Latest solvents Tenders | Government solvents Tenders

Central Government/Public Sector

CTN :39846483

21 Apr, 2025 19.00 Lacs

Chennai - Tamil Nadu

Tender For providing of custom bid for services - supply of chemicals glasswares solvents markers and other research related materials on atc

Central Government/Public Sector

CTN :39849173

04 Apr, 2025 NA

Bhusawal - Maharashtra

Tender For supply of brushes paints and varnishes flat size 12 mm of rubber set, conforming to is:384[part-1] : 2012 (six revision) . and bristles to is 1844/1993. . note:-this item is reserved for nsic registered firms only.

Central Government/Public Sector

CTN :39818085

17 Apr, 2025 NA

Jodhpur - Rajasthan

Tender For supply of pu painting kit for apricoat yellow and blood red pu paints consists of 07 item 1:-epoxy zink phosphate primer ( two pack ) to chapter ii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty . per kit 52 ltrs. 2:- unsaturated polyester based knifing putty colour white ( two pack ) chapter iii of r dso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 40 kgs. 3:- pu surface white ( two pack ) ch apter iv of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 34 ltrs. 4:- pu paint beige finis h ( two pack ) colour shade ral 0708040 to chapter v of rdso spec. no. m&c/pcn/100/2018 amndt. 1 b. qty. per kit 44 ltrs. 5:-pu paint maroon finish ( two pack ) colour shade ral 0303045 to chapter v o f rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 05 ltrs. 6:-thinner compatible with pu pa int. qty. per kit 50 ltrs. 7:-thinner for epoxy paint compatible with epoxy primer & putty. qty. per kit 2 0 ltrs. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

CTN :39824300

10 Apr, 2025 10.00 Lacs

Chhatarpur - Madhya Pradesh

Tender For invitation for item rate contract: supply of civil construction materials, machinery, and accessories as per bill of quantities (boq) sheet for year 2025-26 (item rates should be quoted without gst and all other charges, taxes, and transportation costs, which shall be borne by the supplier up to the site.) - aggregate (20mm), aggregate (40mm), stone dust crust, sand, aggregate (6mm), muram, aggregate (10mm), crusher run mekadam (crm), farsi, bricks (soil), bricks (flyash), cement (50kg), paver block 60 mm m30, paver block 80 mm m30, paver block 100 mm m30, paver block 60mm m30 reflactive rubber, r.c.c. hume pipe 200 mm dia n.p.3, r.c.c. hume pipe 300 mm dia n.p.3, r.c.c. hume pipe 450 mm dia n.p.3, r.c.c. hume pipe 600 mm dia n.p.3, r.c.c. hume pipe 1000 mm dia n.p.2, reinforcement 8mm, reinforcement 10mm, reinforcement 12mm, reinforcement 16mm, barbed wire steel 9.38 kg per 100 r.m., layout lime powder, distemper asian interior isi, emulson asian company interior isi, oil paints asian all color, tractor rent with diesel (35 hp 3 siender), tractor rent with trolly and diesel (35 hp 3 siendr), concreet mixture machine with diesel, providing jcb on rent with driver and deasal, brush 3", brush 6", roller brush 8", roller brush 10", roller brush 12", welded angle and channel structures as per requirements, birla white cement, distemper tractor all colour, mood primer, metel primer, kali chuna, fevicol, steel centring shutering with fitting and carting, wood centring/shutring with fitting & carting, tiles all size isi mark, vertified tiles isi mark 60 x 60 cm 10 mm thik, glesed tiles isi mark 300 x 300 mm 10 mm thik, water base all color, turpentine oil

CTN :39572653

27 Mar, 2025 NA

Sonipat - Haryana

Tender For corrigendum : supply of benchtop spectrophotometer - nuclear magnetic resonance better spectrophotometer tabletop , nmr tubes of 5mm standard high quality with stand and washing brushes , software with spectra for post- data analysis , mestre nova software for nmr data processing perpetual license with 2 user licenses , deduterated any different solvents

CTN :39757716

26 Mar, 2025 3.50 Lacs

Bikaner - Rajasthan

Tender For open gym material with installation-, supply & fixing equipment for open gym as per following details. item should be fix properly including e/w & c.c. in m-20 as per requirement., , sit up & pull board double: product dimensions: 1760mm (length) x 1140mm (width) x 660mm (height)., , safe workout area: -2500mm (length) x 1600mm (width)., , the sit up board double made from "c" class gl pipe. center column made from 100mm nb "c" class g.i. pipe., , the main frame is of 25mm nb made from "c" class gl pipe. frp sheet of 3mm thickness is molded on main frame., , the remaining frame of the sit up board is of 32mm nb made from "c" class gi pipe., , the powder coating is done with pure polyester powder paints with 60 to 70 micron thickness., , the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb "c"class welded with m.s. round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness., , supply & fixing equiopment for open gym as per following details. item should be fix properly including e/w & cc. in m-20 as per requirement., , *legg press dimensions:-1840mm (length) x 360mm (width) x 1560mm. (height)., , *safe area-2.8 x 1.4mtr., , *leg press equipment made from "c" class g.l. pipe of different nb. nb stands for norminal bore sizes le., , *internal diameter of pipe in millimeters, , *the center pipe is of 100mm nb made from "c" class g1. pipe., , *the sleeve frame is of 100 dd and of m.s. seamless pipe with thickness 5mm. this sleeve can be disassembled from main frame., , *the bottom support of m.s. round plate of 250 mm & 10mm thick., , the remaining outer frame is of 32nb made from "c" class g.1. pipe., , 2, , the foundation used for fixing is structure and made from center pipe of g.i. of 80mm. nb "c" class welded with m.s., , round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.5. angle of 3 mm thickness and 20mm x 40mm crc. square pipe of 3mm thickness., , *seat & back rest provided are made up of ms deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm., , *the footrests are made from casted aluminum material, having sizes 130mm x 310mm x 5mm thick. with the support, , of 310mm x 130mm x 3mm thick ms plate., , the frame of footrests made up of 25 nb "c" class g.i. pipe. *, , closing caps are made up of high quality fiber reinforced plastic material. *, , *to build structure bushes are used which are made from m.s. seamless pipe of 50mm c.d. and 5mm thickness., , *the pins used are made up of 25 mm sae 8620 bright material., , *the bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand., , *high tensile steel with galvanized nut bolts are used for assembly., , *the cerclips used for assembly are of a24 mm, , 3, , providing and fixing of cross trainer of size not less than 1320mm (length) x 600mm (width) 1750mm (height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. the main structure frame shall be made from g.l. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 250 mm & 10mm thick. the handle frame shall be made up of atleast 25nb "c" class g.i. pipe. the footrests shall be made from aluminum casting material of size not less than 130mm x 310mm x 5mm thickness and mounted on ms. plate of size 130mm x310rnm x 3mm thick. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders paints with 60 to70 micron thickness, complete in all respect includig fixing the m. s holdfast in cement concrete to hold the whole structure., , 1, , 4, , providing and fixing of chest press of size not less than 2000mm (length) 710mm (width) x 2200mm. (height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pul

CTN :39724420

11 Apr, 2025 70.00 Lacs

Puducherry - Tamil Nadu

Tender For supply of consumables/non-consumables for the department of pharmacology. - chemicals, acetylcholine chloride (ar grade), ammonia (ar grade), ammonium acetate (lc-ms grade) sigma, ammonium thiocyanate acs grade, ammonium thiocyanate ar grade, ascomycin (reference standard powder) sigma, atropine sulphate (ar grade), benzoic acid sigma acs reagent, >99.5% (sigma), bismuth sub nitrate (ar grade), bratton marshall reagent (ar grade), calcium chloride (ar grade) powder, carbamazepine (analytical standard) sigma, chloroform hplc (ar grade), cobalt nitrate (ar grade), concentrated hydrochloric acid (ar grade), concentrated nitric acid (ar grade), cyclosporine a (analytical standard) sigma, dextrose (ar grade) powder, diazepam (analytical standard) (sigma), diclofenac (ar grade), edta (ar grade), ethanol absolute, ferric chloride (ar grade), ferric nitrate (ar grade), formic acid lc/ms grade (98- 100%), glacial acetic acid (hplc grade), isopropyl alcohol (hplc grade), magnesium chloride (ar grade) powder, mercurric chloride (lr grade), morphine sulphate (pure powder), ninhydrin (ar grade), orthophosphoric acid (ar grade), papaverine pure powder (ar grade), phenobarbitone (phenobarbital) (reference standard powder) sigma, phenytoin (reference standard powder) (sigma), potassium chloride (ar grade), potassium dihydrogen orthophosphate (ar grade), potassium hydrogen phosphate (ar grade), potassium hydroxide (ar grade), potassium iodide (ar grade), potassium permanganate (ar grade), pottassium dihydrogen phosphate (ar grade), quality controls for estimating carbamazepine in human serum using uplc, quality controls for estimating cyclosporine in human whole blood using lc-ms, quality controls for estimating phenobarbitone in human serum using uplc, quality controls for estimating phenytoin in human serum using uplc, quality controls for estimating tacrolimus in human whole blood using lc-ms, quality controls for estimating valproic acid in human serum using lc-ms, sodium bicarbonate (ar grade), sodium chloride (ar grade), sodium hydroxide pellets (ar grade), sodium nitrite (ar grade), sodium salicylate powder (ar grade), sodium valproate/valproic acid sodium (reference standard powder) (sigma), strychnine pure powder (ar grade), sulfamic acid (ar grade), sulphuric acid (ar grade), tacrolimus (reference standard powder) (sigma), trichloro acetic acid (ar grade), valproic acid- d6 solution (sigma), zinc sulphate sigma, solvents, acetonitrile hplc grade, acetonitrile lcms grade, ethyl acetate (ar grade), glycerine (ar grade), methanol (ar grade), methanol (hplc grade), methanol (lcms grade), plastic wares, 15ml pp conical bottom tube (tarson) (pack of 20), 50ml pp conical bottom tube (tarson) (pack of 10), centrifuge tube rack (polypropylene) - 15ml capacity (min. 30 places), centrifuge tube rack (polypropylene) - 50ml capacity (min. 10 places), centrifuge tube stand (15 ml capacity) (12x3 holes, aluminium), cuvetes (plastics) 2ml, membrane filter, nylon 0.45 , 47mm (pack of 100), micro tips (200-1000 l) (white) (pack of 1000), microcentrifuge tube (1.5 ml) with flip cap, sterile, pp (pack of 500) (preferred make; abdos/tarson), microcentrifuge tube (2 ml) with flip cap, sterile, pp (pack of 500) (preferred make; abdos/tarson), microtips (0.2 - 10 ul) (white). (pack of 1000) (preferred make; abdos/tarson), microtips (2 - 200 l) (white). (pack of 1000) (preferred make; abdos/tarson), nitrile gloves (purple, size-large) (pack of 100), nitrile gloves (purple, size-medium) (pack of 100), pasteur pipette - plastic, 3ml sterile (pack of 100), screw capped polypropylene 2 ml storage vials (pack of 100), stir bar, magnetic teflon coated, reusable (8 x 30mm), storage bottles, graduated, clear with pp screw cap and pp pouring ring (blue), autoclavable upto 140 c, size: 1000ml (borosilicate glass), storage bottles, graduated, clear with pp screw cap and pp pouring ring (blue), autoclavable upto 140 c, size: 100ml (borosilicate glass), storage bottles,

Central Government / Public Sector

CTN :39702561

31 Mar, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of skin friendly cleaning gel in 250 gms. pack specification: 1. the product should be in a gel f orm and it should be to be applied easily over surface of skin. 2.the product should be able to remove stu bborn grease,carbon blacks,lubricating burnt oils including burnt lubricating/mobile oils,diesel, kerosene et c.from skin without drying or cracking. 3. diesel,kerosene,solvents or soaps must be removed from washi ng stained hand after using the industrial hand cleaning gel. 4. the product should be disperisible in water 5. the product should give smoothing effect to the hand after washing 6. the product should be stable and non %u2013toxic 7. the product should be non %u2013 flammable and environment friendly. 8. ph value should between 9 %u2013 10.5 9. specific gravity 0.9968 + 10% 10.density %u2013 0.993g/ml + 10% 11 . boiling point %u2013 100%b0 c ]

Central Government/Public Sector

CTN :39662635

25 Mar, 2025 NA

Multi City - Multi State

Tender For special universal absorbent mat roll having following features:- 1) eight layers of 100% polypropylen e thermally bounded. 2) exclusive dimple pattern spread wicking of liquid throughout mat for faster, easier cleanup . 3) absorbs most common industrial liquids oils, water, solvents, coolants and more. 4) colour grey, dimension 76c m w x 45m l. 5) 25% recycled contents minimum. 6) absorbency up to 188 litres per bag. 7) weight 16.8 kgs appr ox. 8) composition - 100% polypropylene. suitable samples to be provided to consignee for approval before effecti ng bulk supply. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39664198

01 Apr, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of skin protective barrier cream, brand - kerodex-71 a) protective barrier cream should for m a silicon oxide or zinc oxide protective layer with application prior to work. (b) the barrier should pr otect against acids, alkalis, resins, paints, varnishes, hydro carbon solvents, diesel grease chromates, lubricating oils & phenolic compounds. (c) it should be water repellant & non greasy. (d) it should be h ypoallergenic & allows skin to breathe. (e) it should be antibacterial & non-toxic. (f) it should be manu factured under a drug license by competent food & drug authority of the govt. (g) should give minimu m protection for four hours. [ warranty period: 30 months after the date of delivery ]

Solvents Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector