Steel Profile Tenders

Get complete information related to latest Steel Profile Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Steel Profile Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Steel Profile Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :38557579

26 Dec, 2024 NA

Balaghat - Madhya Pradesh

Tender For building material - thanapsakpadah 2 inch pins iron bars tested iron/bars (pap danta j) 8 bars iron/bars (pap danta j) 10 bars iron/bars (pap danta jhd) 12 bds lappatma cement (chbp pap 1489/1991) 50 litres, 53 liters of sand per cubic meter. sand-clean as per standard, ballast 20 mm per cubic meter, ballast 40 mm. per cubic meter, stone dust (sajvadum knej) per cubic meter, murum hard per cubic meter, pottery size of baked brick 94 inch per thousand, brick (sal. i.t.b.) size (94) inch per thousand, sal/bija frame per square feet, palla door q1. 36'x70' feet 30 mm per piece board waterproof laminated, palla door q2. 29'x70' feet 30 mm per piece board waterproof laminated, pipe 1 inch c.p.v.c., l.p 20 feet per piece a pipe 1.5 inch c.p.v.c. 20 feet per piece a pipe two inch c.p.v.c. ? 20 feet per piece a pipe three inch c.p.v.c. 20 ft per piece a plastic water tank four layer 1000 litre per piece ppa plastic water tank four layer 500 litre per piece ppa plastic water tank 6 mm (2x2 ft) per sq. ft. double charge a granite per sq. ft. tata steel profile sheet 4x10 mm 25 gauge (0.5mm), tata steel profile sheet 4x12 mm 25 gauge (0.5mm), tata steel profile sheet 4x14 mm 25 gauge (0.5mm), tmt frame and counterfeiting parts, cement frame 36'x70' per piece, iron frame 36'x70' per piece paver block per piece

CTN :38454787

18 Dec, 2024 NA

Bathinda - Punjab

Tender For corrigendum : supply of steel roofing through sheet or srt (steel profiles) as per is 1079 (q3)

CTN :38518980

31 Dec, 2024 NA

Jammu - Jammu And Kashmir

Tender For supply of work service for upvc window door shutter brick wk painting wk in vip pampose - supply and fixing of factory made upvc panels sliding door , supply and fixing of factory made upvc casement door , supply and fixing of demolition brick stone , supply and fixing of thick galvanized mild steel section , supply and fixing of weather proof silicon selant

CTN :38533309

01 Jan, 2025 NA

Kokrajhar - Assam

Tender For supply of 12 mm wall anchor fastener,20 ft mild steel l section,1point 0 lt red oxide zinc cromate primer,120 number sand paper,3 inch paint brush

Central Government/Public Sector

CTN :38522120

30 Dec, 2024 37.29 Lacs

Cachar - Assam

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079

Central Government/Public Sector

CTN :38492497

27 Dec, 2024 41.80 Lacs

Gandhinagar - Gujarat

Tender For provn of furniture for 08 offrs 56 jcos/ors md accn at mil stn dharangdhra - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07)dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mmh.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs. make-amko or equivalent, bin linen multipurpose with ironing board(fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of hardwood sheesham with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg., chair dining fd/map-ii/04 (fd/map-ii/04)dimension: overall size shall be 450mm wide x450mm deep and 950 mm height ,450mm high up to seat. description:- (a) all wood to be usd shall be 1st clas hard teak wood (b) the seat of chair shalll be made of 40 density foamcushion having thickness 75mm. the cushion shall be placed and pasted on 12mm bwr plywood as per size of seat duly covered with approved tapestry cloth of rate not less than450mm per mtr. the seat shall be be fixed over the rails and screwed from wood stopper with 30mm long screws.(c) pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. rest all specification and dimensions are as per drg. finish:- the chair shall be be polished in high gloss melamine polishin walnut shade after preparation of surfaces., hat stand with mirror large (fd-233)dimension:overall size shall be 1330 mm long, 710mm high.description:the inner frame shall be of 50mmx20mm teak wood battens six in nos .the back and front of frame shall be covered with 6mm thick commercial ply.the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive.six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5mm thick looking mirror of (saint gobian,modiguard/atul) shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand.finish: all teak wood surfaces shall be given high gloss french polish with lacquer finish. all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drgs, peg table (fd-384)dimension; overall size shall be 450mm long,300mm wide and 380mm high.description: legs shall be of teak wood of section 30mmx50mm.the legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.two bottom rails of size 20mmx40mm shall be fixed between the legs .a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.top of the table shall be of 18mm thick pre-laminated mdf board with 4mm teak wood edging all round the top of table.finish: all wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.rest all as per drg., receptacle pvc small (fd/e6/map/13)dimension/capacity:-the receptacle shall be of capacity 20 ltrsdescription:the body of receptacle pvc shall be made up of thick polymer plastic of thickness not less than 2.5mm,provided with swivel lid a

Loading, Please wait...

Steel Profile Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector