Latest ss bolt Tenders | Government ss bolt Tenders

State Government

CTN :39124779

07 Feb, 2025 12.00 Lacs

Dholpur - Rajasthan

Tender For supply and installation of jungle gym items in luv kush vatika sarmathura - parallel bar/push and dip station: - size 1700 mm x 600 mm x 1200 mm. providing and fixing of parallel bar/push and dip station made from b class gi pipe of 2.5 mm wall thickness. material pre galvanized mild steel, material thickness: 3mm. the equipment is fixed on ground with cement concrete and j shaped welded bolts of 18 mm thickness. the gym equipment shall be finished smooth with a primer coating of at least 60 to 70 micron thickness using exonoble/berger make paints or its equivalent paints. m.s. plate of 280 mm x 130 mm x 5 mm thickness is used. the holding down/fixing of gym equipments shall be embedded in cement concrete in the ratio of 1:2:4 (1cement:2 coarsesand: 4 stone agg. 20mm nominal size).equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires, multi horizontal bar - size: 1450mm length x 900mm width x 2360mm height two way system for multiple use with growing children. the newly designed equipment with modification with old single bar at middle for becoming multiple activities instrument in building upper body muscles especially that of the back and shoulder. wide and narrow grips provide for various permutations of popular exercise soft handgrips for dipping using your own body weight. a very strong and robust exercise for triceps, shoulders and back muscles. push ups: appropriately heighted rolled bars that relieve unnecessary stress from wrist and forearms. allows user to dip lower for a more complete arm, chest, shoulder and back workout. equipment made to meet en 16630 specification - european standard for permanently installed outdoor fitness equipment. epoxy coating of paint to prevent any damage from extreme weather condition. vertical pipe 80mm nb gi b class pipe and chinning bar of 32mm nb c class gi pipe of 3.5mm wall thickness j hooks system used for grouting for higher stability and ease of installation. fix with concrete slab. non fading virgin lldpe makes all plastic components sun face resistant.equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires, double horizontal bar: - size 1200 mm x 1100 mm x 1800 mm. providing and fixing double horizontal bar instrumental in building upper body muscles especially that of the back and shoulder made of b class gi pipe of 2.5 mm wall thickness. wide and narrow grips provide for various permutations of popular exercise. dips: soft handgrips for dipping using your own body weight. a very strong and robust exercise for triceps, shoulders and back muscles. push ups: appropriately heighted rolled bars that relieve unnecessary stress from wrist and forearms. allows user to dip lower for a more complete arm, chest, shoulder and back workout. equipment made to meet en 16630 specification - european standard for permanently installed outdoor fitness equipment. epoxy coating of paint to prevent any damage from extreme weather condition. thick galvanized main post of 114 mm diameter. all pipes are of 2.5 mm thickness. self lubricating bearing for maintenance free usage. nylon foot pedals for extended life. j hooks system used for grouting for higher stability and ease of installation. fix with concrete slab. non fading virgin lldpe makes all plastic components sun face resistant.equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires, triple twister: -size :- l 1700 mm x b 1300 mm x h 1300 mm. providing triple twister equipment made from b class gi pipe of 2.5 mm wall thickness of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimetres. the center pipe is of 100 mm nb made from b class gi pipe of 2.5 mm wall thickness. the m.s. round plate of 250 mm & 10 mm thickness is welded at bottom. the standing frame of the triple twister is of 32 nb made from b class gi pipe of 2

State Government

CTN :39123285

07 Feb, 2025 NA

Hazaribag - Jharkhand

Tender For supply of trw materials under trw (o&m) head budget fy- 2024-25 - ht brass studs 1/2" (is 3347), lt brass studs 1/2" (is 3347), lt brass studs 3/4" (is 3347), ht bushing (is-3347) 250 amp., lt bushing (is 3347) 250 amp., lt bushing (is 3347) 630 amp., ht bushing clamp 4 hole, kraft paper 2.5 mile, kraft paper 4 mile, crape paper, press phan paper 10 mil, press phan paper 14 mil, press board 1mm, press board 2mm, press board 3mm, bakelite tube 3/8x1/2", bakelite tube 5/8x3/4", cotton tape 1", weaving cotton tape 1 1/4", empire sleeving size 2mm, empire sleeving size 3mm, empire sleeving size 4mm, empire sleeving size 6mm, rubberised cork strip 50x5mm, rubberised cork strip 40x5mm, rubberised cork washer size 107x70x5mm, rubberised cork washer size 89x45x5mm, rubberised cork washer size 70x45x5mm, rubberised cork washer size 70x45x2mm, rubberised cork washer size 63x35x5mm, rubberised cork washer size 45x28x5mm, rubberised cork washer size 50x28x2mm, rubberised cork washer size 45x25x5mm, rubberised cork washer size 32x14x5mm, ms nuts & bolts size 1 1/2x3/8", ms nuts & bolts size 2 1/2x5/8", ms nuts & bolts (different size), ms washer size 1/2", ms washer size 3/4", ms washer size 3/8", ms washer size 5/8", ms washer (different size), al. ht member, al. neutral clamp, fevicol, m.seal, ci cap (3/4"), ci cap (1"), ci cap different size, ms plug different size, da grey paint, white paint, red oxide paint, thinner, silicagel breather 200 kva, silicagel breather 100 kva, silicagel breather 63 kva, cotton waste, h.v.s.v. lamp (400w/250v)/ led flood outdoor light with ip 66 protection rectangular (100 w), ad varnish, note: gst must be define/ mentioned otherwise price part not be considered.

Central Government/Public Sector

CTN :39127845

13 Feb, 2025 NA

Prayagraj - Uttar Pradesh

Tender For supply of ss u bolts dia 10mm with nuts & lock nut for bracket insulator as per rdso specification no. ti/spec/ohe/fasteners/0120/rev/1 or latest.

Central Government/Public Sector

CTN :39128581

28 Feb, 2025 NA

Valsad - Gujarat

Tender For manufacture and supply of m.s. bolts & nuts

Central Government/Public Sector

CTN :39127835

13 Feb, 2025 NA

Saran - Bihar

Tender For supply of fish bolts & nuts of 25 x 140 mm

Central Government/Public Sector

CTN :39127749

05 Feb, 2025 NA

Gaya - Bihar

Tender For supply of bolts & nuts 25 x 90 mm t-11505.

Central Government/Public Sector

CTN :39116552

05 Feb, 2025 NA

Samastipur - Bihar

Tender For supply of hex. head bolt m16 x 90 high tensile to specification is:1364 (part-1):2002, is:1367 (pa rt-3): 2002 10.9, ce and rcf spec. no. mdts-057. grade & make should be clearly embossed at suitab le location of material( on head of bolts & at peripheral face of nuts) for easy traceability and verificati on and as per latest amendments of document no: rcf/mech/sb-m/2021/1 [ warranty period: 30 m onths after the date of delivery ]

corporations/Associations/Others

CTN :39126584

30 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For auction sale of sscrap reinforcement steel ms from works / products,scrap from works / products old and used miscellaneous strap,scrap miscellaneousellaneous used bolts and nuts ht from works / products,scrap pipe ms from works / products with,scrap prestressing strand ms

Central Government And Public Sector

CTN :39128316

07 Feb, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of set of bolts for muffler in 1400hp/1600hp demu dpc, qty & spec: as per annexure, make- tvs , dfl or unbreako

State Government

CTN :39125929

10 Feb, 2025 10.00 Lacs

Mandla - Madhya Pradesh

Tender For supply of plumbing electrical building materials item dist. jail mandla - bulb led 20,23,30,36 watt, mercury light 50,100 watt, choke tube light, tube light complete, wire bundle copper 2mm cable wire bundle, 3 phase wire bundle copper remit, switch, stand, tape roll, holder tube/bulb, mcb box, submersible motor pump cable 3 phase, tubelight rod, paste/lone, screws, nuts, bolts, pins 10,11,12,13,14,15 no, plas, pvc pipe 1 inch, half inch, ballast 10mm, 20mm cement, sand, bricks, spade, pickaxe, tiles, shovels, pipe pans

Ss Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors