Get complete information related to latest Steel Fencing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Steel Fencing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Steel Fencing Tenders.
Tender For corrigendum : dr masony near nehru park,balance portion of existing dr protection wall and steelfencing for protection of thodu from waste disposal near pallithazham chottanikkara pwd road side is also included in the estimate
Tender For sw-i) bza division : bza-pua section (den/c/bza): provision of safety fencing along the track for speed 130 kmph and above using nhai anti-crash barrier / w-beam steelfencing for 76.06 km fencing length (phase-ii) in aden/ee sub-division (irpsm id.no.11.06.16.24.3.55.016 of 2024-25)
Tender For w-i) bza division : kvdu - bza section (den/c/bza): provision of safety fencing along the track for speed 130 kmph and above using nhai anti-crash barrier / w-beam steelfencing for 90.56 km fencing length (phase-ii) in aden/bpp sub-division (irpsm id.no.11.06.16.24.3.55.017 of 2024-25)
Tender For sw-i) bza division : kvdu - bza section (den/c/bza): provision of safety fencing along the track for speed 130 kmph and above using nhai anti-crash barrier / w-beam steelfencing for 55.00 km fencing length (phase-i) in aden/bpp & ee sub-divisions (irpsm id.no.11.06.16.24.3.55.012 of 2024-25)
Tender For ru - kdp & gdr - tpty : safety fencing / boundary wall along the track for speed 130 kmph and above using nhai anti crash barrier / w-beam steelfencing for 85kms (phase - i).
Tender For guntakal division: kondapuram-gooty (up&dn):- provision of safety fencing all along track for 130 kmph and above using nhai anti-crash barrier/w-beam steelfencing for 20 km fencing length (phase-1)
Tender For tender for supply of weld mesh panels should produced by electrical resistance welded galvanized wires and subsequently powder coated as per specification attached in pdf file. , omega clamps with profile cover plate to tighten the mesh panel along the post with 76mm dia 35mm width and 3 mm thickness as per specification attached in pdf file. , mushroom head bolt nut with washer each clamps will be supplied with a pair of ss 304 mushroom headed square necked bolts and security nuts m8 x 50 as per specification attached in pdf file. , fence post. type circular hollow material ms steel tube is 1161. dimentions 76 mm dia and 3.2 mm plus or minus 10 percentage thickness as per specification attached in pdf file. , straining y arm for supporting top ptcc material. ms angle size 50x50x5mm as per is 1852 as per specification attached in pdf file. , accessories for fitting y arm. mushroom head bolt with breakable head safety nuts. each y arm shall be supplied with two sets mush room headed bolts with security nuts and washers as per specification , intermediate y arm for supporting top ptcc material ms angle size 50x50x3mm as per is 1852 coating as per specification. , accessories for fitting y arm. mushroom head bolt with breakable head safety nuts. each y arm shall be supplied with two sets mush room headed bolts with security nuts and washers as per specification attached in pdf file. , anchor rod. 10 mm dia 300mm long gi rod tie with fence post at bottom using tie wire. 02 nos for each post , punched tape concertina coil including spike and handle with 56 turns and dia 610 mm having a core wire of high carbon spring steel of high tensile strength as per specificationattached in pdf file. , galvanised steel barbed wire isi marked a5 designation for galvanised steel barbed wire for fencing shall conform to is 278 1978 as per specificationattached in pdf file. , quick setting compound as per specification attached in pdf file. , aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383 of 1970 as per specification attached in pdf file. , aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383 of 1970 as per specification attached in pdf file. , ms binding wire not less than 0.9mm dia confirming to relevant is as per specification attached in pdf file. , natural sand confirming to is 383 of 1970 as per specification attached in pdf file. , portable welding machine , wire cutter 18 inch , aluminium ladder 9 steps , hand gloves leather 500 g , hand gloves canvas , hand gloves rubber , bold cutter 12 inch , y joint 10 feet long , y joint 12 feet long , hammer sledge 4lbs , steel gurmala or planer , plumbob and mason thread , cutting pliers size 8 , showel with wooden handle , hacksaw frame , wooden gurmala , ratchet spanner single socket 14 sproket , trowel masson brick carandy , water level pipe 100 m , hack saw blade double ended , measuring tape 5 mtr , measuring tape 30 mtr , axis pick with wooden handle , iron cutting machine , drill machine complete set , drill bits complete set , ratchet spanner with deep socket 12 or 13 mm , welding rods , hog ring curd less rebar tying gun machine battery operated tying wire dia meter 0.8 to 1 mm battery capacity 4400 mah alongwith tying wire suitable for machine and length of 500 mtrs , rivet gun machine , binding stick , tasla iron 18 inch , hdpe water storage tank 500 ltr , fawada with wooden handle , crow bar 5 feet long , bolt cutter 32 inch , wire cutter 150 mm , suction cum delivery pipe plastic 1 inch dia 200m long , iron cutting machine blade , alluminium straight edge 50mm sq 2 mm thick 1800mm long
Tender For tender for supply of security fence anti climb - weld mesh panels should produced by electrical resistance welded galvanized wires and subsequently powder coated as per specification attached in pdf file. , omega clamps with profile cover plate to tighten the mesh panel along the post with 76mm dia 35mm width and 3 mm thickness as per specification attached in pdf file. , mushroom head bolt nut with washer each clamps will be supplied with a pair of ss 304 mushroom headed square necked bolts and security nuts m8 x 50 as per specification attached in pdf file. , fence post. type circular hollow material ms steel tube is 1161. dimentions 76 mm dia and 3.2 mm plus or minus 10 percentage thickness as per specification attached in pdf file. , straining y arm for supporting top ptcc material. ms angle size 50x50x5mm as per is 1852 as per specification attached in pdf file. , accessories for fitting y arm. mushroom head bolt with breakable head safety nuts. each y arm shall be supplied with two sets mush room headed bolts with security nuts and washers as per specification , intermediate y arm for supporting top ptcc material ms angle size 50x50x3mm as per is 1852 coating as per specification. , accessories for fitting y arm. mushroom head bolt with breakable head safety nuts. each y arm shall be supplied with two sets mush room headed bolts with security nuts and washers as per specification attached in pdf file. , anchor rod. 10 mm dia 300mm long gi rod tie with fence post at bottom using tie wire. 02 nos for each post , punched tape concertina coil including spike and handle with 56 turns and dia 610 mm having a core wire of high carbon spring steel of high tensile strength as per specificationattached in pdf file. , galvanised steel barbed wire isi marked a5 designation for galvanised steel barbed wire for fencing shall conform to is 278 1978 as per specificationattached in pdf file. , quick setting compound as per specification attached in pdf file. , aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383 of 1970 as per specification attached in pdf file. , aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383 of 1970 as per specification attached in pdf file. , ms binding wire not less than 0.9mm dia confirming to relevant is as per specification attached in pdf file. , natural sand confirming to is 383 of 1970 as per specification attached in pdf file. , portable welding machine , wire cutter 18 inch , aluminium ladder 9 steps , hand gloves leather 500 g , hand gloves canvas , hand gloves rubber , bold cutter 12 inch , y joint 10 feet long , y joint 12 feet long , hammer sledge 4lbs , steel gurmala or planer , plumbob and mason thread , cutting pliers size 8 , showel with wooden handle , hacksaw frame , wooden gurmala , ratchet spanner single socket 14 sproket , trowel masson brick carandy , water level pipe 100 m , hack saw blade double ended , measuring tape 5 mtr , measuring tape 30 mtr , axis pick with wooden handle , iron cutting machine , drill machine complete set , drill bits complete set , ratchet spanner with deep socket 12 or 13 mm , welding rods , hog ring curd less rebar tying gun machine battery operated tying wire dia meter 0.8 to 1 mm battery capacity 4400 mah alongwith tying wire suitable for machine and length of 500 mtrs , rivet gun machine , binding stick , tasla iron 18 inch , hdpe water storage tank 500 ltr , fawada with wooden handle , crow bar 5 feet long , bolt cutter 32 inch , wire cutter 150 mm , suction cum delivery pipe plastic 1 inch dia 200m long , iron cutting machine blade , alluminium straight edge 50mm sq 2 mm thick 1800mm long
Tender For vijayawada division: safety fencing/boundary wall for 130kmph using nhai anti-crash barrier/w-beam steelfencing for 98.06 km length in sse/p.way/skm & sse/p.way/ogl sections of sr.den/south/bza jurisdiction.
Tender For vijayawada division: safety fencing/boundary wall for 130kmph routes using nhai anti-crash barrier/w-beam steelfencing for 73.13 km length in sse/p.way/gdr & sse/p.way/nlr sections of sr.den/south/bza jurisdiction.