Latest spring leaves Tenders | Government spring leaves Tenders

State Government

CTN :39576953

26 Mar, 2025 NA

Muzaffarpur - Bihar

Tender For supply, installation, testing and commissioning of fixed furniture for main hospital building of hbch rc muzaffarpur bihar 842004 - over head cabinetsover head storage - size : 450mm(d) & 600mm (h)/site requirement(h) storage cabinet: providing and fixing overhead storage cabinet formed of 18 mm marine plywood of approved make finished with 1.5 mm laminates of approved shed and pattern with adjustable shelves of 18mm thick marine plywood as per drawings. shutters:shutter of overhead cabinet to be formed of 18mm ply finished with 1.5 mm laminate of approved colour and pattern, with auto closing spring loaded hinges (hydraulic type) and aluminium profile handles all complete . all external exposed edges to be finished with 2mm thick pvc edge band of approved shade.(front area to be measured) note-rate shall be inclusive of all necessary approved fittings like auto closing spring loaded hinges, locks, aluminium profile handles,tower bolts, and all necessary hardware items. (front area to be measured), full height storage unitproviding and fixing storage units of full/ low height as per drawing. they shall consist of 18mm thk. marine ply top, sides, bottom, shelves and shutters & 8mm thk marine ply for back. the bottom of the storages shall be at 75mm from ffl. the shutter with box type higes of approved make & teak lipping finished with melamine and with approved laminate on all the shutter edges.division of the shutters shall be made equally according to the length of the storages ( as approved by engineer in-charge/ architect). all the external surfaces including back shall be finished with 1.0mm thk. laminate of approved make. 18mm thk. marine ply shelves at 16 interval (approximately / divided equally) or as specified in drawing shall be provided. all inner surfaces shall be finished with laminate including the shutters. the cabinet has group locks, hinges,stopper, and magnate, handles of approved make & quality and provided s.s. satin finished handle of approved shape,size & make all complete. note- rate shall be inclusive of all necessary approved fittings like hinges,magnets, locks, 150mm long ss satin finish handles, and any necessary hardware items. (front area to be measured), double skin partition providing and fixing full height double skin type partition main frame: -aluminium sections of 16 gauge of size 50x50 mm aluminium section verticals at minimum 600mm centre to centre spacing and 50 x 25 mm size aluminium sections horizontal at 600mm centre-centre spacing. extra frame below slab soffit for conduit to run above.(make - jindal, indal, hindalco) skin: 12mm thk marine ply backing on both side screwed with frame as per the drawing. finish: finished with 2mm thick laminate of approved make. laminate shall be fixed on plywood skins with glue having grooves as shown in the drawing or as directed by engineer in charge *the rate shall be also inclusive of pattas & bands, grooves at any level, any design in veneer, textures etc including the necessary framing/ openings for electrical, telephone & ac outlets. front area to me measured & opening for the door should be deducted for payment. ** note -rate for high partition to include the cost of framework above false ceiling as required to fix the same to the ceiling slab for which no extra payment shall be made and the rate quoted shall be inclusive of the same., 12mm thick toughened glass fixed partitions with filming:providing and fixing in position 12mm clear float toughened glass partition with patch fittings for the full height glass partitions as per the direction of the engineer-in-charge. the work to include making necessary template for all the glasses and then cutting the clear float glass to correct size, making all the necessary holes, cuts etc., then toughen the same.the cost to include all hardware (patch fittings etc) required of hettich/haffele/dorma or approved equivalent make viz., single corner patch, top and bottom corner

CTN :39320117

08 Mar, 2025 NA

Bangalore - Karnataka

Tender For bid to ras repair of mt vehicals - front brake shoe liner lh and rh , liner rivit , door mechanism rh , door handel , door lock rh , hub oil seal , hub lock washer , brake shoe bolt , returning spring , mechanical labour charges for the removal of old items and fitment with new spares parts , wiper blade , reverse gear switch , checking of eniter loom, finding out the electrical fault, repair of broken electrical wires, replacment of cables with labour charges , self starter overhauling by rewinding the armature assy, field coil repair and repalcement of carbon brushes , alternator overhaul , startingb relay 24v , startingb relay 12v , ignition switch , fuses 10 amp, 15 amp, 25 amp and clips , insulation tape , electrical labour charges for repairing all broken electrical wires, replacement of fuses , clutch plate and pressure plate , release bearing , flywheel bearing , flywheel bolt , flywheel facing , lock washer , door catch , door lock , fan belt , side mirror , headlight bulb assy , headlight holder , headlight relay , brake light bulb and indicator bulb assy , wiper arm , brake booster front overhauling , brake bosster rear overhauling , clutch master cylinder , clutch master cylinder yoke pin , clutch booster , gearbox top lathe work , steering gear box assy , engine mounting pad , brake pad front , cylinder head gasket , tappet cover gasket , ananond , knuckle kit , knuckle bearing , shim , front wheel bearing , wheel alignment , brake shoe , meter worm , cable kit , lock set , wiring kit , carbureator seal kit , cda unit , spark plug , oil filter , singer arm axle , singer arm brush , chai sprocket , sprocket rubber , wheel bearing , yoke set , manifold rubber , packing , air filter , oil seal kit , indicator flasher , ampere meter , center stand , center stand pin , mirror , clutch plate, stell plate, clutch hub and clutch centre , clutch lathe work , timing chain kit , cylinder head valve , valve oil seal , cylinder head lathe work , piston kit , packing kit , o ring kit , enigine bearing , connection rod , camshaft , rocker , chain sprocket , tool box , side shield , shield lock , foot rest , sprocket bearing , centre stand , welding , carbureator seal kit , singer arm bush , centre stand pin , front fork , fuel tank cap , computerised sensor scanning , flywheel sensor

CTN :39595187

26 Mar, 2025 NA

Gurdaspur - Punjab

Tender For supply of frt brake shoe,rear brake shoe re,kick return spring re,clutch cable re,acc cable re,ht oil re,front wheel brg re,rear wheel brg re,sprocket brg re,speedometer box re,chain sprocket re,spark plug re,carburator distance re,cyl head gasket re,cyl lower gasket re,fuel filter element scorpio,oil filter element scorpio,front caliper pad scorpio,rear brake shoe scorpio,wheel cyl assy scorpio,air filter element scorpio,gear lever lit tata,cyl head gasket als,cyl head gasket tata,piston ring t 815,siren 24y,wiper blade swift,waste leage petrol cont,ram assy milading,slip cable assy,self starter bush tatra,bender drive assy tatra,whel cyl assy als,plastic pipe

CTN :39573832

26 Mar, 2025 NA

Dehradune - Uttarakhand

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , gum spirit of turpentine oil as per is 533 (q3) , tyre nylon grip 28 x 1 and half inch , tube 28 x 1 and half inch , tyre nylon grip 26 x 1 and half inch , tube 26 x 1 and half inch , chain cover , screw mud guard long 1 inch , carrier clamp , chain bicycle , brake shoe complete , m g stay clip , chain wheel , seat clip , break u bolt , seat nut with bolt , stand spring , cotter pin , valve tube , ball 5 by 32 , ball 1 by 4 , pedal lh , pedal rh , spokes with nipple , crank plain , ball head race set of three , free wheel , reflector , cover saddle pvc , bb spindle with cup , chain adjuster , chain stay bolt , spindle hub rear , spindle hub front , hub cone , brake clip l and r , hub cup , handle grip , brake u rear , brake u front , solution tube , cutting plier , screw driver long 300 mm double side , open spanner 8x9 inch , open spanner 10x11 inch , ring spanner 12x13 inch , ring spanner 14x15 inch , pipe wrench 450mm , pedal spanner , parrot plier , free wheel die , hammer 300 gm , nipple key , scissor brass handle 300mm , rime bend wrench , tasla steel , compressor nozel , compressor pipe , paint brush 2 inch bid number/ & ( * ) : gem/2025/b/5964713 dated/ + : 05-03-2025 bid document/ 2 2 1 / 48

CTN :39542078

24 Mar, 2025 NA

Leh - Jammu And Kashmir

Tender For tender for supply of job order for 11c 091313w bolerow - unsv clutch plate pressure plate by unscrewing nuts and bolt m and l for repair to clutch assembly by dismantling carefully , clutch paddle rubber pad , for clutch plate , pressure plate , release bearing clutch , fuel filter assy air filter assy oil filter fuel tank drain out oil sump cleaning m and l for dismantling carefully , oil filter , air filter , fuel filter , engine oil , to more to dcs material and l d and d blower , replacement of seat cover of velvet cloth with high density foam complete m and l , m and l for dismantling and taking down all the wheels 11c 091312y bolero camper , wheel service kit front wheel , for wheel service kit rear , kin pin shims , for kin pin bush , lock pins , crown pinion oil seal , chuck nut , centre bearing , wheel cylinder bushes , gasket fr and rear hub , bearing grease , for m and l for repair to steering box assembly by disconnecting steering box assy , m and l for replacement of steering rod with bushes complete , taking down carefully road spring assembly front and rear by unsrewing nut and bolt cleaning servicing , main strip rear side , for main strip front side , ii rubber bush , strip no 2 and 4 , nut and bolt leaving with nuts , repair of self statrer 12 volts dc dismantling carefully cleaning servicing m and l , bendix pinion , sole noid switch 12 volt dc , bearing as per requirement , body bracing bolt , vehicle more see to dcs d and d unsv main propeller from , m and l for dismantling and taking down unserviceable turbo charger assy from the veh

CTN :39542079

24 Mar, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of job order for 11c 091312y bolero - 11c 091312y bolero camper m and l for dismantling and taking down all the wheels , i wheel service kit front wheel , ii wheel service kit rear , iii kin pin shims , iv kin pin bush , v lock pins , vi crown pinion oil seal , vii chuck nut , viii centre bearing , ix wheel cylinder bushes , x gasket fr and rear hub , xi bearing grease , m and l for repair to steering box assembly by disconnecting steering box assy from more see to dcs , i m and l for replacement of steering rod with bushes complete , i taking down carefully road spring assembly front and rear by unsrewing nut and bolt cleaning servicing , i main strip rear side , ii main strip front side , ii rubber bush , iii strip no 2 and 4 , v nut and bolt leaving with nuts , i m and l for repair of self statrer 12 volts dc dismantling carefully cleaning servicing more see to dcs , i bendix pinion , ii sole noid switch 12 volt dc , iii bearing as per requirement , iv body bracing bolt , d and d unsv main propeller from vehicle more see to dcs , i m and l for dismantling and taking down unserviceable turbo charger assy from the veh , m and l for dismantling carefully fuel filter assy air filter assy oil filter fuel tank drain out oil sump cleaning , i oil filter , ii air filter , iii fuel filter , iv engine oil , material and l d and d blower to more to dcs , m and l for repair to clutch assembly by dismantling carefully unsv clutch plate pressure plate by unscrewing nuts and bolt , i clutch paddle rubber pad , ii clutch plate , iii pressure plate , iv clutch release bearing , m and l of replacement of seat cover of velvet cloth with high density foam complete

CTN :39577585

17 Mar, 2025 5.00 Lacs

Chittorgarh - Rajasthan

Tender For tata, leyland, mahindra (reboring engine work, pump nozzle work, spring work, opening and fitting of key pin/crown pin/turbo, length related work in front, exle and trailer labour) releated work.

CTN :39571928

19 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of - o ring servomotor bhel,pn ts02-0830 00 , 20.30.10.058.5 - bush bhel pn hy4306010002nc , 20.30.10.065.5 - roller motor bhel , 20.30.10.084.5 - o ring bhel pn hy315660112 , 20.30.10.086.5 - o ring bhel pn 82 , 20.30.10.090.5 - o ring bhel pn 84 , 20.30.10.108.5 - bearing thrust bhel pn hy30212170002 , 20.30.10.306.5 - bush balancing bhel,pn 11001 , 20.30.10.320.5 - pilot piston bhel pn 13003 , 20.30.10.326.5 - spring auxiliary bhel pn 13006 , 20.35.10.070.5 - o ring bhel pn 56 , 20.45.10.004.5 - foil guiding bhel dwts 03 0900-00 3 , 20.50.12.018.5 - ring oil scrapper bhel pn 16166576 , 20.50.12.210.5 - pad thrust brg bhel pn hy7220161697 , 20.50.12.502.5 - fltr air prim fmi dw fmi bpcl 12609 b , 20.50.12.504.5 - fltr air sec fmi dw fmi bpcl 12609 b rev , 20.60.10.104.5 - seals shaft bhel pn itca17297105 , 20.60.10.221.5 - strainer steam bhel pn hy305090002 , 20.60.10.234.5 - spare thrust pads bhel hy 315170002 , 20.60.10.235.5 - assy front oil gland bhel hy302320002xxx , 20.60.10.237.5 - assy front labyrinth gland bhel , 20.60.10.241.5 - assy rear labyrinth gland , 20.60.10.242.5 - assy rear oil labyrinth gland , 20.60.10.291.5 - o ring for servo motor hy 315570012 , 20.60.10.292.5 - valve pilot for servometer , 20.60.10.293.5 - ring retaining bhel pn hy 315570022 , 20.60.10.294.5 - o ring bhel pn hy 315570032 , 20.60.10.245.5 - bush connecting parts lp guide balde , 20.60.10.251.5 - bush connecting parts hp guide blade , 20.60.10.256.5 - cup connecting parts hp blade carrier , 20.60.10.257.5 - cup connecting parts hp blade carrier , 20.60.10.258.5 - guide eccentric connecting parts , 20.60.10.259.5 - cup connecting parts rear brg hsg , 20.60.10.260.5 - washer spherical connecting parts , 20.60.10.261.5 - bolt threaded connecting parts rear brg , 20.60.10.262.5 - washer lock connecting parts rear brg , 20.60.10.263.5 - washer spherical connecting parts , 20.60.10.264.5 - cup connecting parts rear brg hsg , 20.60.10.265.5 - disc connecting parts rear brg hsg , 20.60.10.271.5 - nut hexagon for cval hy 315530122 , 20.60.10.275.5 - head spindle for control valve bhel , 20.60.10.277.5 - du bush for cvalve hy 315530242 , 20.60.10.279.5 - sleeve adapter for cv hy 315530272 , 20.60.10.284.5 - screw grub pilot vlv hy 315550032 , 20.60.10.290.5 - piece connectingfor servo motor bhel

CTN :39562349

25 Mar, 2025 NA

Alwar - Rajasthan

Tender For tender for supply of repair to tata xenon - mechanical , water servicing and electrical labour charges , oil filter make mico , engine oil make servo , diesel filter make mico , fog lamps assy , centre track rod assy , tie rod arm lh and rh , gear shifter kit complete.tata , front brake pad set. , assy rear spring parabolic. make tata , exhaust manifold tata , clutch plate set make luk , rear brake shoe set make driveline , head lamp set make mico , engine control unit make tata , overhauling of self starter , armature rewinding , replacement of carbon brush , , wheel alignment and wheel balancing , minor denting and painting complete.

Central Government/Public Sector

CTN :39565526

17 Mar, 2025 1.49 Lacs

Shaktinagar - Karnataka

Tender For changing of assy. ball joint, front spring bracket, spring brk, clutch cover, fly wheel etc. and other repairing work of truck no. up64d 5568 running in dragline section of khadia project.

Spring Leaves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector