Latest softwood pulp Tenders | Government softwood pulp Tenders

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

State Government

CTN :45403999

22 Jun, 2026 NA

Chatarpur - Madhya Pradesh

Tender For building material-doors (wooden membrane door): 1. made of pinewood and finished with wood paint. 2. isi certified. 3. minimum door thickness: 30 mm. doors (wpc – wood plastic composite) solid: 1. made of wpc material. 2. isi certified. 3. door thickness: up to 30 mm. 4. density: 50. wooden door frames – sal wood (sawn timber). aluminum section complete door/window (isi marked): rounded profile, 20-22 gauge, 4 mm thickness. 1. sliding window with aluminum frame and pebbled glass, complete with stainless steel mesh. 2. bearings and locks made of aluminum. 3. frame in silver finish. 4. rubber gasket: 4 mm. iron gate/frame, iron board. insecticide – chlorpyrifos 20% ec. urea fertilizer. nails (3-inch). black japan bitumen paint. g.i. wire. topsoil. growth hormones. copper wire for electrical fittings (2.5 mm). copper wire for electrical fittings (1.5 mm). electrical wiring cables (10 amp, 16 amp, 20 amp, 25 amp, 32 amp); orient ceiling fans; iron grills for windows; painting materials; wall putty; white cement (for whitewashing); paints; emulsion; distemper; laminated flush doors (shutter thickness: 30 mm); ceramic glazed bathroom floor tiles (30x30 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); vitrified floor tiles (60x60 cm, isi-marked, thickness: 9–10 mm, double-charged/layered, with a premium quality certification/label on the packaging); ceramic glazed bathroom wall tiles (30x45 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); granite stone (thickness: 10–15 mm, premium quality); cow dung manure (2 years old, well-decomposed, with a moisture content of less than 15%, and free from pebbles, stones, and plastic); steel railings; kota stone (thickness: 15–20 mm). premium quality submersible pumps (cri) — 1 hp, 2 hp; cement (opc 43 grade, isi marked, weight: 50 kg); bricks (9" x 4" x 3") — fully kiln-fired and compliant with pwd sor standards; river sand — free from impurities such as soil, dust, gravel, or stones; crushed stone aggregate (10 mm, granite/black basalt); crushed stone aggregate (20 mm, granite/black basalt); crushed stone aggregate (40 mm, granite/black basalt); murrum (laterite gravel) & boulders — free from contamination by soil or black cotton soil; steel reinforcement bars (isi marked, thermo-mechanically treated/tmt) — 12 mm; steel reinforcement bars (isi marked, tmt) — 10 mm; steel reinforcement bars (isi marked, tmt) — 8 mm; steel reinforcement bars (isi marked, tmt) — 6 mm; binding wire; iron angles; paver blocks (60 mm) — colored and polished; profile sheets (corrugated/roofing tiles pattern); plastic profile sheets; g.i. (galvanized iron) profile sheets; stone dust.

State Government

CTN :45387022

19 Jun, 2026 NA

Hooghly - West Bengal

Tender For supply of essential items for garage work shop dept of chandernagore municipal corporation - m.s. sheet black 8x4x " (as per sample), m.s. sheet black 8x3x " (as per sample), m.s. sheet black 8x4x1/16" (as per sample), m.s. sheet black 8x3x1/16" (as per sample), m.s. sheet black 4x4x " (as per sample), m.s. sheet black 8x4x " (as per sample), m.s. sheet black 4x4x " (as per sample), m.s. sheet cr 8x4x1/16" (as per sample), g.i. plain sheet 8x4x24 sug (as per sample), g.i. plain sheet 8x3x24 sug (as per sample), g.i. plain sheet 6x3x1/16" sug (as per sample), g.i. corogated sheet 10x3x24sug (as per sample), m.s. angle 2.5x2.5x0.25 (as per sample), m.s. angle 2x2x0.25 (as per sample), m.s. angle 0.5x0.5x0.25 (as per sample), m.s. angle 0.25x0.25x0.25 (as per sample), m.s. angle 1x1x0.25 (as per sample), m.s. angle 1 x1 x " (as per sample), m.s. angle 1x1x " (as per sample), m.s. channel 4x1 x " (as per sample), m.s. channel 4x2x " (as per sample), m.s. channel 3x1 x " (as per sample), m.s. channel 3x1 x " (as per sample), m.s. flat iron 1x3 " (as per sample), m.s. flat iron 3x6 m.m. (as per sample), m.s. flat iron 4x6 m.m. (as per sample), m.s. flat iron 2 x6 m.m. (as per sample), m.s. flat iron 1 x5 m.m. (as per sample), m.s. flat iron 2x6 m.m. (as per sample), m.s. flat iron 1x6 m.m. (as per sample), m.s. flat iron x5 m.m. (as per sample), m.s. flat iron x " m.m. (as per sample), m.s. flat iron 1 x " m.m. (as per sample), m.s. flat iron 1x " m.m. (as per sample), m.s. flat iron x " m.m. (as per sample), m.s. flat iron 1 x " m.m. (as per sample), m.s. flat iron 2x3" m.m. (as per sample), m.s. flat iron 1 x " m.m. (as per sample), m.s. square ber 2" (as per sample), m.s. square ber 1 " (as per sample), m.s. square ber 1" (as per sample), m.s. square ber 1 " (as per sample), m.s. square ber " (as per sample), m.s. square pipe 1" (as per sample), m.s. square pipe 1 " (as per sample), m.s. square rod 1" plain (as per sample), m.s. square rod 1 " plain (as per sample), m.s. square rod " plain (as per sample), m.s. square rod 5/8" plain (as per sample), m.s. square rod " plain (as per sample), m.s. square rod " or 10m.m. plain (as per sample), m.s. bolt nut " x 5" (as per sample), m.s. bolt nut 5"x5/8" (as per sample), m.s. bolt nut 4"x5/8" (as per sample), m.s. bolt nut 3"x5/8" (as per sample), m.s. bolt nut 6"x " (as per sample), m.s. bolt nut 5"x " (as per sample), m.s. bolt nut 4"x " (as per sample), m.s. bolt nut 3"x " (as per sample), m.s. bolt nut 2 "x " (as per sample), m.s. bolt nut 2"x " (as per sample), m.s. bolt nut 1 "x " (as per sample), m.s. bolt nut 1"x " (as per sample), m.s. bolt nut 3"x " (as per sample), m.s. bolt nut 2 "x " (as per sample), m.s. bolt nut 2"x " (as per sample), m.s. bolt nut 1 "x " (as per sample), m.s. bolt nut 1"x " (as per sample), g.i. bolt nut 3"x " (as per sample), g.i. bolt nut 2 "x " (as per sample), g.i. bolt nut 2"x " (as per sample), g.i. bolt nut 1 "x " (as per sample), g.i. bolt nut 1"x " (as per sample), g.i. bolt nut "x " (as per sample), m.s. washer 1" (as per sample), m.s. washer " (as per sample), m.s. washer 5/8" (as per sample), m.s. washer " (as per sample), m.s. washer " (as per sample), m.s. washer " (as per sample), m.s. washer " (as per sample), m.s. washer " (as per sample), m.s. welding rod 2 mm (as per sample), brass rod 3mm (as per sample), sal wood 12x12"x1" (malaysia), steam coal (asian pain), paint blue (asian pain), paint black (asian pain), paint yellow (asian pain), paint red (asian pain), paint bas green (asian pain), paint white (asian pain), muras chasis red (asian pain), red oxide (asian pain), putty, bombay paste, spirit, cotton waste, old cloth (local), kerosine oil (local), tarpin oil (1 ltr bottle), thinner oil (one litter bottle), wire brass 12", hair brass 2" to 3", hair small tuli 2 to 10 no (camel), grease 500gm container, mobile oil (servo), wire nel 4"-3"-2", m.s. raved "x5mm (as per sample), aluminium raved (as per sample) "x5mm, phenyle (5ltr jar)

State Government

CTN :45363624

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of meterial items for implementation of mgnrega scheme under rampurhat2 development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia, chl

State Government

CTN :45364431

18 Jun, 2026 NA

East Nimar - Madhya Pradesh

Tender For supply of building materials, wooden doors and frames - "wooden door frame (including holdfasts) made from teak, sal/saja species woodd1 - 3'-6 x 7'-0""" "wooden door frame (including holdfasts) made from teak, sal/saja species wood" , d2 - 2'-9" x 7'-0" "door frame made of poly pvc, including holdfasts" , d1 - 3'-6" x 7'-0" "door frame made of poly pvc, including holdfasts" , d2 - 2'-9" x 7'-0" "stone door frame" , d1 - 3'-6" x 7'-0" "stone door frame" , d2 - 2'-9" x 7'-0" "wooden doors (door shutters) made from sal/saja species wood" , including handle, l-drop, latch, door stopper, and hinges d1 - 3'-6" x 7'-0" , "wooden doors (door shutters) made from sal/saja species wood" including handle, l-drop, latch, door stopper, and hinges , d2 - 2'-9" x 7'-0" "laminated flush door shutters (isi marked), 30 mm thickness" , d1 - 3'-6" x 7'-0" including handle, l-drop, latch, door stopper, and hinges , "laminated flush door shutters (isi marked), 30 mm thickness" d2 - 2'-9" x 7'-0" , including handle, l-drop, latch, door stopper, and hinges "membrane door shutters (waterproof) (isi marked)" , d1 - 3'-6" x 7'-0" including handle, l-drop, latch, door stopper, and hinges , "membrane door (waterproof shutter) (isi marked)" d2 - 2'-9" x 7'-0" , including handle, l-drop, latch, door stopper, and hinges "chemical door (waterproof shutter) (isi marked)" , d1 - 3'-6" x 7'-0" including handle, l-drop, latch, door stopper, and hinges , "chemical door (waterproof shutter) (isi marked)" d2 - 2'-9" x 7'-0" , including handle, l-drop, latch, door stopper, and hinges "aluminum slider section (2-track) — including materials" , sliding window with aluminum frame and one-way view glass (complete unit) — thickness: 18 gauge "aluminum slider section (3-track) — including materials" , sliding window with aluminum frame, one-way view glass, and steel mosquito mesh (complete unit) — thickness: 18 gauge "aluminum section ventilator (including glass)" , v - 2'-0" x 1'-6"

State Government

CTN :45317723

01 Jun, 2026 11.45 Lacs

Delhi - Delhi

Tender For supply of flood fighting material in the jurisdiction of civil division-xx - supply of wooden ballis of size 12 and thickness 3.5" including transportation, loading and unloading etc. complete at site., providing and fixing bamboo jaffery/ fencing consisting of superior quality 25 mm dia (average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50x25 mm, fixed with nails and g.i wire on existing support complete as per direction of engineer-in-charge., providing & making gabion structure with mechanically woven double twisted hexagonal shaped wire mesh gabion boxes as per is 16014:2012,morth clause 2500, of required size, mesh type 10x12 (d=100 mm with tolerance of 2%) zinc+ pvc coated, mesh wire diameter 2.7/ 3.7mm, mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(id/od), supplied @3% by weight of gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of engineer-in- charge., supply of geo textile bags manufactured using high-quality pet & pp material, ensuring superior strength, durability, and safe bulk handling. designed with a storage capacity of 100 120 kg sand and dimensions of 1.03 m 0.7 m. with a gsm range of 300 400, including transportation, loading and unloading etc. complete at site.as per direction of engineer in charge.(bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of manufacturer, batch number, the gsm and type of polymer encrypted and stitched on top corne .test certificate from approved nabl accredited iso certified laboratory should invariably submitted against each batch of material), providing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc. complete with: sal wood.

CTN :45337720

15 Jun, 2026 NA

Jharsuguda - Odisha

Tender For supply of wooden block of sal wood as per attached annexure-1, sal or similar. [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45275080

04 Jun, 2026 NA

Panaji - Goa

Tender For ghrssidc/e-t/2026-27/731 - dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm., dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead., dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. leada.of area 3 sq.m. and below, clearing debris includes civil/elect items from site and disposing the debris 10km away from the site including loading unloading labour charges and clearing the site good for work etc.complete, providing and fixing of double leaf door with cnc cutting as per design made in -20mm plywood with 3mm thick veneer using ss pvd coated t patties and pu paint and melamine polish using ply of century or equivalent brand including all necessary hettic soft closing fittings etc. complete, providing and fixing of single leaf door made in -12mm plywood with 3mm thick veneer using ss pvd coated t patties and pu paint and melamine polish using ply of century or equivalent brand including all necessary fittings etc. complete, providing and fixing of partition board paneling with aluminium frame work of section size 50mmx25mm vertically and horizontally at 600mm c/c with 12mm thick plywood, top with 3mm thick veneer sheet and using ss pvd coated t patties and pu paint and melamine polish for smooth finish, using century ply or equivalent brand for panelling and fixing with necessary screwing and supports etc.complete, supplying of fire sensor / smoke detector-10nos / existing sprinker replacement / relocation / wiring / hooter panel etc, providing and fixing vitrified double glazed finished of 10mm thick tiles of size 8ft x 4ft in floor, treads or riser of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry filling tile joints with matching pigment and make of of kajariya/ simpolo of any colour as specfied by engineer in charge etc.complete., proving and fixing false ceiling of 1.5mm thick aluminium powder / anodised / painted / coated -profiled panels mounted on ms/ gi frames for support and painted / powder coated chanels / with provision for ac trap, door and light fixing,as per engineer incharge etc.complete, providing and laying in position (1:11/2:3) reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1 coarse sand:3 graded stone agg 20mm nominal size) c. in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level, supplying and fixing of window / roller blind made in100% polyster fabric design plain and colour as per engineer in charge, providing and fixing of 3+2+1+1 seater sofa set made in sal wood frame with high density foam as design as per drawing and engineer in charge, supplying and fixing of designer artifacts showpiece design as per drawing and engineer in charge, supplying and fixing of nylon based carpet 5 mm thickness with backing design as per drawing and engineer in charge, supply and placing in position artificial planters with ceramic pots etc complete as shown in the drawing and as directed engineer incharge., design & supply of signages made from 2mm thick external grade acp sheet of size (wall mounted) with high grade plotter-cut/cnc-cut vinyl & auto-glow vinyl pasted lacquering of letters/pictogram on front side of the plate, of varying colours as per detail drawing and engineer in charge., supplying and fixing of pa - speaker wiring with 6nos ceiling mount speaker to be connected to existing pa system including cabling ,fittings accessceries and necessary supports etc complete., supplying and fixing of light fittings of make -hybac /haffle /phillips / panasonic/ anchor/

CTN :44896344

29 May, 2026 NA

Ajmer - Rajasthan

Tender For corrigendum : tender for supply of packing woods : : -malesian sal wood , packing wood chir fir , jungle wood plank batton beams up to 10 feet , jungle wood planks battons beams 10 to 20 feet , no item

Softwood Pulp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors