Latest spring plate scrap Tenders | Government spring plate scrap Tenders

CTN :43054630

15 Dec, 2025 NA

Solan - Himachal Pradesh

Tender For supply of xlpe cables for working voltages from 3. 3 kv up to and including 33 kv as per is 7098 (part 2) (q3) , cable termination kit (v2) (q3) , excavation in trenches not exceeding 1 point 5 meter wide and not exceeding 1 point 5 meter in deep getting out in hard dense soil for stay assembly erection of poles complete , returning filling in including spreading levelling watering and well ramming in layers n exc 25cm thick , removing of excavated material n exc 50m and depositing where directed at a level n exc 1 point 5m above the starting point , supply install testing and commissioning of ht 11 kv 3 phase 50 cycles outdoor type totally enclosed metal clad switchgear complete with vcb having rupturing capacity upto 350 mva , supply and fix cable jointing kit for 11 kv straight through cold shrink 3 core x 120 sqmm complete , material and labour for reinforced concrete pipes 150mm dia class np2 laid and jointed complete with collars for cable protection , supply and install synthetic rubber insulated mats 2 pint 5 mm thick for voltage upto 11kv for electrical purpose suitable for electrical shock and safety of sizes 2m x 1m complete , m and l for pcc 1 column 4 column 8 type d2 using 40mm graded stone aggregate in foundation and mass concrete , m and l for pcc 1column 2 column 4 type b1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded angles , material and labour for chain link ms galvanisd fencing including line wires any mesh size and type to any type of standards rails straining bolts , m and l cutting the existing bituminous road concrete surface 150 mm thick to the required width and depth for laying of cable protection pipe , m and l for replacement of unserviceable double walled corrugated hdpe duct pipe of 110mm outer dia , m and l for providing cable route markers cast iron round shaped disc of 150mm dia 3mm thick embossed with marking ht cable mounted on angle iron , m and l for earthing with galvanised steel earth electrode plate of size 600x600x6mm thick ) /bid number: gem/2025/b/6881369 * /dated: 04-12-2025 & & / bid document1 / 20

Central Government/Public Sector

CTN :43031232

24 Dec, 2025 NA

Khorda - Odisha

Tender For supply of submersible pump set with solar panel : :-- submersiable pump with controller , solar plate , hdpe pipe , submersible cable , pvc touchen , gi structure for installation , water tank , material and civil work with material rcc for foundation , material transportation

CTN :43036406

18 Dec, 2025 10.00 Lacs

Ganganagar - Rajasthan

Tender For work of providing and fixing open gyms in various parks in the municipal council area (mla lad) - surfing boardproviding and fixing of surfing board of size not less than 1000mm (length) x 600mm (width) x 1400mm (height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. the main structure frame shall be made from g.1. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 0250 mm & 10mm thick. the footrests shall be made from high quality fiber reinforced plastic material. high tensile steel with galvanized nut bolts shall be used for assembly. the powder coating shall be done with pure polyester powder of ackzonoble berger/ nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including.), thai-chi spinner (2 wheel)providing and fixing of thi-chi spinner (2 wheel) of size not less thal 700mm (length) x 1000mm (width) x 1280mm (hight), to increase mobiltiy of shoulder elbow and hip-knee. the main structure frame shall be made from g.i pipe minimum of 80 bn "c" class welded with m.s. round base plate atleast 250mm & 10 mm thick. high tensile s.s. nut bolts shall be used for assembly. the powder casting shall be done with pure plyester powders from ackzonoble/berger/nerolac paint. with 60 to 70 micron thickness, complete in all respect including fixing the m.s. hodfast in cement concrete to hold the whole structure, under the direction of engineer-in-charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including), leg pressproviding and fixing of leg press of size not less than 1840mm (length) x 360mm (width) x 1560mm. (height) to build up the muscles of thigh and enhence the strength of waist. the mian structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the sleeve frame minimum of 100 od and m.s. seamless pipe with thickness 5mm. this sleeve should be disassembled from main frame. the footrests shall be made from casted aluminum material, having sizes minimum of 130mm x 310mm x 5mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), double standing twisterproviding and fixing of double twister standing of size not less than 1500mm (length) x 600mm (width) x 1300mm. (height) to enhence flexibility of waist. the main structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the handle frame is minimum of 25nb shall be made from "c" class g.i. pipe. the twister plate to be fitted on the bottom frame shall be made up of m.s. roaund plate of minimum size 300mm and 10mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac paint with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), construction of foundation/inaugration pedst

CTN :43040773

06 Jan, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of lock retraction pin and chain and foundation plate .

CTN :42286646

04 Dec, 2025 NA

Hyderabad - Telangana

Tender For bid to ras bid to ras bid to ras supply of octagonal pole 10 mtr , round arm bracket , m20 x 900 j bold , base plate , 10 x 4c al ar cable , 16a mcb , installation of poles with crane , digging pits , foundation , cable laying , led light 200 watt , 2 core copper wire

CTN :42971289

08 Dec, 2025 9.00 Lacs

Rawatsar - Rajasthan

Tender For atal gyan kender pallu-- a a 1.5 a a a a a ₹ 50 a 40. (quantity itwamd) ₹ a 1 ₹ 5 ₹ 10 a a ₹ 1 ₹ 6 a foundation and plinth first class brick masonry in cement gravel 1:6 mortar including closing of side cracks and leveling. additional amount masonry work in superstructure up to a height of 4.5 m from plinth level., - 1:6 , , 1.2 , ( ) . . . , , , 4.5 , 1:1.5:3 , , , , , 1:3 , 1:6 - 14 12 , . . . , , ( ) 40x40x3 22 . . 2 25x25x3 ( ) , . . 1x2 , ( ) 40x40x3 22 . . 2 25x25x3 ( ) , . . 1x2 , 14 ,24 20 x 3 (beading) 1.2 x 0.60 0.72 , p/f steel girls / guide bars for window & ventilators., 20 1:4 , ( 3 ) 901 2300 , iv~v bzvksa dk qkz lhesav elkyk 1-4 esa 12 ,e ,e eksvkbz esa vk/kkj rs;kj djds, painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. including scaffolding and safety provision pwd bsr item no.12.45, enamel painting on ms surface more than two coat as per item no. ( 13a+13b) x2.25, lhesav dk hav uhao esa 40 fe-eh- ukeh; eki dh bzav dh fx h lhesav jsr elkyk 1lhesav % 6 jsr % 12fx h vuqikr es feykdj] mkyuk rfkk dqvkbz djuk] rjkbz lesra, e/w in filing ordary sandy soil with compaction curing & leveling in plinth area.lead up to 2km, rain water pipe 75mm thick ( p.v.c. ), add. name plate & photograph., add electric fiting

CTN :42903953

08 Dec, 2025 NA

Dewas - Madhya Pradesh

Tender For providing and fixing gym item in balaji nagar at ward 42 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4inch b class gi pipe;prime stand

State Government

CTN :42443426

04 Dec, 2025 2.06 Lacs

Multi City - Chhattisgarh

Tender For corrigendum : tender for installation of 02 no. new bhel-make, 6.6kv, 1300kw, id fan motor (with base plate) by replacement of old existing id fan motor (with base plate) on the exiting foundation at ph-i, htps, kwb

Central Government/Public Sector

CTN :42011365

23 Dec, 2025 NA

Jodhpur - Rajasthan

Tender For corrigendum : supply of lock retraction pin & chain and foundation plate for c.b.c transition coupling drg. no. sk-62724 (alt-28) item no.15 & 14.

Spring Plate Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector