Latest spring plate scrap Tenders | Government spring plate scrap Tenders

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

CTN :45011317

07 May, 2026 NA

Dehradun - Uttarakhand

Tender For supply of ms shuttering plate 01 mtr x 01 mtr , ms pipe 06 mtr long 40 mm dia , ms adjustable jack , ms base plate , swivel coupler , mason trawel 150 mm , traffic cone , sintex 500 ltrs , shovel , pick axes , pan motor , spade , crowbar , electric steel cutting machine , steel cutter machine blade

CTN :44687111

30 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold and ambuja and ultratech and acc and jk and dalmia under job no 2376 list att , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make tata and sail and jsw , water proofing compund conforming to is 2645 2003 make pidilite and dr fixit and fevicol , quick setting compound make pidiite and quick fix and fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , gi binding wire tata and sail and jsw , cement based paint snowcem make berger and asian and nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags camouglage colour of size 30 inch x 15 inch inside laminated interlocking stiched weight of the each bag should not be less then 42 to 45 gms per bag , anti corrosive red oxide zinc chromate primer conforming to is 5 2004 make asian and berger and neroloc , synthetic paint enamelled og conforming to is 5 2004 make asian and berger and nerolac , thinner make nerolac and berger and asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , ismb hot rolled 200x100mm and 4 mtr long make tata and sail and jsw , prefeb mild steel door of size 750x 1800mm double shutter , loop holes 780 x 300 mm make tata and sail and jsw , loop holes 1000 x 300 mm make tata and sail and jsw , loop holes 1250 x 300 mm make tata and sail and jsw , ventilator steel 600x450 mm will be fabricated , wooden planks for shuttering iind class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , galvanised iron strip 32x6mm , funnel fitted with 20mm dia gi pipe 1 point 5m long make jindal and tata and kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make presto and polycab and finolex , charcoal , salt //bid details 2 / 32

CTN :44687082

27 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold and ambuja and ultratech and acc and jk and dalmia under job no 2390 , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make tata and sail and jsw , water proofing compund conforming to is 2645 2003 make pidilite and dr fixit and fevicol , quick setting compound make pidiite and quick fix and fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , gi binding wire tata and sail and jsw , cement based paint snowcem make berger and asian and nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags camouglage colour of size 30 inch x 15 inch inside laminated interlocking stiched weight of the each bag should not be less then 42 to 45 gms per bag , anti corrosive red oxide zinc chromate primer conforming to is 5 2004 make asian and berger and neroloc , synthetic paint enamelled og conforming to is 5 2004 make asian and berger and nerolac , thinner make nerolac and berger and asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , ismb hot rolled 200x100mm and 4 mtr long make tata and sail and jsw , prefeb mild steel door of size 750x 1800mm double shutter , loop holes 780 x 300 mm make tata and sail and jsw , loop holes 1000 x 300 mm make tata and sail and jsw , loop holes 1250 x 300 mm make tata and sail and jsw , ventilator steel 600x450 mm will be fabricated , wooden planks for shuttering iind class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , galvanised iron strip 32x6mm , funnel fitted with 20mm dia gi pipe 1 point 5m long make jindal and tata and kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make presto and polycab and finolex , charcoal , salt //bid details 2 / 31

CTN :44687084

27 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold and ambuja and ultratech and acc and jk and dalmia under job no 2376 list att job no 2390 , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make tata and sail and jsw , water proofing compund conforming to is 2645 2003 make pidilite and dr fixit and fevicol , quick setting compound make pidiite and quick fix and fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , gi binding wire tata and sail and jsw , cement based paint snowcem make berger and asian and nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags camouglage colour of size 30 inch x 15 inch inside laminated interlocking stiched weight of the each bag should not be less then 42 to 45 gms per bag , anti corrosive red oxide zinc chromate primer conforming to is 5 2004 make asian and berger and neroloc , synthetic paint enamelled og conforming to is 5 2004 make asian and berger and nerolac , thinner make nerolac and berger and asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , ismb hot rolled 200x100mm and 4 mtr long make tata and sail and jsw , prefeb mild steel door of size 750x 1800mm double shutter , loop holes 780 x 300 mm make tata and sail and jsw , loop holes 1000 x 300 mm make tata and sail and jsw , loop holes 1250 x 300 mm make tata and sail and jsw , ventilator steel 600x450 mm will be fabricated , wooden planks for shuttering iind class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , galvanised iron strip 32x6mm , funnel fitted with 20mm dia gi pipe 1 point 5m long make jindal and tata and kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make presto and polycab and finolex , charcoal , salt //bid details 2 / 31

CTN :44610291

27 Apr, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of shuttering plate size 1 point 00 x 1 point 50 mtr , shuttering plate size 1 point 00 x 1 point 00 mtr , shuttering plate size 1 point 00 x 1 point 20 mtr , shuttering plate size 1 point 00 x 0 point 60 mtr , swivel coupler 40 nb , ms pipe 40 nb 6 mtr

State Government

CTN :44990757

04 May, 2026 50.00 Lacs

Ganganagar - Rajasthan

Tender For cement bag ppc (50 kg) , sand/gravel , , 40mm grit stone (crushed) (cut voids 1/11) , , 20mm grit stone (crushed) , , gravel (wides cut 1/6) , , concrete material (cut wides to 1/6) , , first class (22.5x11x7.5) , , brick ii category (22.5x11x7.5) , , cement interlocking block m-30 grade 60 mm thik (i and damru type) , , cement interlocking block m-30 grade 80 mm thik (i and damru type) , , precast tiles/blocks glazed size 30x45 cm , , mosaic size-40 mm thick , , precast tiles/blocks vitrified size 60x60 cm , , kota stone (one side) up to 900 sqm polish kota stone , , kota stone (one side) up to 901 to 2300 sqm polish kota stone , , kota stone (one side) above 2300 sqm ploish kota stone , , kota stone (one side) up to 900 sqm bina polish kota stone , , kota stone (one side) up to 901 to 2300 sqm bina polish kota , , stone , , kota stone (one side) above 2300 sqm bina ploish kota stone , , white cement , , factory made doors (30mm thick, solid core single flap) , , iron (tor steel fe 415/500 for reinforcement) , , winding wire 18 gauge , , iron guard , , conical iron / square bar / patti / angle iron , , iron mesh , , inamil paint , , distemper (water bound) , , for lime plastering , , primer (for iron/wood) , , gi sheet 22 gauge , , asbestos cement sheet 22 gauge (0.80 mm) , , indian w.c , , orrisa w.c. , , european w.c , , foot rest , , porcelain lipped urinal 430*350*300 mm with cupronickel, backing and pvc waste pipe , , wash basin 450*300mm with cupel, bracket and pvc waste pipe , , rcc np 3 hume pipe with collar 600 mm diameter , , rcc np 3 hume pipe with collar 450 mm diameter , , rcc np 3 hume pipe with collar 300 mm diameter , , sp 15/16 ampere , , sp 5/6 ampere , , modular socket outlet, isi marked , , 3 pin 5/6 ampere , , 6 pin 15/16 ampere , , mcb db , , 2+2 way, spn, single door , , 2+4 way, spn, single door , , 2+6 way, spn, single door , , tractor trolley , , tractor water tanker capacity 4000 liters , , cement crunkrite mixer 5-7 feet, vibrator , , niddle/plate vibrator with operator , , grinding machine with operator, large (motor driven) , , compersor , , hydrolic excavater/jcb , , shuttering iron plate along with poles and other material to be installed at tp site and removed after the stipulated period. , , water and pumping charges (filling)

CTN :44959346

02 May, 2026 NA

Bijapur - Karnataka

Tender For supply of shuttering and other items d d - shuttering plate size 1 into 1 mtr , shuttering plate size 1 into 0 point 50 mtr , ms pipe 06 mtr long , swivel coupler , right angle coupler , nut and bolt centring shuttering , binding wire

CTN :44896258

25 Apr, 2026 NA

Champawat - Uttarakhand

Tender For supply of shuttering and staging items e e - shuttering plate 1 mtr , shuttering plate 1 pt 2 mtr , shuttering plate 0 pt 6 mtr , ms shuttering pipe 6 mtr , ms shuttering pipe 2 pt 5 mtr , nut and bolt , right angle coupling , swivel coupler , base plate , strip jack

CTN :44687038

15 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : supply of construction material and b and r items cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 under job no 2392 , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63 90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 make tata sail jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make tata sail jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make tata sail jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make tata sail jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses purlin rafter and ms plate etc all as directed ms rhs of size 80x40x3.2 , ms rhs of size 50x25x2.9 , ms rhs of size 96x48x3.2 , ms plate of size 8mm thick , ms plate of size 10mm thick , ms plate of size 12mm thick , ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete , ms flat iron 40x5mm thick for wind , iron welding rod confirming to is 814 to 2002 , water proofing compoundconfirming to is 2645 to 2003 make pidilite dr fixit fevicol , quick setting compound make pidilite fevicol quick fix , cement based paint snowcem make berger asian nerolac , oil bound distemper washable quality of ) /bid number : gem/2026/b/7401084 * /dated: 29-03-2026 & & / bid document 1 / 37 & & ' ' /item category proprietary brand of make nerolac berger asian , birla white wall care putty water resistant white cement make nerolac berger asian , ppgi roofing sheet 10 ft x 3 ft long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4 to 5 micron epoxy primer , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa , synthetic paint enamelled og colour confirming to is 5 to 2004 , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium window triple track with frame of size 1000mm x 1000mm including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , ms anchor bolt suitable for rcc work 12mm dia 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm complete all as directed , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick 1st quality confroming to is 156 to 2006 , white cement confirming to is 8042 oblique 1989 , curtain arrangement drapery and rod made of 25 mm dia , retaining wall height 8 mtr x 3 mtr 5 nos 40 mtr cement opc 43 grade packed in hdpe bag each 50 kg wt confirming to is 8112 to 2013 , coarse sand free from vegetation confirming to is 650 to 1991 reaffirmed 2008 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch confirming to is 1597 part i 1992 reaffirmed 2002 , pvc pipe 75mm dia 3 mtr long confirming to is 4985 to 2000 reaffirmed 2006 //bid details 2 / 37

Spring Plate Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government