Latest steel angle Tenders | Government steel angle Tenders

Central Government And Public Sector

CTN :39581299

04 Apr, 2025 9.59 Crore

Multi City - Karnataka

Tender For supply of furnitures and other items to super speciality hospital, bmcrc, ballari - key holder-50 with lock 2ft x ft, notice board with lock 6x4 ft box type with glass shutters, white board 4ft x 3ft, white board 8ft x 6ft, help disk table or reception table, coffee table or centre table, auditorium chairs with desklet, e podium digital, training room chair with desklet, book rack., personal locker unit with door and lock, optimizer mobile racking system for record room, dinning chair, dinning table 6 seatere, dinning table 4 seater, exam couch bed, stool chair, two seater sofa, ss table, aluminum racks with slotted angle, workstation, conference table., storage racks, cupboard, linen trolley, nursing station, bedside lockers., lounge chair 3 seater inside consultant room, lounge chair 3 seater, visitor chair, executive chair, chief consultant table, consultant table

State Government

CTN :39388359

10 Mar, 2025 60.00 Lacs

Katra - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of 01 no of table top powder xrd at school of physics smvdu kakryal katra - supply and installtion of table top powder xrd with detailed specifications as follows:, x-ray generator: max. continuous rated output: 600 w guidance based software system, voltage: 20- 40 kv with increment of 1kv / current: 2 15ma with increment of 1ma (variable voltage and current). ht stability better than +/-0.01% for mains stability +/- 10 %.x-ray tube:cu target with 1000w and k-beta filter, should be upgradable for cr, co & fe.goniometer:high precision, vertical type, goniometer with theta two theta geometry, range: -3 to +1400 or better, radius: 150mm, scanning speed: 0.01 ~ 100 degree/min, max scanning speed: 500deg/min, sollar slit(incident & receiving): 2.5 deg, incident height limiting slit(dhl): open (10mm), necessary software and hardware for diagnostics capable of checking the equipment parameters/ calibration etc.divergent slit:variable to keep the x-ray illumination of sample same from low angle to high angle of 2 theta. detector:high speed silicon strip detector, it should work in 1d mode. also fluorescence reduction mode should be available. cu efficiency 99% samples holder: glass (0.2mm) qty 20, glass(0.5mm)-qty -20, aluminum (20 mmx20 mm) hole - qty 20, low background si sample holder- qty 02software: guidance based software system software should have a provision for the following: 1) all active operations should be controllable through the software 2)simultaneous data collection and data processing facility. facilities for peak search, peak match, and pattern treatment such as data smoothing, background subtraction, 2 correction, 3d multiple pattern display, k 2 calculation and removal, integrated intensity calculation, relative intensity ratio (rir) quantitative analysis and crystallite size. xrd-rietveld analysis. hybrid search / match algorithms which combines the features of peak based and profile based, phase identification techniques. it offers improves, qualitative analysis performance which makes, identification of crystalline phase with preferred, orientation or a complex lattice deformation.computer systems:latest pc along with latest operating system (latest 8.1 or 10), laser colour printer, necessary software for operation and data acquisition, analysiscod-data base:software is compatible with cod (crystallography open database) which is available on internet. (internal /external ) chiller:suitable compact for smooth running of xrd ups: online 6kva with 30 mts. backup.installation and commissioning: the instrument to be installed tested and commissioned by representative of supplier at our premises to the satisfaction of user free of cost.training: the supplier should provide the training on site free of cost.safety:the system should be housed in a high safety standard radiation enclosure as per international norms.warranty: at least one year from the date of installation(the supplier should provide the certificate of successful installation of benchtop xrd from the head of the department of concerned government labs/ institutes. )

State Government

CTN :38601213

08 Mar, 2025 NA

Talwara - Jammu And Kashmir

Tender For bid to ras supply of stage lighting of matrika auditorium - sitc of high performance led beam projector fixture , sitc of led ubpl fixture , sitc of led light source features 400w 36v inbuilt smps , sitc of pc wing controller , sitc of the dmx data repeater operates on a voltage range of 100 to 220v , sitc of fixture equipped with a 200w original , sitc of product featuring a flicker free led lamp , sitc of product powered by a 400w led light engine , sitc of lighting fixture which supports multiple control modes , sitc of high quality dimming out junction box 1 way , sitc of high quality power junction box 1 way , sitc of 2 core cable with sheathed housing , sitc of frls copper unarmored flexible cable , sitc of desktop computer , sitc of suspender cum clamps , sitc of dmx male female connectors 3 pin gland , sitc of 48 way power marshaling box sitc of high-performance led beam projector fixture capable of producing a precise and bright color range suitable for dynamic lighting applications. optics: lens angle: 25 degrees, providing a versatile light spread for various lighting needs. holder: size 20x15mm, color black. surface type: bead surface with concave frosted finish. control & performance: dmx channels: 8 dmx channels with 8-bit color mix mode for customizable control over color and effects. voltage: operates within a range of 100-220v at 50/60hz. power: total wattage of 140w, with maximum power consumption capped at 200w with a smps of 26 volt 3.2 amp current. red wattage - 21.6watt, green wattage - 45watt, blue wattage - 40 watt, white wattage - 39watt with total of 1 ampere of current. housing and finish: material: durable cast aluminum. color: black powder-coated for a sleek finish. ip rating: ip65, suitable for outdoor environments. along with ip65 power and dmx connectors bid number/ ( ( ) ) : gem/2024/b/5711214 dated/ * : 16-12-2024 bid document/ 2 2 1 / 27 suitable for any weather conditions certifications and compliance: ce, iso, and rohs certifications for safety and reliability. weight: >5.0 kg, making it portable and easy to install. make in india certification to be provided. installation and requirements: the supplier is responsible for complete installation and commissioning, ensuring integration with existing systems. operational training to be provided to designated personnel. submission of a product datasheet is required. required 3 years warranty., sitc of led ubpl fixture which operates on an ac voltage range of 100-240v 200watt and 1.240 ampere current and a inbuilt smps of 200w 36volt and 5.3amp of current which offers luminous options of reputed brand lm-80 certified led with chromaticity of a warm incandescent bulb. colour temperature cri & tlci values equivalent or greater than 90 designed for efficiency lux@5 meters is above 4500 at 26 degrees, total power is 300w. power interface: power connector input / output. signal interface: three-core dmx signal input / output. advanced optical systems ensure clear imaging quality. control panel: lcd panel + 4 buttons. it performs well in environments with ambient temperatures below 40 c and maintains a maximum surface temperature of 85 c. the light has a net weight of > 8.0 kg and a gross weight of > 10.0 kg, flicker-free, thanks to pwm frequency adjustment, up to 25 f./sec. 4 blades manual framing system, dmx monitoring. remote access through rdm. aluminum structure body. beam angle options of 26 for versatile lighting effects. outstanding strobe effect, with adjustable speed. no flashing under the hd camera. heat dissipation mode: air cooling. intelligent fan speed regulation: the fan will not work when the lamp is not lit. the fan will change with the temperature change, thus reducing the noise of the fan and creating a good performance environment. maximum tolerable ambient temperature: 40 c. maximum tolerable surface temperature: 65 c. minimum acceptable working temperature: -5 c. it is dmx512 controlled and measures 340 x 270 x 650 mm, ma

Central Government And Public Sector

CTN :39320505

07 Mar, 2025 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of cloth leather pvc black , steel angles 20-20-3 mm , steel angles 25-25-3 mm , steel angles 65-65-10mm , electrodes wlding steel armour 5.00mm , steel bar carbon hot rolled square 40mm , isopropyl alcohol , m seal

CTN :39562483

25 Mar, 2025 NA

Sirohi - Rajasthan

Tender For supply of barrack and road or electric and mechanic items - cp wall mixer 3 in 1 with provision for overhead and hand shower and 190mm long bend pipe , glass corner shelf for bathroom or transparent bathroom shelf for wall glass or bathroom corner organizer 9x9 inch pack of 3 , multi purpose wall hung transparent glass shelf for bathroom 18x6 inch pack of 1 , pvc angle holder bulb 240v , fan capacitor 2 point 5 mfd 52mm length 27mm dia , bakelite fancy angle holder for electric fitting , tube light 2 feet led 20w , pluto flat ultra modern light 600x600 mm 36 watts , led t l fitting 20w 4 ft aluminum housing , three phase digital electronic meter capacity upto 60 amp , flame proof switch upto 15amp , calcium hypochloride grannule , gi union 25 mm , gi union 40mm , gi union 50 mm , gi union 65 mm , gi union 80mm , three phase dol star delta pump starter 7 point 5 hp , three phase dol star delta pump starter 10 hp , contactor 250 amp 4 pole , flood light led 150w ip 66 color warm white , mccb 4 pole 250a , can type power factor capacitor 3ph 5 kvar , can type power factor capacitor 3ph 10 kvar , can type power factor capacitor 3ph 12 point 5 kvar , can type power factor capacitor 3ph 15 kvar , mccb 63a 4 pole 36ka , aluminum cable lugs 120 sqmm , aluminum cable lugs 150sqmm , aluminum cable lugs 185 sqmm , aluminum cable lugs 400 sqmm , aluminum cable lugs 300 sqmm , aluminum cable lugs 50 sqmm , aluminum cable lugs 35 sqmm , aluminum cable 35 sqmm 3 point 5 core , heating element 2kw brass type , screw fastener 10mm , metal clad box for geyser with 15 amp mcb , thermostat 250v for geyser brass type , pipe 24 inch hot and cold type for geyser , plug top with connection wire for geyser 3 core multi standard , 4 sqmm wire copper

CTN :39272596

07 Mar, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras tender for supply of hdpe sand bag of size 15inch x 30inch under job no 2215 mta , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make-birla gold , ambuja , ultratech , acc , jk , dalmia , cgi sheet 10feetx3feet make-sail , tata , jindal , cgi sheet 8feet x 3feet make-sail , tata , jindal , cgi sheet 12feet x 3feet make-sail , tata , jindal , ppgi roofing sheet 10feet x 3feet long and thickness 0.63 mm with grard film as per store list , hdpe cover tarpaulin 30feetx30feet long make-standard , hdpe cover 20feetx15feet long make-standard , synthetic paint enamelled white confirming to is 5-2004 make-berger , asian , nerolac , synthetic paint enamelled black confirming to is 5-2004 make-berger , asian , nerolac , ms squire pipe 2inch x 2inch isi marked , electric geyser 5 star of capacity 25 ltr make-v-guard , racold , bajaj , crompton , pvc insulated sheathed heavy duty armoured electric cable with aluminium conductor 16 sqmm 4 core as per store list , plywood 4feet x 8feet x 12mm termite resistant and bwr cofirming to is 1328-1996 make-supreme , assam , green ply , kit ply , isi mark , mcb single pole 32 amp capacity b series confirming to is 8828 of 1996 make-havells , l and t , standard , led tube light fittings 15 w box type 4 feets with crca body pre coated white and prewired for led tube complete make-havells , bajaj , philips , crompton , exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings make- bajaj , havells , crompton , synthetic paint enamelled og confirming to is 5-2004 make-berger , asian , nerolac , synthetic paint enamelled red confirming to is 5-2004 make-berger , asian , nerolac , plywood 4feet x 8feet x 6mm termite resistant and bwr confirming to is 1328-1996 make-supreme , assam , green ply , kit ply , isi mark , mattress 6feetx3feet x12mm make-kurlon , sleepwell , corform , hdpe water proof cover 15feetx15feet , make-shalimar , ro repair job no 3980 and 3662 , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core as per store list , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts as per store list , led street light 40w make-havells , bajaj , phillips , crompton , synthetic paint enamelled yellow confirming is 5-2004 make-berger , asian , nerolac , door hinges 75mm isi marked , aldrop complete set make-standard , tower bolt 6inch , make-anjali , brass chromium plated shower rose 100 mm dia with bend make-ess ess , prayag , johnson suisse , looking mirror of selected quality frameless of size 600x450x5mm make-prayag , saint gobian , modigaurd , switch piano 5 amp 230 volts flush type one way snow white make-anchor , ssk , cona , plug top 5 amp , make-anchor , ssk , cona , plug top 15 amp , make-anchor , ssk , cona , mcb spn 240 volts 32 amps make-havells , l and t , standard , wire flexible multi strand copper conductor multi stranded 0.0023 , 76 make-havells , finolex , paragon , mcb sp 6 to 32 amps make-havells , l and t , standard , exhaust fan heavy duty metal frame of 230 v for 450 mm sweep make-bajaj , crompton , usha , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame 9chowkat made of steel equal angle iron 55x55x6mm as per store list , supply , installing , testing and commissioning of heavy duty industrial grade dehumidifier 0.2 ton 15 lpd single phase 230 volt , fire extinguisher of one kilogram capacity , dry power type conforming to is-13849 along with its accessories , pvc switch board snow white size 8inch x 10inch for main switches , db make-supreme , polycab , finolex , service cable pvc insulated aluminium conductor , 1100 volt grade heavy duty 10 sqmm 2 core as per store list , non skid ceramic tiles of size 300mmx300mm on the floor. minimum thickness shall be between 6-8 mm tiles as per store list , synthetic paint enamelled brown confirmi

CTN :39555984

25 Mar, 2025 NA

Jaisalmer - Rajasthan

Tender For supply of procurement of barrack and road items - wire mesh 4 ft wide , gm gate valve 20mm dia isi mark , gm gate valve 25mm dia isi mark , grating round ss floor drain trap 5 inch 127mm , grating round ss floor drain trap 5 inch 127mm with waste hole , helical door spring 150 mm , hexa blade 1 inch double side , holding bracket 600mm long for whb 24 inch , hydraulic door closer classic 90 degree universal , pvc internal kit for flush cistern with dual flush , pvc internal kit for flushing cistern single flush , looking mirror 450 x 600x 6 mm with aluminum or pvc frame , ms butt hinges 100 mm , ms handle for window , nails size 1 inch and 2 inch no 14 , cp peg set of 06 , pvc angle cock 15 mm , pvc angle cock 15 mm two way , pvc ball cock 15 mm with ball and rod , pvc ball cock 20 mm with ball and rod , pvc ball cock 25 mm with ball and rod , pvc bib cock 15 mm , pvc connection 15 x 450 mm , pvc connection 15 x 600 mm , pvc flushing cistern 10 ltr cap , pvc health faucet with tube 1 point 5 mtr and hook , pvc jet spray with 1 point 5mtrs connecting tube , pvc overhead shower round 3 inch , pvc pillar cock 15 mm , pvc pillar cock 15 mm swan neck , pvc pipe 80mm dia 3 mtr long , pvc rawl plug 50 mm and 8mm dia , pvc sheet white 8 feet x4 feet x6mm , pvc stop cock 15 mm , pvc tank cover lid white , pvc toilet seat cover for ewc, , pvc urinal waste pipe 45mm dia , pvc waste coupling 32mm dia full threaded , pvc waste pipe 32 mm , rubber beading 75mm wide 25mm , sink without drainge board made of ss 1mm thick for kitchen size 915 x 460mm , sink with drainage board made of ss 1mm thick for kitchen with plugs overall size 915 x 460mm bowl size 410mm x 330x160mm , sliding bolt handle 300mm , cp soap dish holder , solvant tube 20ml , ss curtain support set , ss handle 100mm with machine screw , stainless steel kitchen sink coupling 114mm , gi tank connection nipple 25mm , gi tank nipple 20mm , teflon tape 20 to 40mm width 21 to 30m long , tower bolt aluminum 100 mm , tower bolt aluminum 150 mm , wall putty powder asian paints , wash hand basin 46 x 33 cm , water storage tank 1000 ltr cap dl , water storage tank 500 ltr cap dl , white cement

CTN :39594716

26 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of centrifuge angle rotor for 24 x 1.5/2.0 ml tubes, with aluminum lid as per item 1 of specification,centrifuge angle rotor for 6 x 50 ml tubes as per item 2 of attached specification

CTN :39322330

06 Mar, 2025 NA

Tinsukia - Assam

Tender For corrigendum : supply of ord head - cutting ewheel , sealing compound anabond , abb emery paper , plywood , steel angles , iron sheet , steel welding rod , governer , rubber matting , steel angles 50x50x5mm , sheet celluler 25mm thick , injector nozzle , insulation tape

CTN :39554690

25 Mar, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of steel angle 25x25x5mm , steel angles 30x30x3mm , plywood general purpose , nails steel wire round 30mmx2mm , screw wood slotted csk head brass no 10

Steel Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

Central Government And Public Sector