Get complete information related to latest Steam Valve Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Steam Valve Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Steam Valve Tenders.
Tender For annual sectional contract for repairs & maintenance work and supply of material under aden/ hq-ii /jhs for year 2026-27 a) zone no-2a-2 jhs (railway station & circulating area) b) zone no-2a-3 jhs - stone aggregate (single size): 10 mm nominal size, bitumen emulsion, portland cement (opc-43 grade), white cement, c.p. brass extension nipple (15mm x 50 mm), oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, anodised aluminium butt hinges 100x63x3.2, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium handles 125 mm with plates 175 x 32 mm, satna lime, acrylic distemper 1st quality, haing voc content less than 50 grams/liter, premium plastic acrylic emulsion of interior grade, having voc content less than 50 grams/liter, aluminium paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coursed sand (zone iii), structural steel such as tees, angles channels and r.s. joists, galvanised steel or l hooks 8 mm dia, bolts and nuts up to 300 mm in length, 18 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c., mirror of superior make glass 60x45 cm, pig lead, gl pipes 15mm dia, gl pipes 20 mm dia, gl pipes 25mm dia, gi union 15mm nominal bore, gi union 20mm nominal bore, gi union 25mm nominal bore, gi union 50mm nominal bore, white plastic seat isolid) with lid c.p. brass hinges and rubber buffers, shower rose c.p. brass for 15 to 20 mm inlet 100 mm dia, shower rose c.p. brass for 15 to 20 mm inlet 150 mm dia, h.p. or l.p. ball valve with polythene floats: 15mm dia, h.p. or lp. ball valve with polythene floats: 20 mm dia, h.p. or lp. ball valve with polythene floats: 25 mm dia, full way valve with c.i. wheel (screwed end) brass 125 mm dia, brass full way valve with c.i. wheel (screwed end) 50 mm dia, vitreous china flat back wash basin 550x400 mm, c.p. brass waste 32 mm, c.p. brass waste 40 mm, vitreous china orrisa type w.c. pan of size 580 mm, vitreous china pedestal type water closet, ply wood 5 ply with commercial ply on both faces 6 mm thick, 12 mm commercial ply, common burnt clay f.p.s (non modular) bricks class designation 7.5, weather sealant -non staining (600 ml), c.i. sluice valve (with caps) class ii: 100 mm dia, c.i. sluice valve (with caps) class ii: 150 mm dia, red oxide zine chromate primer, gp-2 cememtitious compound, galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, frosted glass sheet of nominal thickness 4 mm (wighting not less than 10kg/sqm), aluminium hanging floor door stopper with twin rubber & stopper, hydraulic door closer tubular type aluminium section body, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, bottle trap, cp brass single lever telephonic wall mixer of approved make, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 75 mm dia, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 110 mm dia, upvc bend 87.5° 75 mm bend, upvc bend 87.5° 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long nose bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, c.p. brass angle valve 15 mm, binding wire, flushing cistern p.v.c. 10 litre capacity (low level-white) with fittings, accessories and flush pipe, white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556, 15 mm ptmt bib cock, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt push cock 15 mm dia, ptmt pillar cock (fancy) 15 mm foam flow, turpentine oil, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, sbr polymer, premium acrylic exterior paint(p.way training center)
Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement
Tender For supply of "machine cutting torch with three hose connection along with reverse flow control valve without rack to use with propone gas to model no.198-2taf-35 of m/s harris". [ warranty period: 12 months after the date of delivery ]
Tender For set of valve comprising of three items as detailed below: 1)base valve to rexroth model no 4weh 16e 7x/u (r900923719) %u2013 qty- 1 no. 2)flow control valve to rexroth model no z2fs6-2-4x/2qv(r900481622) -qty -1 no. 3)dc valve to rexroth model no 4we6 j 6x/ew 110 n9k4 (r990551703)-qty-1 no. of make rexroth only for cnc gantries ofa & b shop use in hydraulic system. special conditions: 1)warranty period: warranty of 18 months from the date of delivery or 12 months from date of fitment or use whichever is early. 2)oem or authorized dealers/agents with valid authorization from the oem are eligible to quote. 3)technical catalogue to be provided with the material supply. [ warranty period: 18 months after the date of delivery ]
Tender For 'design, supply, installation, & commissioning' of motorized valve and water flow meter system at washing pits in coaching depots of ljn division /ner.