Get complete information related to latest Starter Motor Spares Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Starter Motor Spares Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Starter Motor Spares Tenders.
Tender For lifting and lowering of 165hp/550volt, 150mtrs head 845gpm-5 stage submersible pump with motor set at laikdih colliery for raw water supply to laikdih colony at dbocp.
Tender For miscellaneous jobs related to e&m department: 1. pump motor with bed plate lifting from bp top section to bp bottom section & placing & fitting at b/p bottom section, b/l incline,2. tugger motor bed plate fabrication, 150hp pump-motor bed-plate fabrication, pump-motor transportationfrom b/l incline to domestic water supply pumping station, 3. pump-motor bed-plate re-fabrication by channel cutting &complete welding with gas & electrode at b/ l incline, 4. bedplate re-fabrication & 4inch ms pipe dismantling, loading ont/truck & unloading at b/ l incline, 5. track rollers dismantling, opening, roller changing of udm 611-150.
Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan
Tender For (a)lifting of 02 nos. of 2000 gpm pump-motor set multiple time due rapidly increase of water which supplies domestic water to the huchuktand (b) diversion and laying of new 10 inch m.s. pipe and 10 inch hdpe pipe for domestic water supply the marig
Tender For repair of mt vehicals - rear dickey door hings , rear beeding , drayaling assmy , wheel bearing front inner , wheel bearing front outer , kunckle bearing , kunckle kit , engine mounting , left side window glass frame , tail light and indicator cover , driver side door hinge , door rear, front right side rusty and broken portion thinkering, denting and gas welding , cabin to potion leaking. the portion cutting and finishing and filling , gas welding, tinkering and denting portion, duck door full, left side and right side and right side portion andbosy top leaking portion filing and finishing and painting , s no 01 to 11 all of parts moving and new parts fitting and engine tuning and wheel balancing and aligment and wheel road testing , front brake pav change , rear brake shoe change , master cylinder assy change , shok abosrber front change , the above mentioned parts removing the vehcile and new parts fitting labour charge , both side front and brake shoe , chains pocket kit , engine pulling power weak enigne remove and enigne full service with damage and burned, oil fuel and other require parts the engine mounting and testing , veh full loom system checking and burned loom change and full relays and lights, full connections checking and full electircal sustem service and testing , ignition key change , door lock both side lh and rh change , self starter assy repair service with burned and damaged parts armature, solonoid and brush holder and brush armauture solonoid and brush and brush holder change , brake shoe front andrear change , clutch assy , wheel bearing , head light doom , packing kit , clutch plate set , the above mentioned parts removing and and new parts fitting labour charge , hydrolic valve change , tyre inflantion change , pvr seat pressure pipe change , spc aasy change , door catch assy change , door catch change , bty cutt off switch , fuel lifting water seprator , fuel motor , door catch , door catch , coolent pipe change , pto pum , solent chain , hood warning light glass , accelerator pedal sensor , ac gas , pnecematic brake assy
Tender For corrigendum : supply of canteen kitchen equipments - double jacketed steam cooking vessel for cooking rice with gear box mechanism for decanting cooked rice ( capacity 200-250 ltrs ) as per purchase specification., double jacketed steam cooking vessel with ball valve for sambar / rasam preparation with gear box mechanism for decanting rasam / sambhar. ( capacity 300-350 ltrs.) as per purchase specification., double jacketed steam cooking vessel for grain / vegetable boiling with gear box mechanism. ( capacity 200-250 ltrs ) as per purchase specification., stainless steel vessel with covering lid ( capacity 200-250 kgs.) as per purchase specification., lpg burner consisting of 01 central burner of g-11 type and 4 outer burner of g-08 type with independent regulator for all 5 burners as per purchase specification., lpg burner with kadai size-at least 24 inch dia. kadai as per purchase specification., chappati press machine ( hand operated ) as per purchase specification., variety rice mixer suitable for lemon bhath, tomato bhath and cured rice bhath etc. with capacity - at least 50 kg / spell as per purchase specification., multigrain washer (capacity-50 kg./ batch) as per purchase specification., ingredient bin ( dimension- l*b*h=400mm*400mm*700mm + 50mm toleranceas) per purchase specification, storage rack -3 tier (dimension- l*b*h=2170mm*800mm*1790mm + 50mm tolerance with 3 racks equally distributed over the overall height ) as per purchase specification., storage rack -4 tier (dimension- l*b*h=2170mm*800mm*1790mm + 50mm tolerance with 4 racks equally distributed over the overall height) as per purchase specification., platform trolley ( dimension- l*b=1000mm*600mm+ 50mm tolerance fitted with 4 heavy duty castor wheels of 150mm dia) as per purchase specification., "utility trolley-3 tier (, minimum load carrying capacity of 80 kg as per purchase specification.", vegetable cutting table- ( l*b*h = 1800mm * 900mm * 750mm + 50mm tolerance with six legs and reinforcing bars at left half bottom as per purchase specification., tumbler washer fitted with 1/2 hp single phase motor as per purchase specification., wall mounted sink with knee operated water dispensing system, deck mounted paucet with lever valve as per specification., fly catcher as per purchase specification., "exhaust hood with duct and blower ( supply. installation and testing ) , dimension- l*b*h=4440mm *1540mm * 500 mm with +50 mm tolerance , exhaust duct and motor blower having capacity not less than 4000 cfm as per purchase specification.", "exhaust hood with duct and blower ( supply. installation and testing ) , dimension- l*b*h=5200mm *1540mm * 500 mm with +50 mm tolerance ,exhaust duct and motor blower having capacity not less than 4000 cfm as per purchase specification.", conventional wet grinder with stone lifting mechanism ( capacity-16-18 litres ) as per purchase specification., conventional wet grinder ( capacity- 7-8 litres ) as per purchase specification., conventional wet grinder ( capacity- 5 litres ) as per purchase specification., instant wet grinder ( capacity- 60kgs/hr ) as per purchase specification.,