Latest stiffner Tenders | Government stiffner Tenders

CTN :39774927

10 Apr, 2025 NA

Sonitpur - Assam

Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold or ambuja or ultratech or acc or jkj dalmia , stone boulder 9inch to 12inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded . , coarse aggregate 40mm graded , water proofing compund conforming to is 2645 2003 make pidilite or dr fixit or fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , cement based paint snowcem make berger or asian or nerolac , synthetic paint enamelled og conforming to is 5 ur 2004 make asian or berqer or nerolac , synthetic paint enamelled brown confirming to is 5 2004 make berger or asian or nerolac , anti corrosive red oxide zinc chromate primer conforming to is 5 2004 make asian or berger or nerolac , loop holes 1000 x 300 mm make tata or sail or jsw , ventilator steel 300 x 450 mm will be fabricated using isa 35 x 35 x 5mm for outer frame and isa 30 x 30x 3mm for shutter frame with blace sheet as per ts , ms binding wire , ismb hot rolled ms 125 4000 mm long make tata or sail or jsw , isms hot rolled ms 125 1200 mm long make tata or sail or jsw , srt 1840 x 613x 180 mm 2 mm thick ms sheet hot rolled steel with nuts bolt incl one coat of red oxide make tata or sail or jsw , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm and door shutter frame of isa 35x35x5mm and all stiffner as per ts , hdpe sand bags khaki colour of size 30 inchx15inch inside laminated interlocking stiched weight of the each bag should not be less then 42 45 gms per bag , mild steel bar of size 6 to 8 mm dia conforming to is 432 part ll 1982 make tata or sail or jsw , prefeb folding double sleeping bunks madeof ms columns 65x 65x6mm and ms plate form made of isa 40x40x6mm hold fast 65x65x6mm 230mm long 12mm as per ts , polythene sheet colour less and weight of sheet shall be not less than 70gm or sqm , wooden planks for shuttering llnd class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various sizes , nails various size , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12mm dia and 300mm long , gi pipe 20 mm dia light grade make jindal or tata or kalinga , gi pipe 40 mm dia light grade make jindal or tata or kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto or polycab or finolex , testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe make jindal or tata or kalinga , galvanised iron strip 32x6mm

Central Government/Public Sector

CTN :39809665

14 Apr, 2025 NA

Nashik - Maharashtra

Tender For supply of osaero job work for manufacturing of 238 parts as a package ref semfg573 - channel(sta#1c-#1d) , doubler-lh(sta#1b-1c) , doubler-rh(sta#1b-1c) , zee member-lh , zee member-rh , strip - lh , strip - rh , frame-lh side(sta#1d) , frame -lh (sta#1c) , frame -lh (sta#1b) , frame -rh (sta#1b) , frame -rh (sta#1c) , frame-rh side(sta#1d) , stiffener-unfeathering pump , floor stiffener-aft(oil , accumulator , lh channel (sta#5-#6) , lh channel (sta #5 - #6) , lh doubler (sta #5 - #6) , lh channel (sta #11- #12) , lh channel(sta #11-#12) , lh stiffener-top(sta#8-#10) , lh channel(sta#10-sta#11) , partition floor(baggage , compartment , stringer top-rh(sta#4-#5) , stringer top-rh(sta#5-#6) , stringer top-rh(sta#6a-#8) , stiffner , stiffner , aux.frame(bottom)sta#16 , doubler-lh(longeron)(#18-#19) , doubler-rh(longeron)(#18-#19) , stringer (sta#17-sta#18) , stringer(sta#6-#7) , rh stringer(sta#2-#3) , bottom skin-lh(sta#14-sta#19) , doubler(sta#5-sta#6) , doubler(sta#1-#1a)-lh-ecs cover , doubler(sta#1-#1a)-rh-ecs cover , doubler-top-rh(sta#1-#1a) , shear wall aft-lh , lh-bottom frame(sta#6) , splice strap(sta#7)-lh , shear wall aft-rh , bottom frame(sta#6)-rh , stringer , lh sealing member , support bracket - (sta#1-#2)-lh , support bracket-sta#1-#2)-rh , channel(uplock bracket)-lh , channel(uplock bracket)-rh , zee stiffener(sta#4) , stiffner(sta#1-#2) , stiffener-rh(sta#12) , rh stiffener(sta#11) , lh stiffener(sta#12) , lh crimped doubler(#9-#10) , stiffner- lh (x=2349) , stiffner -rh (x=2603) , stifffner- lh (sta#12) , stiffner-lh(sta#11) , stiffner-rh(sta#x=2123.5) , stiffner-rh(x=2349) , channel-bottom floor , channel-bottom floor , stiffener bottom floor (sta#17) , channel-bottom floor , channel-bottom floor , lh crimped doubler(#9-#10) , stiffner (sta #4-#5) , lh floor sheet(sta #9-#10) , channel bot.-lh (sta #1-#2) , b channel bot.-lh (sta #1-#2) , b channel bot.-rh (sta #1-#2) , lateral channel (sta #1-#2) , channel bot.-rh (sta #1-#2) , cover plate (sta.#8 to #9) , battery shield sheet(sta#2) , channel top (sta#1a-#1) , cover , top frame(sta#10,x=2226) , bottom frame(sta#10,x=2226) , top frame(sta#11) , bottom frame (sta#11) , top frame(sta#12,x=2735) , bottom frame(sta#12,x=2735) , frame-lh(sta#18) , strip(sta#18) , inner plate(stepway) , plate-storage pouch rc , plate-storage pouch , top support , pouch plate rc - lh , pouch plate - lh , top supprt , bot. butt strap-fairing-lh , bot. butt strap-fairing-rh , butt strap(aft fairing)-lh , butt strap(aft fairing)-rh , doubler (fcs) -lh(#22-#23) , doubler (fcs) -rh(#22-#23) , skin-lh(sta#25-sta#26) , skin-rh(sta#25-sta#26) , channel-(iff ant.)(#19-#20) , doubler-lh(longeron)(#19-#20) , doubler-rh(longeron)(#19-#20) , doubler-lh(longeron)(#19-#20) , doubler-rh(longeron)(#19-#20) , splice strip-bottom , (sta#22)(x=5515 , rh-doubler (sta #1-#2) , scoop-oil cooler , rear scoop(oil cooler) , oil cooler duct-extension , hat stiffener-lh(sta#1b) , hat stiffener-rh(sta#1b) , stiffener(cover)-aft , stiffener(cover)-aft , doubler-lh , doubler-rh , stiffener(cover)-rh fwd , generator scoop-flange , generator scoop , rear scoop(generator cooling) , duct-top , duct-bottom , lh cover(hyd. di)(#18-#19) , stiffner-lh(#17-#18) , lh-cover(dcdb)(#17-#18) , vertical stifffener , stiffner(sta#18-sta#19) , ecs cover-rh(sta#1-#1a)) , lh-cover (sta#1a-#1) , lh doubler (sta#1a-#1) , side cover-rh , side doubler-rh , doubler(sta#14-sta#16) , rh-cover(#25 - #26) , lh-cover (gpu)(#19-#20) , outer strip side -lh , outer strip side -rh , channel-center(lh side frame) , channel-center(rh side frame) , nose rib sta#3 , nose rib sta#3 , nose rib sta#4 , nose rib sta#4 , nose rib sta#5 , nose rib sta#5 , nose rib sta#6 , nose rib sta#6 , nose rib sta#9 , nose rib sta#9 , nose rib sta#10 , nose rib sta#10 , nose rib sta#11 , nose rib sta#11 , i/s rib #3 center , i/s rib #3 center , o/b stringer #7 (top) , o/b stringer #7 (top) , shroud skin#3 , shroud skin#3 , shroud skin #4 , shroud skin #4 , shroud ri

Central Government/Public Sector

CTN :39809671

14 Apr, 2025 NA

Nashik - Maharashtra

Tender For supply of osaero job work for manufacturing of 317 parts as a package ref semfg572 - channel(sta#1c-#1d), doubler-lh(sta#1b-1c), doubler-rh(sta#1b-1c), zee member-lh, zee member-rh, strip - lh, strip - rh, frame-lh side(sta#1d), frame -lh (sta#1c), frame -lh (sta#1b), frame -rh (sta#1b), frame -rh (sta#1c), frame-rh side(sta#1d), stiffener-unfeathering pump, floor stiffener-aft(oil, accumulator, lh channel (sta#5-#6), lh channel (sta #5 - #6), lh doubler (sta #5 - #6), lh channel (sta #11- #12), lh channel(sta #11-#12), lh stiffener-top(sta#8-#10), lh channel(sta#10-sta#11), partition floor(baggage, compartment, stringer top-rh(sta#4-#5), stringer top-rh(sta#5-#6), stringer top-rh(sta#6a-#8), stiffner, stiffner, aux.frame(bottom)sta#16, doubler-lh(longeron)(#18-#19), doubler-rh(longeron)(#18-#19), stringer (sta#17-sta#18), stringer(sta#6-#7), rh stringer(sta#2-#3), bottom skin-lh(sta#14-sta#19), doubler(sta#5-sta#6), doubler(sta#1-#1a)-lh-ecs cover, doubler(sta#1-#1a)-rh-ecs cover, doubler-top-rh(sta#1-#1a), shear wall aft-lh, lh-bottom frame(sta#6), splice strap(sta#7)-lh, shear wall aft-rh, bottom frame(sta#6)-rh, stringer, lh sealing member, support bracket - (sta#1-#2)-lh, support bracket-sta#1-#2)-rh, channel(uplock bracket)-lh, channel(uplock bracket)-rh, zee stiffener(sta#4), stiffner(sta#1-#2), stiffener-rh(sta#12), rh stiffener(sta#11), lh stiffener(sta#12), lh crimped doubler(#9-#10), stiffner- lh (x=2349), stiffner -rh (x=2603), stifffner- lh (sta#12), stiffner-lh(sta#11), stiffner-rh(sta#x=2123.5), stiffner-rh(x=2349), channel-bottom floor, channel-bottom floor, stiffener bottom floor (sta#17), channel-bottom floor, channel-bottom floor, lh crimped doubler(#9-#10), stiffner (sta #4-#5), lh floor sheet(sta #9-#10), channel bot.-lh (sta #1-#2), i/b channel bot.-lh (sta #1-#2), i/b channel bot.-rh (sta #1-#2), lateral channel (sta #1-#2), channel bot.-rh (sta #1-#2), cover plate (sta.#8 to #9), battery shield sheet(sta#2), channel top (sta#1a-#1), cover, top frame(sta#10,x=2226), bottom frame(sta#10,x=2226), top frame(sta#11), bottom frame (sta#11), top frame(sta#12,x=2735), bottom frame(sta#12,x=2735), frame-lh(sta#18), strip(sta#18), inner plate(stepway), plate-storage pouch rc, plate-storage pouch, top support, pouch plate rc - lh, pouch plate - lh, top supprt, bot. butt strap-fairing-lh, bot. butt strap-fairing-rh, butt strap(aft fairing)-lh, butt strap(aft fairing)-rh, doubler (fcs) -lh(#22-#23), doubler (fcs) -rh(#22-#23), skin-lh(sta#25-sta#26), skin-rh(sta#25-sta#26), channel-(iff ant.)(#19-#20), doubler-lh(longeron)(#19-#20), doubler-rh(longeron)(#19-#20), doubler-lh(longeron)(#19-#20), doubler-rh(longeron)(#19-#20), splice strip-bottom, (sta#22)(x=5515, rh-doubler (sta #1-#2), scoop-oil cooler, rear scoop(oil cooler), oil cooler duct-extension, hat stiffener-lh(sta#1b), hat stiffener-rh(sta#1b), stiffener(cover)-aft, stiffener(cover)-aft, doubler-lh, doubler-rh, stiffener(cover)-rh fwd, generator scoop-flange, generator scoop, rear scoop(generator cooling), duct-top, duct-bottom, lh cover(hyd. di)(#18-#19), stiffner-lh(#17-#18), lh-cover(dcdb)(#17-#18), vertical stifffener, stiffner(sta#18-sta#19), ecs cover-rh(sta#1-#1a)), lh-cover (sta#1a-#1), lh doubler (sta#1a-#1), side cover-rh, side doubler-rh, doubler(sta#14-sta#16), rh-cover(#25 - #26), lh-cover (gpu)(#19-#20), outer strip side -lh, outer strip side -rh, channel-center(lh side frame), channel-center(rh side frame), nose rib sta#3, nose rib sta#3, nose rib sta#4, nose rib sta#4, nose rib sta#5, nose rib sta#5, nose rib sta#6, nose rib sta#6, nose rib sta#9, nose rib sta#9, nose rib sta#10, nose rib sta#10, nose rib sta#11, nose rib sta#11, i/s rib #3 center, i/s rib #3 center, o/b stringer #7 (top), o/b stringer #7 (top), shroud skin#3, shroud skin#3, shroud skin #4, shroud skin #4, shroud riblet #2, shroud riblet #2, nose skin (top) (sta#1-sta#3a), nose skin (top) (sta#1-sta#3a), nose skin (bot) (sta#1-sta#3a), nose skin (bot) (sta#1-sta#3a), aft rib

Central Government And Public Sector

CTN :39788135

28 Mar, 2025 NA

Nagpur - Maharashtra

Tender For supply of lhb stiffner plate of front carrier plate for aar-h-type cbc with bdg as per attached drg. no . rdso/cg/drg/24034. material specification as per is 3885, pt-ll, gr-5 with nabl test certificate. [ warranty period: 30 months after the date of delivery ]

CTN :39755555

26 Mar, 2025 NA

Sundergarh - Odisha

Tender For supply of top side bearer liner for boxn wagon

CTN :39711512

07 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk or dalmiya under job no 2502 mmg bkr as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40-63 mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , water proofing compound confirming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9 mtr isi marked with min weight of 34 kgs oblique roll , cement based paint snowcem make-berger , asian , nerolac , synthetic paint enamelled og confirming to is 5-2004 make-berger , asian , nerolac , synthetic paint enamelled brown confirming to is 5-2004 make-berger , asian , nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make-berger , asian , nerolac , loop holes 1000 x 300 mm make-tata , sail , jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , ms binding wire tata , sail , jsw , ismb hot rolled ms 125 , 4000mm long make-tata , sail , jsw , ismb hot rolled ms 125 , 1200mm long make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , prefab mild steel door of size 900x1700 , outer frame made out of isa 40x40x6mm and door shutter frmae of isa 35x35x5mm and all stiffner isa 30x30x3mm. steel shall conform to is-800 make-tata , sail , jsw , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , preferb folding double sleeping sleeping bunks made of ms columns 65x65x6 mm and ms plate from made of isa 40x40x6mm , hold fast make-tata , sail , jsw as per store list attached , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , nails various size , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make-jindal , tata , kalinga , gi pipe 20 mm dia light grade make-jindal , tata , kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make-presto , polycab , finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe make-jindal , tata , kalinga , galvanized iron strip 32 x 6 mm