hz along with required protection system through public private partnership (ppp) on dbfot (design, build, finance, operate and transfer) basis for 25 years at thivim of konkan railway in the state of goa.

CTN :39811368

09 Apr, 2025 3.51 Lacs

Gwalior - Madhya Pradesh

Tender For providing, supplying of led 70 watt ward samiti 06 (ward 29) file no. 6/25x6/4 - supplying of streetlight with high power led of1to3w each assembled on single mcpcb, system lumens output with effic acy>110lm/w.luminiare having color temp 6500 k& 50000 burning hrs life with minimum @ l 70, the colour rendering index of led light should bemore than70.luminiare comprises of driver, pf0. 95 & surge protection 4kv. housing made of pressure die cast aluminium with heat resistant flat glass/ lens type,ip66 protection. submission lm 80-08 form led source manufacturer & lm 79-08/is16106 from nabl approved lab.manufacturer manadatory testing etc to complete the job.2yrs guarantee certificate from manufacturer. bolt 70w make-as per sor standard list or equivalent, supplying and fixing of 32mm dia.upto 2.00mtr.long g.i. pipe b class bracket for mounting of flourescent street light fitting son poies including bending the pipe to the requireds hapeand wiring with 1.5 sq. mm w.p/pvc wire etc. as reqired. (1 bracket+2 clamp+3 mtr.1.5 sq.mm alluminium wire) as per office sample.

State Government

CTN :39428576

03 Apr, 2025 60.00 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : invitation to bidfor the design, supply, erection, testing and commissioning for retrofitting of existing gt generator & transformers protection system for 351.43 mw ccpp emergency power

CTN :39795347

02 Apr, 2025 49.40 Lacs

Ganganagar - Rajasthan

Tender For providing and fixing electrical material including led lights and wiring in nagar parishad anupgarh area. - electrical work, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .led street light fixture with minimum lumen output 5600 lm, led street light fixture with minimum lumen output 7500 lm, led street light fixture with minimum lumen output 12500 lm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure a attached with this bsr10.0 sq. mm2 core, supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsrdead end clamp with eye hook & pole clamp, providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .40 mm dia., supply and fixing of lt porcelain shackle insulator as per is:1443 1979 and as per discoms standard specifications, suitable for working voltage 1100 volts including all accessories like gi hardware fittings confirming to is:7935/1975 (latest amended) nut, bolt etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr100mm x 110mm, supply & drawing wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr4.0 sq.mm,

CTN :39662261

03 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply and installation of cable transit entry sealing & foolproof protection system with multi-diameter halogen-free epdm modules to prevent rodent entry into ht compartment of switchboard cabinet (sbc) of eog type lhb ac coaches & power cars of gkp & ljn depot.

CTN :39614537

31 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of 16/20 mva, onan/onaf, 33 kv/11kv power transformers with nitrogen injection fire protection system alongwith their accessories and spares

CTN :39263002

31 Mar, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 25mva, onan, 33 kv/6.6kv power transformers with nitrogen injection fire protection system along-with their accessories and spares

Central Government/Public Sector

CTN :39517746

29 Mar, 2025 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : package-a erection, commissioning & trial operation of main circulating cooling water, auxiliary cooling water including application of lining, insulation, supply & painting as and where required including handling of materials at bhel / clients stores / storage yard and transportation to site, and handing over of main circulation cooling water supply and return line from condenser to cooling tower including e&c of bf valve, arvs etc and any other equipment/structure required for the completion of the package, auxiliary cooling water supply line upto a-row of power house along and acw return line branch piping, including supply & installation of items as per boq of 2x800 mw ntpc singrauli stage iii project. package-b erection, commissioning & trial operation of low pressure piping and fire protection system piping including handling at site stores / storage yard, transporting to site, inspection, pre-assembly, erection, alignment, welding, ndt, fixing of hangers & supports, chemical cleaning / pickling, oil flushing, water flushing, hydro testing, surface finish, supply and application of wrapping and coating materials for under ground piping, supply & application of primer & finish paints including labeling & flow direction on the piping & hangers and supports, precommissioning, commissioning, assistance for trial operation of the units & handing over to customer of 2x800 mw ntpc singrauli stage iii project.

Central Government/Public Sector

CTN :39788011

27 Mar, 2025 NA

Bangalore - Karnataka

Tender For supply of led luminaire for flood light with following specifications. 1). waterproof, dustproof and rust proof from environment. 2). rated power : 300 w 3). input operating voltage range and frequency : 140 to 270 volts at 50 hz +/- 2 hz 4). auto cut off below : 120 volt 5). auto cut off above : 300 v 6). rated voltage :230 v,50 hz 7). working life of led: minimum 50000 burning hours 8). operating temperature:-10 degree to +50 degree 9). surge and transient protection:>/=5kv internal and >/= 10 kv external 10). system effi cacy: >/= 100 lm/watt 11). ac power factor at full load : >/= 0.95 12). driver efficiency : >/= 85% 13). be am angle: >/=120 14). warranty: 3 years or more make: aster lite, halonix or any advanced make. note: 1 . portable for hand-carrying: lightweight, ergonomic handle design for easy transport during emergency sit uations. mountable: equipped with a universal mounting mechanism . 2. inspection by tpi. 3.after tpi inspe ction , 01 nos of sample to be sent to consignee for suitability. after approval of suitability only bulk order t o be supplied. otherwise material will be rejected. [ warranty period: 36 months after the date of deliver y ]

Smps Power Plant Modular Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector