Latest steel bolt Tenders | Government steel bolt Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38568896

08 Jan, 2025 NA

Hubli - Karnataka

Tender For supply of set of stainless steel bolt, nyloc

Central Government/Public Sector

CTN :38583407

16 Jan, 2025 NA

Jodhpur - Rajasthan

Tender For supply of g.i. coated hex bolt size - m8x35 (full threaded) with nut washer, plain washer

State Government

CTN :38421009

19 Dec, 2024 NA

Nainital - Uttarakhand

Tender For corrigendum : supply of de-centralized material for estimate work of 11 kv line for underground work at railway station ramnagar - supply of holding clamp sp33 with nut & bolt., supply of holding clamp for sp-55 with nut & bolt., supply of bracing clamp top sp-55 with nut & bolt., supply of holding clamp fpr gi pipe 8/10& ms ch., supply of stay clamp for sp-55 with nut & bolt., supply of stay clamp for sp-33 with nut & bolt., supply of gi pipe dia 150 mm., supply of h.d.p.e pipe 50mm.

State Government

CTN :38581934

26 Dec, 2024 NA

Dapoli - Maharashtra

Tender For purchase of necessary materials- gi bend 4" , welding flange 4" , ci nrv 4" , welding flatice 6" , m.s.reduce 6"x4" , apollo c clas/pipe gi , m.s. service saddle6"x2" , gi barrel nipple2"x4" , welding flange 2" , gi air valve?" , pvc tail piece 6" , nut bolt 2.5 ss , rubber pack-rig-4" , gix nipple 2" , rubber packing-6" , pvc solution 100 ml. , by pass air valve 1"

State Government

CTN :38589201

07 Jan, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of sec clip w_r type,clamping angle,clamping angle,bull dog clamp stainless steel grade 304 u clamp size 12 mm with inner dia 13 mm along with 10 mm nut and m10 spring washer,ss bolt dia 12x50_45mm,ss nut dia 16mm,copper split pin dia 4x40mm,g i bolt dia 24x70_54mm,g i bolt dia 16x100_38mm,g i bolt dia 16x260_57mm,g i bolt dia 16x260_60mm,g i bolt dia 16x360_57mm,g i bolt dia 16x65_38mm,g i bolt dia 16x260_100mm,g i bolt dia 16x360_80mm,g i bolt dia 16x360_100mm,g i bolt 16x50_37mm,g i bolt 16x320_100mm,g i nut dia 16mm,g i nut dia 20mm,g i lock nut dia 16mm,g i lock nut dia 20mm,g i flat washer dia 10mm,g i flat washer dia 16mm,g i flat washer dia 20mm,gi punched washer 22 mm,g i spring washer dia 10mm,g i spring washer dia 16mm,g i bolt dia 20x50_46mm,g i bolt dia 20x280_65mm,g i bolt dia 20x210_65mm,g i bolt dia 20x310_65mm,g i bolt dia 20x550_65mm,g i bolt dia 20x65_46mm,g i bolt dia 20x85_46mm,g i tappered washer dia 16mm,g i tappered washer dia 20mm,gi bolt 10x35_30mm,gi dia 10mm nut,gi 24mm dia lock nut,s

Central Government / Public Sector

CTN :38538738

26 Dec, 2024 NA

Multi City - Multi State

Tender For supply of g.i. bolt of size: 12x45x30mm with nut, flat and spring washer as per rdso specification no.ti/spc/ohe/fasteners/0120 (rev-1) or latest

CTN :38526292

08 Jan, 2025 39.38 Crore

Jaipur - Rajasthan

Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar

Central Government/Public Sector

CTN :38532854

21 Dec, 2024 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of anchor hook outer wall 406328rhf,anchor hook outer wall 406330rhf,anchor hook outer wall 406331rhf,holding angle i o wall 406332rhf,anchor hook s.11 h 404430 rhf,anchor hook s.12h 404427 rhf,anchor bolt burner block guard 406294rhf,anchor hook 4 04438 rhf,stainless steel bolt with nut m20 70 rhf,ss he bolt nut washer m16 50,stainless steel bolt m16 100 rhf

State Government

CTN :38175642

20 Dec, 2024 NA

Diglipur - Andaman And Nicobar Islands

Tender For corrigendum : supply of dg set shed - stone aggregate 40mm , stone aggregate 20 mm , pulverized sand , river sand fine , cement , ss nut and bolt full thread with each 2 , gi l angles , g.s roofing sheet , ridges plain , stainless steel self trapping screw , wire nail , aluminium tower bolt , aluminium handle , ss hinges, heavy , synthetic enamel paint , wood primer , ss screw

Steel Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors