Latest steel rebar Tenders | Government steel rebar Tenders

Central Government/Public Sector

CTN :39572122

26 Mar, 2025 NA

Jaipur - Rajasthan

Tender For supply of ms sheet , ms angle - 1 inch x 1 inch , door handle , fastner - 10 x 120 , gi wire , hammer drill bit size- 6 x 75 mm , hammer drill bit size-8 x 160 mm , hammer drill bit size-10 x 160 mm , hammer drill bit size-12 x 160 mm , hammer drill bit size-14 x 160 mm , hammer drill bit size- 16 x 160 mm , hammer drill bit size-19 x 160 mm , hex head self drilling screw size-1 inch , hex head self drilling screw size-one and half inch , hex socket nut driver tool , iron cutting blade , iron grinder wheel , iron mosquito mesh size- 3 x 50 feet , iron mosquito mesh size- 4 x 50 feet , j hook , machine screw , measuring tape - 5 meter , bugle head dry wall screw , ms angle - 35 x 35 x 5 mm , ms bolt - 2 inch with nut , ms bolt - two and half inch with nut , ms flat bar - 25 mm and thick - 3 mm , angle grinder , ms wire mesh , nut bolts 6x 50 mm , polycarbonate sheet , ph2 bit set of 10 pcs , safety goggles , safety gloves , sledge hammer , spanner set 6-32 mm , screw driver bit set , sprit level magnet type , star bit 4 inch , star bit 5 inch , trush head self drilling screw screw - 1 inch , 500pcs packet , trush head self drilling screw screw - half inch , 500pcs packet , welding rod , welding rod stainless steel , welding machine two phase , welding machine holder , welding machine cable

Central Government/Public Sector

CTN :39589564

27 Mar, 2025 NA

Multi City - Multi State

Tender For supply of refrigerant recovery unit consisting of 1) gas recovery machine suitable for r - 22, r - 407c and other category iv refrigerants working in 230 v ac, 50hz, 0.75 hp motor, 1450 rpm, oil less air cooled , piston type with automatic safety shut off at 38.5 bar (min), recovery rate (liquid) not less than 1.8 kgs / min equivalent to value make model no. vrr 12 l - 1 no 2) empty cylinder 10 kg - 1 no 3) double gauge manifold - 1 no make acceptable - appion, robinair, inficon, value or similar

CTN :39562347

15 Mar, 2025 NA

Mumbai - Maharashtra

Tender For procurement of seamandship items iii - heavy duty chopper ms with wooden handl , firemans aintoe ms with wooden handle , portable fenders apple fenders , puma plate aluminium as per sam , wooden blocks 50into15into15cm , anchor buoy plastic 18 inch , creeper grapnels , chipping hammer and scrubber , life buoys , heavy duty deck washing machinealong wit , chain pulley , ear defenders , safety harness with anchor , cargo net swr 10mm 4into4mtrs lintob , cargo net swr 12mm 4into4mtrs lintob , rope nfc manila 3 stramded size 32 , rope nfc manila 3 stramded size 28 , rope nfc manila 3 stramded size 24 , splicing tool kit heavy duty , chain hook , cable tools with bag maul tommy bar bot , cable bag comprising following a topsw , hydraulic hand held pellets with wooden , emergency tool bag canvas pvc 35into13into13 , marline splike teak wood 8 inches , marline splike teak wood 22 inches , flags , crash boat bag basic first aid kit06 , flag disk white blue and red , wooden toggle 30mm dia , boat hooks large , safety helmets for boat crew size medi , white seat covers for all boats , collar repair kit for rhbs , pp rope 16 mm , pp nylon seizing rope 3mm , link 278 o.d. into 128 o.d. into 22 mm dia , ras bag , test weight 135 kgs , emergency breakaway boards for light jac , emergency breakaway boards for heavy jac , emergency breakaway boards for abeam fue , signalling wands red green and amber , deck illumination light at various locat , hull contour lights , aluminium ladder foldable large as pe , eye wash , bottom lines pp rope 16mm dia , divers lines pp rope , swivel piece bointo type , towing rope

CTN :38869209

17 Mar, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of engineering allowance items (consumable) for grse p17a project, yard nos. 3022-24 - 3/8" bsp pr. gauge_dial 100mm_1 to10 bar, 3/8" bsp pr. gauge_dial 100mm_1 to16 bar, bellow metllic - dia 125 , hose assy gasoline armoured 2" x 8.5', teflon rods_various dia(20mm,50mm,80 mm), teflon tape, thermometer (rings 5deg c- 95 deg c), plstc storge bottle_lub oil_oil sampling, plstc storge bottle_lub oil_fuel samplng, tinted glass storage bottles (1ltr)avcat, glass storage bottle for lub oil, blanks for firemain pumps 150tph, blanks_sea water cooling pump 250tph, blanks for ac sea water pumps, blanks for ac chilled water pumps, battery for torches (big), battery for torches (small), snap on for replcemnt ear plug_glass40-1, steel putiy, valvoline premium blue 7800 plus de oil, dyson v11 absolute pro w/ battery&acces., tarpaulin cover for gt,da intake&exhaust, refrigerant removal kit, 100 nb rubber bellow, 125 nb rubber bellow, strainr elemnt_200nb_90/10 cuni,mesh 6mm, strainr elemnt_150nb_90/10 cuni,mesh 6mm, strainr elemnt_100nb_90/10 cuni,mesh 6mm, strainer elemnt_80nb_90/10 cuni,mesh 6mm, strainer elemnt_50nb_90/10 cuni,mesh 6mm, strainer elemnt_40nb_90/10 cuni,mesh 6mm, strainr elemnt for 200nb_ss 316,mesh 100, strainer elemnt for 100nb_monel,mesh 100, strainer elemnt for 80nb_ss 316,mesh 200, strainer element for 32nb_monel,mesh 200, strainer element for 65nb_monel,mesh 200, strainer element for 50nb_monel,mesh 100, strainer element for 65nb_monel,mesh 100, strainer element for 50 nb y-type_monel, strainer element for 65nb_monel,mesh 100, 200 nb rubber bellow, 65 nb corrugated pvc green hose, 10 nb rubber hose, jubilee clips of size 150mm., jubilee clips of size 200mm., metallic bellow, 65 dia, 400mm, metallic bellow, 32 dia, 350mm, metallic bellow, 40 dia, 350mm, strainr elemnt for 150nb_ss 316,mesh 200, bellow metllic - dia 40 , emergency floodlight (led) with battery, inspection camera dewalt, fabric bag 1st intervention facom, steel toe safety shoe (size 7-15 pairs), steel toe safety shoe(size 8-35 pairs), steel toe safety shoe(size 9-35 pairs), steel toe safety shoe(size 10-35 pairs), steel toe safety shoe(size 6 -5 pairs), steel toe safety shoe(size 12-5 pairs), cobalt steel bimetal saw blades, loctite 596 gasket maker, bosny lacquer spray, drill bits carbide tip 3 mm to 20 mm, drill bits tungsten tip 3 mm to 20 mm, st of scrw driver_philips tip consistng:, stanley cushion grip scrw drivr st 16pcs, socket set, 1/21n square drive, kj dual input thermometer extech, non contact thermometer range-32t0760deg, 3/8" bsp pr. gauge_dial 100mm_1 to10 bar, 3/8" bsp pr. gauge_dial 100mm_1 to16 bar, bellow metllic - dia 125 , hose assy gasoline armoured 2" x 8.5', teflon rods_various dia(20mm,50mm,80 mm), teflon tape, thermometer (rings 5deg c- 95 deg c), plstc storge bottle_lub oil_oil sampling, plstc storge bottle_lub oil_fuel samplng, tinted glass storage bottles (1ltr)avcat, glass storage bottle for lub oil, blanks for firemain pumps 150tph, blanks_sea water cooling pump 250tph, blanks for ac sea water pumps, blanks for ac chilled water pumps, battery for torches (big), battery for torches (small), snap on for replcemnt ear plug_glass40-1, steel putiy, valvoline premium blue 7800 plus de oil, dyson v11 absolute pro w/ battery&acces., tarpaulin cover for gt,da intake&exhaust, refrigerant removal kit, 100 nb rubber bellow, 125 nb rubber bellow, strainr elemnt_200nb_90/10 cuni,mesh 6mm, strainr elemnt_150nb_90/10 cuni,mesh 6mm, strainr elemnt_100nb_90/10 cuni,mesh 6mm, strainer elemnt_80nb_90/10 cuni,mesh 6mm, strainer elemnt_50nb_90/10 cuni,mesh 6mm, strainer elemnt_40nb_90/10 cuni,mesh 6mm, strainr elemnt for 200nb_ss 316,mesh 100, strainer elemnt for 100nb_monel,mesh 100, strainer elemnt for 80nb_ss 316,mesh 200, strainer element for 32nb_monel,mesh 200, strainer element for 65nb_monel,mesh 200, strainer element for 50nb_monel,mesh 100, strainer element for 65nb_monel,mesh 100, strainer element f

CTN :39562375

15 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of general service life jacket , hdlj , super line stopper with thimble incorpor , cordage stopper with thimble mmfc si , cordage stopper with thimble nfc siz , tommy bar size 24mm dia length 1 5 , karabiner hook size large , life raft securing strap size as per s , anti glare goggles for various evolutio , gratings for all bollards on upper deck , leather gloves for swr size as per sam , safety goggles size as per sample , rubber gloves size as per sample , loud hailer 25w , signalling bats hardwood size 250mm , marshalling traffic electric safety wand , hatchet size 12 inches 6oogm length , man overboard dummy plastic size as , sea boat bag with all contents sea an , first aid kit with stowage , paddles buoyant , hydraulic steel wire cutter , portable search light , eye plate size 25mm dia , snatch block with straigth shackle d , light jackstay rope with round thimble , block traveller with spring hook siz , ring connecting round size 75 id into 19 , s w r sling 6 into 12 4 leg size 8 mm d , f s wire rope strops size 8 mm dia , thimble size 16 mm dia , thimble size 32mm dia , rescue strop for passenger transfer , steadying line with carbine hook size , distance line along with flags size 12 , shackle for leading blocks of in outhau , test weight strop swl 3 t size 12 mm , electric hot gun size heavy duty , paint miinto er grinder heavy duty , nylon rope min breaking strength 2 95 t , shackle bow 1 25 t size 16 mm dia bolt , open thimble size 16 mm , shackle straight screw size 19 mm , larne target chafe piece with swl 8 9t

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

CTN :39566455

18 Mar, 2025 NA

Nagpur - Maharashtra

Tender For quotation enquiry for the work of new electrification works in building materials testing lab civil engg department at vnit campus nagpur - new electrification works in building materials & testing lab, civil engg. department at v.n.i.t. campus, nagpur., providing & erecting 4 pole mccb, 415v, up to 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/trip alarm contact. mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-mccb, supplying and erecting ss enclosure of 1.6mm thick with detachable gland plate suitable for upto 100a mccb., supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four copper bars, 500v, 100a having 10mm ( width) x 1.6 mm (thickness), with 99.9 % copper purity as per e91e grade & current density 1.6 a per sq mm compliance to is 5082 and enclosure fabricated with 16 swg crca sheet and epoxy paint, with suitable number of ways and with smc/dmc insulators and accessories of suitable rating and two nos of separate earthing terminals complete as per specification no. cp-bb, supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four copper bars, 500v 200a having 20mm ( width) x 2 mm (thickness), with 99.9 % copper purity as per e91e grade & current density 1.6 a per sq mm compliance to is 5082 and enclosure fabricated with 16 swg crca sheet and epoxy paint, with suitable number of ways and with smc/dmc insulators and accessories of suitable rating complete as per specification no. cpbb, supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable, 1100 v 4 core 35 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb-lt/al, supplying, erecting & marking fp mcb 63a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-mcb, supplying & erecting crca sheet metal one way enclosures of 1.2mm thickness suitable for dp mcb/tp mcb/fp mcb/rccb/rcbo complete erected on provided angle iron/gi frame., supplying & erecting mains with 4x16 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. wg-ma/bw, supplying and erecting exhaust fan heavy duty 230 v a.c. 50 cycles 375/380 mm. 1400 rpm complete erected in position as per specification no. fgfn/exf, supplying & erecting of 20w led tubelight combined fitting with 01 year warranty, point wiring for light/bell/exhaust fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthing and required accessories as per specification no. wg-pw/sw, supplying and erecting modular type switch 16a on provided plate and box with wiring connections complete., supplying and erecting modular type 3 pin 6/16a multi socket with safety shutter on provided plate and box with wiring connections complete., supplying and erecting 16a, 10ka, spmcb suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected., supplying and erecting modular type blanking plate one module, on provided plate & box., supplying and erecting pvc surface modular switch box with double mounting & front plate for 8 module complete duly connected., supplying and erecting pvc trunking (pvc casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification no. wg-ma/con., supplying and erecting pvc trunking (pvc casing-n-capping) of size 32mm with accessories on wall/ceiling as per specification no. wg-ma/con., supplying pedestal type air circulator 600

State Government

CTN :39542361

13 Mar, 2025 NA

Delhi - Delhi

Tender For providing of facility management services - providing/ fixing of mechanical structure for safety of tube well panel installed at mohalla clinic tube well and jyoti ba phoole park tube well under ac-56. , fabrication/fixing of m.s jaal room to cover the tube well panel and prevent from theft with the help of 50x50x50 mm angle and 12mm2 bar welded at suitable distance center to center with locking arrangement including cutting welding grinding and finishing painting with anticorrosive primer on complete jaal and painting with black paint, grouting the same with civil work complete in all respect with transportation loading unloading at site with the help of tools, tackles with heavy/manual labour, sizes of jaal 1.48x 1.32x1.80mtr , with the help of 25x25x5 mm angle and 16 gauge wire mash with locking arrangement and 140 mm ms strip for support including cutting welding grinding and finishing painting with anticorrosive primer on complete jaal and painting with black paint, grouting the same with civil work complete in all respect with transportation loading unloading at site with the help of tools, tackles with heavy/manual labour sizes of jaal-6x6x6 ft

State Government

CTN :39544814

15 Mar, 2025 6.00 Lacs

Kolkata - West Bengal

Tender For supply of pneumatic parts for the hydraulic and pneumatic lab of imu kolkata campus - pneumatic valve :- stroke 1", load capacity 200n , pneumatic rotary actuator stroke length upto 40mm , unloader reciprocating air compressor spare safety valve, relief valve temperature (-200-500deg c), pressure 100 bar, flow rate 1000kg/hr , oil separator material -ss. application-air. used for compressor /reefer compressor pressure upto 30bar , frc unit pressure 10bar, port size g inch, flow direction left to right , frl unit port size inch, flow rate 2800ltrs/min, pressure 10 bar

Central Government/Public Sector

CTN :39533892

10 Mar, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of single stage co2 regulator confirming to is:6901:2009, class :. inlet pressure-200 bar, flow 35 lpm. pressure gauge complies with iso 5171 with device is in-built safety blow-off for excess pressure r elease. inlet pressure gauge range 0-400 bar & outlet flow meter range 0-50 lpm. inlet connection 0.860 x14 whit rh f & outlet connection 3/8 inch bsp rh m. external self resealing relief valve. die forged brass body. make- esab or ador or messer or equivalent from oem or oem authorized dealer only. oem/authorizat ion certificate. [ warranty period: 30 months after the date of delivery ]

Steel Rebar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

State Government

Central Government/Public Sector