Tender For supply of sitc of micro processor based intelligent addressable main fire alarm panel central processing unit , sitc analog addressable photo-thermal detector , sitc of intelligent addressable thermal detector , sitc of addressable manual call point , sitc of addressable fire control module , sitc of addressable horn cum strobe , sitc of fault isolator , sitc of response indicator on surface recessed ms box , sitc of intelligent analog addressable type monitor modules , wiring for fire alarm system , 4 x 1.5 sq.mm , dismantling of the existing fire detectionand alarm system
Tender For invitation of quotation for supply of cat b stores - ac motor 3 phase 415v 1hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 2hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 3hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 5hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 7hp make: hindustan/delta, ac motor 3 phase 415v 7.5hp make: hindustan/delta, ac motor 3 phase 415v 15hp make: hindustan/delta, ac motor 3 phase 415v 30hp make: hindustan/delta, ac motor 3 phase 415v 40hp make: hindustan/delta, ac motor 3 phase 415v 3hp with water pump, ac motor 3 phase 415v 3hp 2800 rmp, tyre inflator-led double display with following specification:- (a) led display to indicate set and measured tyre pressure. vandal proof, ip-65 rated front panel metal buttons. (b) multi unit measurement facility-psi, kpa, bar and kgcm. (c) fail-safe circuitry to prevent air leakage, if sensor fails. (d) electronically adjustable screen brightness. (e) loud buzzer alarm system to alert the user about errors and when inflation is complete. (f) measurement range: 0-150 psi. (g) minimum tire pressure to start inflation: 5 psi. (h) resolution: 1 psi. (j) accuracy: +/-1 psi. (k) operating environment-50 to 65 c. 95% rh. (1) display: 3" x 3" led display. (m) power supply: 220v ac, 60 hz, single phase. (n) dimensions (only functional module) 8" x 8" x 4.5" mm (approx). double acting, reciprocating, high pressure air compressor with following specifications:- (a) max pressure: 175 psi (b) air tank capacity: 300 l (c) fad (cfm): 28.00 (d) electric motor & fittings -10 hp, 3 phase. high pressure car washer-3hp, 1ph. minimum technical specification:-
Tender For supply and commissioning of active passive material for the networking of new academic block for chemistry department - products, distribution switches 24 x 1/10/25g sfp28 interfaces with redundant power supply and have an 40g uplink port, access switch l2 24x 10g multigigabit (10g/5g/2.5g/1g/100m) ports, poe and additional option for modular ul ports supports 10g or 25g, access switch 48 nos. 10/100/1000 base-t poe ports and additional 4 nos. of 10g with stack cable and stack module, indoor wireless access point 4x4 mimo on both radio interfaces and mu-mimo technology, fibre module, 10 g sm (lc), fibre module, 40 g sm (lc), cat-6a cable s/ftp (305/500 meters box), cat-6a i/o (1 x rj45), for face plate, faceplate with gang box, cat-6a patch cord, s/ftp, 2 meter, cat-6a patch cord, s/ftp, 1 meter, cat6a 24-port patch panel (loaded), fibre cable, os2 9/ 125 sm,12-core, armoured, fibre cable, os2 9/125 sm, 6-core, armoured, fibre llu, 24-fibre with splice tray, rack mount fully loaded, fibre llu, 12-fibre with splice tray, rack mount fully loaded, fibre patch cord, lc-lc sm, duplex 3 meter, fibre patch cord, sc apc - sc apc sm, simplex 2 meter, fibre pigtail, sc apc single mode, fibre patch cord, lc apc - lc upc sm, duplex 3 meter, outside plant dome fiber optic splice enclosure ip 68 rating, rack, 15u, minimum 600mm depth, wall mount with accessories, sitc of 60 kva online ups with 30 min backup, supply of 32 mm pvc conduit with accessories (lsi marked), supply of 40 mm hdpe pipe, services, laying of utp cable in raceway/conduit/casing/hdpe, installation & termination of i/o user side (including i/o punching, labelling and testing), installation of jack panel (including i/o punching, labelling and testing), installation of face plate and gang box (including i/o punching, labelling and testing), laying of fibre cable in hdpe pipes as per laying instructions (including hdr drilling, hdpe pipe, fibre pulling, route markers, pits etc.), installation of rack, installation of llu (including splicing), integration, testing & documentation
Tender For corrigendum : supply of spares for co2 based generator fire protection system at power house of omkareshwar power station - lcd display fmz5000 320x240, fmz 5000 conventional detector module, fmz 5000 8 relay module, monitoring high pressure system loss (light barrier), zonal card (front panel fmz5000) bbf, co2 cylinder valve k-85-20, release device,e 24v-dc, note: 1) transit insurance shall be in the scope of the supplier.2) bidder should quote unit basic rate inclusive of packing, forwarding, handling and freight charges for f.o.r. omkareshwar power station in column no.5. 3) bidder shall quote unit cgst, sgst amount in column no. 6 &7 respectively for intra-state supply or shall quote igst amount in column no. 8 for inter-state supply. 4) bidders are requested to verify carefully the amount entered by them in respective column and the amount generated automatically through formulae before uploading it to the portal
Tender For supply, installation, testing and commissioning with oem certification of modular power sup ply arrangement for vdu (42"-85") and embedded pc with input and output redundancy arrangement and hot pluggable modules having voltage & load current digital display on each module. each set consisting of :- 1. isolated inverters (master/slave with auto changeover)-2 nos. input 110v dc, output 110vac, 500va ( as per rdso tan no-sts/e/tan/3012 version 3.0 dated-03.11.2022) 2. isolated dc-dc converters-02 nos. connected in parallel with built in o-ring diode, active current sharing as rdso/spn/165/2023 version 4.0 o r latest (input:110vdc ,output:24vdc/10a) 3.input (redundancy) o-ring diode module with two input sourc es and one output supply along with potential free contacts, alarm and acknowledgment switch. 4. 3u stain less steel rack with back panel, mother board and front panel power connectors, power cord for vdu panel. make-gallant or similar. specification details attached. [ warranty period: 30 months after the date of del ivery ]
Tender For corrigendum : supply of solarstreetlight - solar based led dc bulbs 9 watt for household load , solar based ac output 50 watt for household load , solar based mobile charging usb port for household load , solar based spv module 165watt poly crystalline for home light system , solar based charge controller 20a 12 watt for home light system , solar based battery 60ah 12 watt for home light system , solar based 12 watt led streetlight , solar based battery 42ah with battery box for streetlight , solar based pv panel 75 watt for streetlight , pole height 5mtr for solarstreetlight , mounting structure and wiring accessories for solarstreetlight , laboure charges for installation of solarstreetlights
Tender For corrigendum : supply of cnc systen - 6fc52030af000aa3 sinumerik operator panel front op 010 , 6fc52030af010aa1 sinumerik operator panel front with , 6es71346gf000aa1 simatic et 200sp analog input module , 6es71356hd000ba1 simatic et 200sp analog output module , 6es75131al020ab0 simatic s7-1500 cpu 1513-1 pn , 6es71556aa010bn0 simatic et 200sp profinet bundle im , 6es79548lc030aa0 simatic s7 memory card for s7 , 6es71316bh010ba0 simatic et 200sp digital input module , 6es71326bh010ba0 simatic et 200sp digital output module , siemens et 200l module di16 do16
Tender For a) design, manufacture & supply of one no. common auto / manual synchronising panel comprising of auto synchronising module,relays, contactors ,digital frequency meters, digital voltmeters, analog meters,auto/manual selector switches, unit-1 to 8 selector switch, terminal blocks, mcb, auxiliary relays, wiring materials etc and required critical spares as mentioned in section-iv of bid document shall be provided b)supply of cables,cabling accessories such as lugs,glands etc c)dismantling of existing manual synchronising panel along with check synchronising relay, voltmeter, frequency meter, auxiliary pt etc and its terminations from the existing panel d)installation of new auto/manual synchronising panel, cabling/wiring from generator pt, bus pt, governor feedback, feedback from avr etc from each unit to the new auto sequencer panel. e)laying and termination of control cable from each unit (8 units) to synchronising panel in control room f)testing & commissioning of auto/manual synchronising panel.
Tender For corrigendum : custom bid for services - repair and maintenance of ac modules dc modules and various pcbs of all departmental drilling rigs of ongc tripura asset-work includes but not limited to supply of men, materials, testing equipment / tools etc for fault finding (trouble shooting), repairing, calibration and functional testing of ac modules, dc modules and various pcbs in e1400 series drilling rigs of tripura asset. broad details of the activities to be carried out are as below: a. following jobs are to be carried out in pcbs i. physical checking of healthiness of components & cleaning of the pcbs. ii. checking of voltages at different points in the pcbs after powered up through simulator. iii. replacement of faulty components, limited to 50% cost of the pcb, to make it operational. iv. calibration of pcbs v. on load testing of 12 hrs. continuous loading for satisfactory operational vi. fixing of pcbs in the respective panels b. following jobs are to be carried out in ac module i. visual inspection of module for any loose hardware & cleaning of the module. ii. checking of circuit by using simulator. iii. checking of over frequency tripping. iv. checking of under frequency level. v. under frequency voltage cut back test vi. idle-run ramp and idle trip test vii. throttle regulation check viii. master slave and command circuits check ix. current demodulator check x. automatic voltage regulator check xi. meter circuit check xii. over voltage trip check xiii. reverse power trip check xiv. frequency demodulator check xv. module panel meter check xvi. replacement of faulty components, limited to 50% cost of the ac module, to make it operational. xvii. on load testing of 12 hrs. continuous loading for satisfactory operational xviii. fixing of ac modules in the generator panel c. following jobs are to be carried out in dc-module i. visual inspection of module for any loose hardware & cleaning of the module. ii. dead band and current limit calibrations iii. zero throttle interlock circuit test iv. firing circuit test v. speed feedback circuit test vi. power limit circuit test vii. slave circuit test viii. manual voltage circuit test ix. over current trip calibration test x. meter circuit check xi. replacement of faulty components, limited to 50% cost of the dc module, to make it operational. xii. on load testing of 12 hrs. continuous loading for satisfactory operational xiii. fixing of dc modules in the dcpcr panel d. following jobs are to be carried out in battery charger i. visual inspection and cleaning of components such as transformer, voltmeter, ammeter, pcbs, rectifier, indication lamps and tightening of loose hardware, if any. ii. checking of tripping logics, dc under voltage, dc over voltage, reverse polarity, ac mains fail, over current, over temperature etc. iii. replacement of faulty components, limited to 50% cost of the battery charger, to make it operational.-msme exemption - no | startup exemption - no