Latest steel rod Tenders | Government steel rod Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38568790

23 Dec, 2024 NA

Ghaziabad - Uttar Pradesh

Tender For supply of 25 kv earthing/discharge rod with working voltage 25 kv ac traction to rdso s pecification no.eti/ohe/51(9/87) with latest a and c slip no.-1(10/92) each discharge rod is to be supplied with 02 nos.rail clamps,the top clamps suitable for 10,12 mm dia.coductor 01 no. each and cable 7.5,1.5 mtr (i.e,total 9 mtr)whole assembly to be supplied in a canvas bag. [ w arranty period: 30 months after the date of delivery ]

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

Central Government/Public Sector

CTN :38604834

23 Dec, 2024 NA

Nagpur - Maharashtra

Tender For supply of stainless steel rods in running feet with clamp, knobs, rings along with fitting at site for 15 amrit bharat stations. [ warranty period: 12 months after the date of delivery ]

State Government

CTN :37879327

23 Dec, 2024 NA

Rajkot - Gujarat

Tender For corrigendum : purchase of (1) various type of earthing rod (2) do operating rod

Private Sector

CTN :38532397

21 Dec, 2024 NA

Jhajjar - Haryana

Tender For supply of stainless steel rods ss - m0171110805 - rod-ss round aisi 304 - 20mm , m0171111002 - rod-ss round aisi 304 - 25mm , m0171111206 - rod-ss round aisi 304 - 30mm , m0171111604 - rod-ss round aisi 304 - 40mm , m0171112005 - rod-ss round aisi 304 - 50mm , m0171112403 - rod-ss round aisi 304 - 60mm , m0171112801 - rod-ss round aisi 304 - 70mm , m0171113202 - rod-ss round aisi 304 - 80mm , m0171114001 - rod-ss round aisi 304 - 100mm , m0171130803 - rod-ss circuler aisi 316 - 20mm , m0171131000 - rod-ss circuler aisi 316 - 25mm , m0171131204 - rod-ss circuler aisi 316 - 30mm , m0171131602 - rod-ss circuler aisi 316 - 40mm , m0171132003 - rod-ss circuler aisi 316 - 50mm , m0171132401 - rod-ss circuler aisi 316 - 60mm , m0171132809 - rod-ss circuler aisi 316 - 70mm , m0171133200 - rod-ss circuler aisi 316 - 80mm , m0171133608 - rod-ss circuler aisi 316 - 90mm , m0171134009 - rod-ss circuler aisi 316 - 100mm

Central Government/Public Sector

CTN :38570752

26 Dec, 2024 4.04 Lacs

Mangalore - Karnataka

Tender For providing surge/earthing protection system to chairman bungalow - providing external lightning protection(elp) - supply & installations with:a) 800mm-8mmair termination spike with accessories.b) parallel connector stst (v4a) for rod 7-10mm.c) 8mm round conductor big holder at metal sheet roof, 3mtr,16mm/10mm almgsi air termination rod with accessories-supply & installations with:a) 1mtr,10mmair termination rodb) rod clamp for connecting air termination rods(stst for rod 8-10/rd16mm fsk8.1016skm10x25-v2a)c) 2mtr,16mm almgsi chamfered on both ends air termination rodd) concrete337 circular base 17kg(for air termination rods d-10mm/16mm)e) plastic flat washer d-370mm black for concrete bases-17kgf) connecting clamp for air terminal to roof conductor, 8mm aluminium-magnesium alloy round conductor-rd8/almgsi-with ss holder-supply& installations:a) 8mm aluminium-magnesium alloy round conductor-rd8/almgsi, supply & installation:-8mm round conductor ss holder, supply & installation -8mmround conductor holder for wall& parapet stst with cover plate, supply & installation 8mm round conductor holder-fate roof tile, supply & installation 8mm round conductor holder-tile ridge, supply & installation of connecting sleeve (zdc for rd 8mm with 4 screws m6x10mm), supply & installation of universal cross connector stst, supply & installation of test clamp-round conductor to strip connection, supply & installation of stainless steel 10mm earth conductor, supply & installation of universal cross connector stst, supply & installation of 3mtr,17.2mm copper bonded (ul listed) earth rod with backfill material & accessoriesa)copper bonded (ul listed) earth rod 17.2mm dis, 3000mmlong, 250 micron - 1rodb) terra 20kg fulgurites free backfill material-1bagc) stainless steel earth rod connecting clamp-ss316-1clampd) rcc earth pit chamber 340mmx340mm (frame & cover)-1no, supply & installation of surge protection device(spd)reputed makea) vap dva csp3p100fm combined lightning current &surge arrestor type 1+ type 2 (3ph+n circuit)-installation place: main eb incoming).b) ngate-dga gfftv-combined arrestor: installation place-cable/sattv

CTN :38329012

18 Dec, 2024 NA

East Sikkim - Sikkim

Tender For bid to ras tender for supply of shovel round nose with handle 2.3 kgs excluding handle weight , spade with handle 1.8 kgs excluding handle weight , crowbar tempered 1650 mm long with across , wheel barrow steel double wheel , wheel barrow steel single wheel , measuring tape metalic 5 mtr long , measuring tape metalic 15 mtr long , axes felling 2kg with handle , hack saw frame fixed with blade size 12 inch , duoble faced sledge hammer fully hardened and tempered 1 kg weight , duoble faced sledge hammer fully hardened and tempered 2 kg weight , duoble faced sledge hammer fully hardened and tempered 3 kg weight , duoble faced sledge hammer fully hardened and tempered 3.5 kg weight , duoble faced sledge hammer fully hardened and tempered 5 kg weight , spirit level 12 inch steel body , spirit level 24 inch steel body , electric line tester , soldering wire , gloves for insulation electrician , flat chisel 0.5 inch , flat chisel 2 inch , round chisel 0.5 inch , round chisel 1.5 inch , half round chisel 0.5 inch , half round chisel 1.5 inch , mortise chisel 0.5 inch , mortise chisel 0.75 inch , carpenter try square 8 inch , carpenter try square 15 inch , file triangular 6 inch , plum bob 8 ozs , mason trowel 4 inch steel with handle , pan mortar standard , hack saw blade size 12 inch , multimeter digital standard , mason square 24 inch x 12 inch , racker 12 prong ms 12 inch long with wooden handle , soldering iron , earth rammer with handle , bitumen pouring cane 10 ltr cap , cube mould , tile cutting machine , ring spanner set of 12 pcs (6x7 to 30x32) , de spanner set of 12 pcs (6x7 to 30x32) , hammers ball pin , cutting pliers , adjustable spanner , empty tool box , nose plier , flat plier , screw driver , mini hacksaw , mini hammer 200 gm , soldering paste , hacksaw 18 inch , claw hammer 200 gms , mason hammer , flat file , half round file , round file , wood drill machine , wood drill bit set , heavy duty drill machine for concrete , heavy duty drill machine bit set , jack planner 12 inch , jack planner 18 inch , jack planner 24 inch , smooth wood planner 6 inch , t bar clamp 6 inch , electric wood planer , hand drill machine with bit , carpenter stone , wood cutter machine with blade , electric grinder , exhaust fan 12 inch , cgi sheet 10 feet x 3 feet , aerial route recee equipment , almirah steel large 78 inch x 36 inch x 19 inch , almirah steel small 50 inch x 30 inch x 18 inch , mattress 6 feet 6 inch x 3 feet 6 inch , revolving office chair , office table , charpoy bed with ply top 6 feet 6 inch x 3 feet 6 inch , hume pipe 1200 mm dia x 2.5 mtr long of np3 standard , water geyser 15 ltrs cap , cgi sheet 10 feet x 4 feet (pre painted) , j hook with nut and bitumen washer , pbs roll (tar felt) having 3 feet width and 20 mtrs length in each roll , linoleum sheet , curtain 7 feet long , door mat , steel rod for curtains , ceiling light white , ceiling light yellow , heavy duty plastic wheeled dust bin 60 ltrs cap , steel hot case , lpg stove double burner , kerosene bhatti with electric motor , kerosene stove burner (4 no) , iron tawa big size for ors mess , degchi/patila 24 inch with lid , degchi/patila 22 inch with lid , degchi/patila 20 inch with lid , degchi/patila 18 inch with lid , degchi/patila 16 inch with lid , degchi/patila 12 inch with lid , rubber pipe/flexible pipe 1inch dia for water supply , rubber pipe/flexible pipe 1.5 inch dia for water supply , parat aluminium 24 inch , steel plate , steel glass , katori bowl , tea spoon , service spoon small for cooking , service spoon medium for cooking , service spoon large for cooking , iron palta , kadai iron 30 inch , kadai iron 24 inch , kadai iron 18 inch , kadai iron 15 inch , pressure cooker 20 ltr , pressure cooker 10 ltr , pressure cooker 5 ltr , pressure cooker 3 ltr , steel bucket , steel jug , gas stove with regulator , pipe and lighter , gas bhatti , idli maker , mixer grinder heavy duty , dinner set (bone china) , dosa tawa , frystrainer small , frystrainer l

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

CTN :38133741

26 Dec, 2024 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of steel round blanks - h-12 , esr steel round blanks as per annexure enclosed, size od 460mm , length 190mm , h-12 , esr steel round blanks as per annexure enclosed, size od 415mm , length 190mm , h-12 , esr steel round blanks as per annexure enclosed, size od 170 mm , 40 mm long , h-12 , esr steel round blanks as per annexure enclosed, size od 145 mm , 40 mm length , h-12 , esr steel round blanks as per annexure enclosed, size od 135mm , length 1400mm , h12 , esr steel round blanks as per annexure enclosed, size od 150 mm , 1300 mm length , h-12 , esr steel round blanks as per annexure enclosed, size od 155 mm , 1300 mm length , h-12 ,esr steel round blanks as per annexure enclosed, size, od 115 mm , 1300 mm length , h-12 , esr steel round blanks as, per annexure enclosed., size, od 75mm , length 900mm , h-12 , esr steel rods as, per annexure enclosed., size od 60mm , length 900mm , h-12 , esr steel rods as, per annexure enclosed., size od 55mm , length 900mm , h-12 , esr steel round blanks as per annexure enclosed, size od 100 mm , 170 mm length , h12 , esr steel round blanks as per annexure enclosed, size od 145 mm , 220 mm length , h-12 , esr steel round blanks as per annexure enclosed, size od 175 mm , 260 mm length , h-12 , esr steel round blanks as, per annexure enclosed., size od 200mm , length 150mm , h-12 , esr steel round blanks as, per annexure enclosed., size od 340mm , length 150mm. , h-12 , esr steel round blanks as, per annexure enclosed., size od 265mm , length 150mm , h-12 ,esr steel round blanks as per annexure enclosed, size od 360 mm , 150 mm length

Steel Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Private Sector

Central Government/Public Sector