Web Analytics Made Easy - StatCounter

Stone Plate Tenders

Get complete information related to latest Stone Plate Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Stone Plate Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Stone Plate Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :39429648 Due date: 14 Mar, 202514 Mar, 2025 NA
Tender For supply of portland pozzolana cement , coarse sand , stone grit , waterproof solution for concrete mix , red oxide metal primer

State Government

CTN :39410556 Due date: 04 Mar, 202504 Mar, 2025 30.00 Lacs
Tender For construction material work in gram panchayat madolai-, ghadla kankar jhajra, , mortar - mud / mortar, , lime of bud bhat for masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone and brick (for other than road work), , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit of mathar (broken by crusher), , 12/10/6mm grit stone (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 63-40mm crushed stone aggregate (cut voids 1/11), , 63-40mm hand broken stone aggregate (wides cart 1/11), , 90-45mm. hand broken stone aggregate (cut voids 1/11), , quarry rubbish (cut voids 1/6), , gravel (cut voids 1/6), , conker (cut voids 1/6), , binding material (pi 4-6) (cut voids 1/6), , brick (22.5 x 11 x 7.50 cm), , first class, , ii class, , soling / kharanja / masonry stone, , chinrai beradda (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material(3-4" thick & length and width 1-2"), , sandstone(dpc,sill,coping,lintel,tand,almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , 901 to 2300 sq. cm., , upto 900 sq.cm, , more than 2300 sq.cm, , marble chips, , marble powder, , marble stone (rajnagar ii quality/local 20mm thick), , 901 to 2300 sq. cm, , up to 100 sq cm, , more than 2300 sq.cm, , stone threshold, , single pattam size 100 x 75 mm., , double pattam size 125 x 75 mm., , stone slabs, , up to 1.5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles / blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core, , cable isi marked, , 1.50 sq mm., , poojaar's, , 2.50 sq mm., , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 6.00 sq. mm., , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30mm thick, solid core single door), , structural steel, , iron (for tor steel fe 415/500 reinforcement), , winding wire 18 gauge, , iron guard, , angle iron square rebar leaf angle iron, , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , cement concrete poles for wire fencing length 2.5 m average, , size 0.10*0.15 meter 4mm diameter high tension steer wire 8 nos, , including, , 150 cm high fencing of precast r.c posts of 15cm*15cm tapered to10*10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30*30*45cm) corner and every tenth posts to be strutted with same r.c. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with g.i. staples including earth work in excavation etc. complet, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , glass, , 3 mm thick glass, , 5 mm thick glass,

CTN :38833405 Due date: 22 Feb, 202522 Feb, 2025 NA
Tender For bid to ras supply of building material - cement of 43 grade opc in sealed bags , river sand , aggregate 20mm , aggregate 40mm , pcc bricks of size 230mmx115mmx75mm , stone boulders for hard core of size 40 to 63mm , machine pressed precast concrete interlocking paver block

CTN :38833410 Due date: 22 Feb, 202522 Feb, 2025 NA
Tender For bid to ras supply of building material - cement of 43 grade opc in sealed bags , river sand , aggregate 20mm , aggregate 40mm , pcc bricks of size 230mmx115mmx75mm , stone boulders for hard core of size 40 to 63mm , machine pressed precast concrete interlocking paver block

CTN :39423265 Due date: 03 Mar, 202503 Mar, 2025 36.32 Lacs
Tender For filling of available materials and sealing of incline mouth at 30 no incline under badjna colliery, mugma area. - based on analysis, filling with available materials lead - 1 km, providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources), centering and shuttering including strutting, propping etc. and removal of form forwalls any thickness) including attached pilasters, butteresses, plinth and string courses etc., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars of grade fe-500d or more., total impact of gst for the purpose of ctc

CTN :39410336 Due date: 25 Feb, 202525 Feb, 2025 6.50 Lacs
Tender For to supply of material and mechinary at kbristhan ward no 4 for mrgy-work-, factory made interlocking c.c. paver block m-30 grade, 80 mm thick, , fine sand, , stone aggregate (single size) : 10 mm nominal size, , stone aggregate (single size) : 20 mm, , nominal size, , coarse sand, , portland cement, , hire charges of concrete mixer 0.14 cubic metre, , more vibrant, , water supply tanker of 5000 litre capacity, , note: supply of water tanker and cement, sand, aggregate, mixture, vibrator at site as per requirement

CTN :39387315 Due date: 25 Feb, 202525 Feb, 2025 25.82 Crore
Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci

Central Government And Public Sector

CTN :39403031 Due date: 12 Mar, 202512 Mar, 2025 NA
Tender For supply of supply of 3d printed reinforced concrete panels along with steel , supply of box sections of size 100x100x5mm , supply of 16mm tmt bars , pcc solid block class a bricks , stone patti slab each of size 900x300x50mm thick , paver block m 20 grade 60mm thickness , flexible polyurethane foams sealant 750ml , exterior weather proof paint , ms loop hole of size 900x400mm , ms door of size 900x1850mm , sand bag 18 inch x34 inch hdpe as per is 11652 , pbs roll , bitumen primer , opc 53 grade cement , well graded sand , all in one aggregate , 0 point 5 mm thick metal deck ppgi sheets , 12 mm tmt rebar fe 500 grade , binding wire , steel cutting blade 4 inch dia , distemper oil emulsion obd , w2 panel , clay bricks fly ash brick aac blocks pcc block cm 1colon 4

CTN :39402878 Due date: 12 Mar, 202512 Mar, 2025 NA
Tender For supply of ordinary portland cement grade 53 , sand fine best quality , stone aggregate graded 10 to 20mm , stone aggregate graded 20 to 40mm , stone aggregate graded 40 to 63 hardcore , prior sub base course 30 to 35cm dia , precast cement concrete brick , 400 microne thick polythene film , chloride free accelerating , water reducing admixtures , wet hasseing cloth , 12mm dia ployethelene backu rod , 10mm dia polyethelene backup rod , primer for sealing compound , polyurethane based ceiling compouned , acrylic based pavement road marking paint , vibrator needle 60mm , needle 60mm for vibrator , pan mortar , spade medimum size , shovel , hammer 500 gm , hammer 1 kgs , mason hammer , bucket plastic 20 ltr , measuring tape 30 mtr , measuring tape 5 mtr , water pipe , trawler bricks , trawler rectangular iron , aluminium rectangle pipe , mason thread , water level , plum bob , mason square , sprit level , leather hand gloves , gum boots , cutter plier , hdpe drum 200 ltr , groove cutting machine , nails all size , cube moulds , wheel barrow

State Government

CTN :39373998 Due date: 07 Mar, 202507 Mar, 2025 33.63 Lacs
Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix
 Loading, Please wait...

Connect us via What's Up