Get complete information related to latest Steel Construction Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Steel Construction Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Steel Construction Tenders.
Tender For repair to the existing drainage near dadu house ward1 rafik house ward2 near amul bar restaurant and mahesh ward3 near mochichemol ground ward6 near masjid dhanu near abrar salam ward8 shaud nanda ward9 sbi city hall masoor ward10 of vmc
Tender For supply of general pupose hydraulic jack light weight alloy steel 50 toncapacity x 100 mm stroke single acting spring return & plainram with freem oil seal kit for working pressure 700 bar withmake hydraulic hand pump suitable for operating singleacting 50 tons capacity x 100 mm stroke 1 no. steel bodysingle acting & two speed /stage, oil tank cap 5 liter & built inrelief valve, filer vreather cun drain plug, lifting handle formax. working pressure 100 bar(a) quick disconnect couplerset with steelconstruction for working pressure :0-1000 bar,pressure gauge, glycerin filled (b) high pressure thermoplastichose pipe meter with eng fitting for working 700 bar alongwith above accessoriesmake: masko tech, vankos, hydrodynamics only required, hydraulic low hight jack light weight alloy steel 100 tonscapacity x 60mm stroke single acting spring return & plainram with free oil seal kit for working prassure 700 bar withmake hydraulic hand pump suitable for operating singleacting 100 tons capacity x 60 mm stroke 1 no steel bodysingle acting & single speed/stage, oil tank cap:3 liters &built in relief valve, filer vreather cun drain plug, lifting handlefor max. working pressure 700 bar along with aboveaccessories (a) wuick disconnect coupler set with steelconstructin for working pressure 100 bar.(b) high pressurethermoplastic hose pipe 2 mtr. long with end fittings forworking pressure 700 bar(c) bottom mounted with gaugeadapter, stand pipe & end fittings pressure: 0-1000 bar,pressure gauge, glycerin filled make: masko tech, vankos,hydro dynamics only required , double ended open spanner, size 46x51 make taparia,stanlay, or similar , supply , installation and commissioning ofautomaticoperated ro water purifier 120 ltr capacity with1year company warranty with full consumable andadditional2 year full comprehensive amc , portable water coolers with inbuilt ro purification as perattached annexure "a", make/brand bluestar/kent/eureka forbes/voltas/aqua guard , industrial safety helmet of size 600 mm with isi certified asper detailed description/specification attached annexure-a,colour as per requirement of consignee at time of delivery , ratchet type torque wrench of capacity 68-340 nm, 1/2accepted make : mcmaster, stanley, de neers ,griphold, chicago pneumatic, norber (uk), stahlwilleonly , ratchet type torque wrench of capacity 135-675 nm, 3/4"make: taparia / stanley / gedore / mcmaster only , ratchet type torque wrench of capacity 110-550 nm, 3/4accepted make : griphold, chicago pneumatic,norber (uk), stahlwille or taparia only , ratchet type torque wrench of capacity 50-220 nm, 1/2" sqdrive. make: chicago / griphold / ingersoll rand/stanley/deneers only , ratchet type torque wrench of range 10-70 nm with 1/2sq.drive. note:material to be supplied with calibrationcertificate and warranty certificate. make: mcmaster,stanley, de neers , griphold, chicago pneumatic,norber (uk), stahlwille , weather seal silicon sealant 280 ml makedr.fixit/pidilite/loctite/dowsil/anabond. themanufacturing date should be within one month at the timeof delivery , roofing felt bitumen self finished in rolls of 90cmx20mtrs.specn: bis specification no:is:1322/1993(latest amendt.) typeiii , tarplastic bituminous compound for water-proofing andcaulking purposes used steel drum packing material, multipurpose plastic sheets are made from longlasting, sturdy and durable waterproofling plasticsheets. polysheet suitable for covering 1400 hhpdmu dpc iv coupler., silver industrial duct tape, length 50 meter.(detailed spec. asper product 1 of gem contract no. gemc-511687728770802dt. 18/05/2024) , tamper check paste(30 ml)(highly visible, viscous andfluorescent in nature) as per attached specification colour:red/orange, tip size: 2.9 mm, extra nozzle of 1 mm and 2 mmshould be provided. epoxy adhesive consisting of standard epoxy resin ina pack of 1000 grams & hardener in a pack of 800grams conforming to specification no.is: 12994/1990-2005.containe
Tender For repair and renovation of new block comprising 7(seven) rooms with corridor, bar, dining, kitchen, off-shop, managers and staff quarters (5nos) and new construction of a gas bank, electric panel room, compound lighting along with roof treatment..
Tender For supply of m and l for dismantling of existing cold storage complete with accessories and deposite inner and outer units at mes store yard as specifed and directed , m and l for submain wiring with 2 run of 10 sqmm frlsh pvc insulated 1100 v grade copper cond 1 core cable and inc pvc conduit of adequates size and fittings , s and f as in repair mcb db tpn dd 4 way incl bus bar neutral link earth bar and din rail recessed with wall surfaces by chase cutting and making good surfaces of wall as specifed and directed , s and f as in repair mcb db spn dd 8 way incl bus bar neutral link earth bar and din rail recessed with wall surfaces by chase cutting and making good surfaces of wall as specifed and directed , s and f inrepair mcb tpn 63 amps 415 v breaking cap 10 ka comp all as directed , s and f in replacement mcb sngle pole 240 v of cap 6 to 32 amps ce series breaking cap 10 ka , s and f in repair mcb spn 16 to 32 amp 240 v breaking cap 10 ka , vmc machine (v1) (q3)
Tender For supply of raw materials - phesphir bronze bar , s80 (10 mmd) , sbr 20mm , round bar 12mm , steel bar round 100mm , steel bar hex 14mm dia , steel bar round 150mm dia , sbr 20mm(30khgsa) , steel bar hex 22mm dia , steel bar roung 80mm , steel bar round 60mm dia , steel bar hex 9mm , steel bar hexagonal 10mm dia , sbr 15mm (en 24) , steel bar round 90mm dia , round bar 70mm , hexagonal steel rod 22mm , round bar 32mm , steel bar round dia 24mm , round bar dia 24mm , stainless steel round bar dia 25mm , bronze rod 45mm , steel rod , bar 10mm , steelconstruction 10mm , hexagonal bar 8mm , steel hex bar 10mm , ak4-1 round bar 70mm dia , steel bar round 60mm dia , steel bar round 60mm dia , stele bar round 8mm , steel bar round 22mm dia , steel round bar 40mm , steel bar round 15mm dia , steel bar hex 27mm dia , round bar 80mm , steel bar round 10mm (2590-88) , steel bar round 125mm dia
Tender For procurement of spares for annual maintenance contract of chep-i - lpg gas refilling, oxygen gas refilling, mobil oil 600 xp 220, pvc insulation tope, repair cooling water pumps 3.5 /3 hp( monoset pump), champion gasket 0.5mm/1mm/1.5mm( 06 kg each.), hrc fuses 2a/4a/6a/10/16a (08 each), nitrogen gas refilling ( working pressure 200 bar), proportional valve ( moog make)(repair), rtds as per sample, crc 226 (400 ml), governor hydraulic hose pipe 22mm dia 4 feet length for opu with end fittings and clamps( indo- makkisson 2at-im-8 hi-impulse din en853)
Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - educational institute; open gym equipments; service provider - air walker, chest press, cross trainer, air walker, horse rider, hyper, leg press, parallel bar, rowing machine, shoulder press machine, abdominal board, twister, sky walker, push up bar, treadmill, horizontal bar, surfboard, thrill, weight machine, monkey bar, butterfly, hanging thrill
Tender For procurement of seamandship items iii - heavy duty chopper ms with wooden handl , firemans aintoe ms with wooden handle , portable fenders apple fenders , puma plate aluminium as per sam , wooden blocks 50into15into15cm , anchor buoy plastic 18 inch , creeper grapnels , chipping hammer and scrubber , life buoys , heavy duty deck washing machinealong wit , chain pulley , ear defenders , safety harness with anchor , cargo net swr 10mm 4into4mtrs lintob , cargo net swr 12mm 4into4mtrs lintob , rope nfc manila 3 stramded size 32 , rope nfc manila 3 stramded size 28 , rope nfc manila 3 stramded size 24 , splicing tool kit heavy duty , chain hook , cable tools with bag maul tommy bar bot , cable bag comprising following a topsw , hydraulic hand held pellets with wooden , emergency tool bag canvas pvc 35into13into13 , marline splike teak wood 8 inches , marline splike teak wood 22 inches , flags , crash boat bag basic first aid kit06 , flag disk white blue and red , wooden toggle 30mm dia , boat hooks large , safety helmets for boat crew size medi , white seat covers for all boats , collar repair kit for rhbs , pp rope 16 mm , pp nylon seizing rope 3mm , link 278 o.d. into 128 o.d. into 22 mm dia , ras bag , test weight 135 kgs , emergency breakaway boards for light jac , emergency breakaway boards for heavy jac , emergency breakaway boards for abeam fue , signalling wands red green and amber , deck illumination light at various locat , hull contour lights , aluminium ladder foldable large as pe , eye wash , bottom lines pp rope 16mm dia , divers lines pp rope , swivel piece bointo type , towing rope
Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &