Latest steel structural Tenders | Government steel structural Tenders

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

State Government

CTN :39605466

07 Mar, 2025 27.54 Lacs

Siwan - Bihar

Tender For forest clearing, embankment repair and structure work at various places between km 0.00 to 1.21, km 1.21 to 1.34, km 3.65 to 4.84, km 4.87 to 6.09, km 6.09 to 9.14, km 9.14 to 10.67, km 10.67 to 12.195, km 12.195 to 13.41, km 15.85 to 19.05 of main western canal under main western canal division,valmikinagar

State Government

CTN :39603178

12 Mar, 2025 NA

Nashik - Maharashtra

Tender For design, manufacturing, supply, erection & installation with test & trial of hydraulic hoisting arrangement tal. lifting & lowering capacity 85 ton, stroke 2250 mm, opening speed = 0.5m/min. & closing speed 1.44 mtr/min. (gate closing in 90 seconds) with cushioning effect at the end of stroke. quick closing gate hydraulic hoist shall have following specifications:-1. cylinder mounting inside intake well above the gate top & control panel power pack mounting at the top of the well. 2.hydraulic cylinder mounted on m.s. supporting structure inside intake well shall be capable to work under water head of 50m. max. 3. hydraulic cylinder operated from power pack located at well top via s.s. piping for deharji medium project @ tal. vikramgad, dist.:- palghar, maharashtra state

corporations/Associations/Others

CTN :39587218

27 Mar, 2025 7.48 Lacs

Amreli - Gujarat

Tender For work of 1) erection, commissioning of equipments, control wiring etc. of 220/66kv 160 mva transformer no.-2 bay for ehv class substation augmentation and 132kv busbar protection panel commissioning at 220kv vallabhipur ss 2)11 kv capacitor bank shifting & power cable shifting at 66kv bunder road ss and 66 kv sardarnagar ss 3) erection of new h-frame dp structure between loc. no. 35(t) to 36(t) for height raising of 66kv vartej-navagam line 4) erection of new h-frame dp structure between loc. no. 80(s) to 81(s) for height raising of 66kv mamsa-bhadi line under tr. division vartej of tr. circle amreli, getco

corporations/Associations/Others

CTN :39588444

05 Apr, 2025 94.40 Lacs

Mehsana - Gujarat

Tender For bi-arc for emergency restoration work of 66kv/132kv/220kv transmission line on tower/h-frame structure with acsr dog/panther/zebra/equivalent al-59 conductor under mehsana circle

State Government

CTN :39604849

29 Mar, 2025 20.60 Crore

Kutch - Gujarat

Tender For construction work of new cross drainage, repairing of cross drainage, structure & bridge repair work & other miscellaneous work on various roads as & when required or in emergency under kachchh (r & b) division.

Central Government/Public Sector

CTN :39601503

10 Mar, 2025 NA

Bhusawal - Maharashtra

Tender For hiring of additional welders & helpers by bhel to expedite the structure welding work progress in boiler & scr structure/ducting at 1x660mw, u#6, mahagenco bhusawal-reg:

Central Government/Public Sector

CTN :39601534

10 Mar, 2025 NA

Bhusawal - Maharashtra

Tender For hiring of 50 nos of manpower by bhel to expedite the balance work in scr structure at 1x660mw, u#6, mahagenco bhusawal

Trust

CTN :39589635

13 Mar, 2025 NA

Gandhinagar - Gujarat

Tender For selection of agency on turnkey basis for conceptualizing, designing, execution of temporary structure and related infrastructure and electrification work for utarvaini panchkoshi narmada parikarma 2025

CTN :39357296

11 Mar, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : construction of structure - profile sheet size 10x16 , profile sheet size 16 x 15 , base size 16 x 15 base height 1 feet , base size 16 x 10 , three side wall size 6 x 16 two side wall 10x6 with material and labour charge , plumber work with material and labour charge

Steel Structural Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors