Latest steering gear Tenders | Government steering gear Tenders

Central Government/Public Sector

CTN :44931970

13 May, 2026 NA

Ajmer - Rajasthan

Tender For design, manufacture, supply, installation, testing and commissioning of microprocessor based electronic interlocking system (rdso spec no. rdso/spn/192/2019 ver. 2 with latest amendment) at budha pushkar (alteration, indoor & outdoor work), pushkar, nand, kod, riyan, bhesra kalan, katyasani stations along with supply, installation, testing and commissioning of various indoor & outdoor signalling & telecom systems/gears.the work includes excavation of trench, laying of cables in polyolefin duct/rcc half round pipes/gi pipe/dwc/hdpe/trench etc., casting of foundations of macls signals/apparatus cases, supply-installation of point machines, apparatus cases, macls signals, track circuit equipment (dc track circuit & single msdac in all stations yards), earthing, data loggers, eld, facs, afdas, iot based rdpms etc.the work includes addition/alteration in the existing electronic interlocking (kyosan make ei) at budha pushkar station & associated indoor and outdoor works in c/w new bg line in pushkar - merta section.the work also includes signalling and telecom work for shifting of existing s&t gears (lc gates, signals and location boxes, s&t cables, hassdac/ssdac, etc.) for removal of infringements of s&t gears coming in alignment of new bg line.the telecom work includes design, supply, installation, configuration, testing and commissioning (sitc) of telecom indoor and outdoor equipment including ip-mpls system with power supply arrangement, trenching, laying, jointing and termination of 4*48 fibre optical fiber cable (two on each side of the track) cable along with fibre management system & telecom asset management system and 6 quad cable along with provision of passenger amenities including ipis at pushkar & katyasani and other telecom works at stations, block sections, tss/sp/ssp etc. in c/w new bg line work in pushkar - merta section of ajmer division of north western railway.

Central Government/Public Sector

CTN :44931971

13 May, 2026 NA

Sonpur - Bihar

Tender For rehabilitation and reliability improvement of various s&t gears in block sections of hjp-spj section over see division.

Central Government And Public Sector

CTN :44933479

21 May, 2026 NA

Bangalore - Karnataka

Tender For right angled foot mounted iec geared motor-29 rpm motor specification: 1. rated voltage in (v) - 415+/-6% 2. no. of phases- 3 3. no. of poles- 4 4. minimum rated output- 1.5kw/2hp 5. efficiency class- ie3 6. type of duty- s1 7. insulation class- f 8. degree of protection for motor enclosure-ip55 9. designation of construction and mounting arrangements- b5(flange) 10. frame- 90l 11. service factor- not less than 1.5 12. the motor parameters should be conforming to is325-1996 or latest 13.preferred makes- abb, crompton greaves, bharat bijlee, kirloskar, lhp, siemens, hindustan. gear boxspecification: 1. output speed- 29+/-5% 2. output shaft dia- 45mm +/- 1mm 3. the gear box should have a built in provision to change from right hand drive to left hand drive 4. the gearbox mounting should be suitable for fixing on the top plate as per drawing rwf no.712065810340 5. additional base plate, if required, to be fitted with the unit to match the drawing rwf no.712065810340. the base plate shall be fitted to the gear box with the countersunk screw. 6. the thickness of the base plate should be minimum 25mm 7. preferred makes- power build, shanthi gears, nord, sew, pg drive, progearsive, lloyd, perfect gears, worm gear india, varvel, jk fenner, bonflglioli, transtech gears, radicon . 8. the gearbox should be suitable to the motors specified as above. specific requirements: 1. total length of the unit (motor plus gear box) should not be more than 750mm 2. the bidder should submit the gad, catalogue and detailed specification of the motor and gear box 3. only original equipment manufacturers or their authorized dealers to quote 4. warranty- 18 months from the date of supply or 12 months from the date of commissioning, whichever is earlier [ warranty period: 18 months after the date of delivery ]

Central Government And Public Sector

CTN :44933488

24 Apr, 2026 NA

Bangalore - Karnataka

Tender For input pinion shaft for auxiliary hoist of 35/10t eot crane no. 2 to rwf drawing no. 721014410290. note: 1) the item should be manufactured from forged material only. 2) the supply shall accompany the mtc with, i) the traceability of forging details such as heat number, lot number, etc ii) chemical composition, hardness, etc 3) the shaft should be ut tested for defects and ut certificate from the nabl accredited labs should accompany the supply. 4) those firms who have supplied gears of diameter 100mm and above (at least one such supply in the last three years) to any firm shall only quote. 5) proof of supply shall accompany the offer. 6) offers not meeting the above requirements shall summarily be rejected. [ warranty period: 12 months after the date of delivery ]

Central Government And Public Sector

CTN :44933495

24 Apr, 2026 NA

Bangalore - Karnataka

Tender For input pinion shaft for auxiliary hoist of 40/12.5t eot crane no. 1 to rwf drawingno. 721014412680. note: 1) those firms who have supplied gears of diameter 100mm and above(at least one such supply in the last three years) to any firm shall only quote. proof of thesame shall accompany the offer. 2) the item should be manufactured from forged material only. 3) mtc shall be accompanied with the supply with i) the traceability of forging details of heat number, lot number, etc. ii)) chemical composition, hardness, etc 4) the shaft should be ut tested for defects and ut certificate from the nabl accredited labs should accompany the supply. 5) offers not meeting the above requirements shall summarily be rejected. [ warranty period: 12 months after the date of delivery ]

Central Government And Public Sector

CTN :44933880

25 May, 2026 NA

Bangalore - Karnataka

Tender For right angled foot mounted iec geared motor-72rpm motor specification: 1. rated voltage in (v) - 415+/-6% 2. no. of phases- 3 3. no. of poles- 4 4. minimum rated output- 2.2kw/3hp 5. efficiency class- ie3 6. type of duty- s1 7. insulation class- f 8. degree of protection for motor enclosure-ip55 9. designation of construction and mounting arrangements- b5(flange) 10. frame- 100l 11. service factor- not less than 1.5 12. the motor parameters should be conforming to is325-1996 or latest 13. preferred makes- abb, crompton greaves, bharat bijlee, kirloskar, lhp, siemens, hindustan. gear box specification: 1.output speed- 72+/-5% 2.output shaft dia- 45mm +/- 1mm 3.the gear box should have a built in provision to change from right hand drive to left hand drive 4.the gearbox mounting should be suitable for fixing on the top plate as per drawing rwf no.712065810340 5. additional base plate, if required, to be fitted with the unit to match the drawing rwf no.712065810340. the base plate shall be fitted to the gear box with the countersunk screw. 6.the thickness of the base plate should be minimum 25mm 7. preferred makes- power build, shanthi gears, nord, sew, pg drive, progearsive, lloyd, perfect gears, worm gear india, varvel, jk fenner, bonflglioli, transtech gears, radicon . 8.the gearbox should be suitable to the motors specified as above. specific requirements: 1. total length of the unit (motor plus gear box) should not be more than 750mm 2. the bidder should submit the gad, catalogue and detailed specification of the motor and gear box 3. only original equipment manufacturers or their authorized dealers to quote 4. warranty- 18 months from the date of supply or 12 months from the date of commissioning, whichever is earlier. [ warranty period: 18 months after the date of delivery ]

CTN :44775568

22 Apr, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of plant and misc stores d d - hydraulic hose , grease gun , hydraulic pump , gear couplings , element filter compressor , hose assembly , filter cartridge , angle air filter , endless v belt , ms pinion gears , cylinderical roller bearings , ball bearing , cold start pilot kit , hydraulic flat face quick couplings , shaft , stud with nuts type b , oil filter cartridges , air pre filter , air nozzle , oil cooler , hexagonal head bolt , bush bearing , lock washer , oil filter assembly , piston ring set , fuel water separator , shielding gasket , piston pin , universal cross assembly , dry cylinder liner , rotary switch , angle seat valve , universal joint cross assembly , piston pin , carbon bush , hose assembly , hydraulic flat face quick couplings , transition joint cable joint kit , hydraulic cylinder , straight joint cable joint kit , groove ball bearing , armature , hydraulic flat face couplings , axial piston pump , hose connector

Central Government/Public Sector

CTN :44567416

23 Apr, 2026 22.00 Lacs

Nancowrie - Andaman And Nicobar Islands

Tender For corrigendum : repair/ replacement/ maint of unsv lt switch gears, ug cables, repair/ renewal of spares and servicing of standby dg sets and other connected miscellaneous e/m works at various locations of ins baaz, army land, cgdhq-10 and 3u det under ge campbell bay

Central Government/Public Sector

CTN :44663397

25 Apr, 2026 49.00 Lacs

Panitola - Assam

Tender For corrigendum : repair/replacement of lt ug cable, lt switch gears, panel acsr conductors electric poles and allied works at zone i and ii under ge dinjan

State Government

CTN :44931573

23 Apr, 2026 NA

Mahabubnagar - Telangana

Tender For erection of addi distribution transformers with necessary switch gears in place of overloaded distribution transformers at various locations in operation section kosgi of operation sub-division kosgi of operation division narayanpet under improvement to original works

Steering Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors