Latest stoneware Tenders | Government stoneware Tenders

Central Government/Public Sector

CTN :39140947

19 Feb, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of cement opc 43 grade, 50 kg bag , pulverized sand , river sand , stone chips 20mm , tmt bar steel 12mm dia fe 500 , tmt bar steel 10mm dia fe 500 , tmt bar steel 8mm dia fe 500 , binding wire 22 swg , hardwood timber 8 inch x 1 inch, each piece length min 3 mtr , hardwood timber 6 inch x 1 inch each piece length min 3 mtr , i.w.nails 2.5 inch , i.w.nails 2 inch , g.i.pipe 40mm dia, med grade as per is 1239 6 mtr length , marine plywood 12mm , 8 x 4 ft

CTN :39101250

17 Feb, 2025 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of cement , pulverised sand , stone chips , ms rod 8mm dia , ms rod 6 mm dia , binding wire , iron wire nails 1 , iron wire nails 2 , iron wire nails 3 , empty plastic cement bag , polythene plastic sheet , plywood , white board for drawing , tiles cutter machine bosch or equivalent , circular wood cutter blade , circular rod cutter blade

CTN :39101382

17 Feb, 2025 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of cement , pulverised sand , stone chips , iron wire nails 1 , iron wire nails 2 , iron wire nails 3 , empty plastic cement bag , polypropylene plastic rope 1 , polypropylene plastic rope 2 , white cement , synthetic enamel paint red , synthetic enamel paint green , thinner , paint brush 4 inch , paint brush 3 inch , plywood

CTN :38212133

30 Jan, 2025 44.48 Lacs

Rajauri - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of material for surf work on gali anganpathri rd bet km 7 to 15 - stone chips 22.4 mm , stone chips 11.2 mm , stone chips 6.7 mm , sand , fine aggregate

CTN :38212147

30 Jan, 2025 1.00 Crore

Rajauri - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of sand supply on work site bet km 20 to 25,stone metal 63 mm supply on work site bet km 20 to 25,stone metal 45 mm supply on work site bet km 20 to 25,stone chips 6.7 mm supply on work site bet km 20 to 25,sand supply on work site bet km 31 to 34,stone metal 63 supply on work site bet km 31 to 34,stone metal 45 mm supply on work site bet km 31 to 34,stone chips 6.7 mm supply on work site bet km 31 to 34,sand supply at hmp site,stone chips 22.4 mm supply at hmp site,stone chips 11.2 mm supply at hmp site,stone chips 6.7 mm supply at hmp site

CTN :38801822

29 Jan, 2025 NA

Bijapur - Karnataka

Tender For bid to ras supply of stone , stone metal 40 mm , stone chips 20 mm , stone chips 10 mm , sand

CTN :39040508

12 Feb, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of stone chips 22.40 mm , stone chips 11.20 mm , stone chips 11.2 mm , stone chips 6.70 mm , stone chips 6.7 mm , crusher sand 1 , crusher sand 2

CTN :39050541

31 Jan, 2025 4.20 Lacs

Gajapati - Odisha

Tender For special repair to nuagada to keradango for the year 2024-25 - clearing grass and shrub jungle and uprooting stumps and small bushes and tree below 0.3m(1 -0 ) girth on premeasurement removal of rubbish on both sides of the road to facilitate widening of berms, disposal of the stuff including all labour, t&p, cess, articles required for the work etc. complete and direction of the engineer-in-charge., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam irc grade-iii (53mm to 22.4mm) specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming with stone crusher dust to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per technical specification clause 404 of mord by manual means including all labour, t&p and cost, conveyance, royality, dmf (10% over royality), emf (5% over royality), addl charges, cess & taxes of all materials required for the work complete in all respect as per direction of the engineer-in-charge., providing & applying tack coat with bitumen emulsion (rs-1) using emulsion distributor @ 2 kg per 10 sqm on the bituminous surface and cleaned with mechnial broom as per technical specification clause 503 of mord & as per direction of engineer-in-charge., providing & applying tack coat with bitumen emulsion (rs-1) using emulsion distributor @ 4 kg per 10 sqm on the prepared granular surface treated with primer and cleaned with mechnial broom as per technical specification clause 503 of mord & as per direction of engineer-in-charge., providing & laying 20mm thick premix carpet using 0.18 cum of 13.2 mm and 0.09 cum of 11.2 mm size chips for 10sqm on road surface using 14.60 kg. penetration grade of bitumen (60/70) for 10 sqm over the prepared surface including hand packing to proper camber and consolidation with prr inclusive of hire and running charges of prr, bitumen mixtures, tar boilers and all other t&p articles and also including cost conveyance royalty, dmf (10% over royality), emf (5% over royality), addl charges, with cost of all labour charges & cess etc complete as per specification and direction of the engineer-in-charge, providing and laying 6mm thick pre-coated seal coat type b using 0.06 cum of 6.7 mmsize h.b.g. chips and down graded as per sieve analysis per 10 sqmand 6.8 kg ofbitumen(60/70) for 10 sqm on the road surface area & rolling with prrincluding hire and running charges of prr and all othermachineries, cost, conveyance & royality, dmf (10% over royality), emf (5% over royality), addl charges, of 6mm size hard black granite chips with all labour, t&p and cess required for the work etc complete as per specification & direction of engineer-in-charge., construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & clause 305 of mosrt&h specifications for road and bridge works (4th revision) with cost of all labour, t&p and with cess, royality dmf (10% over royality), emf (5% over royalityand as per direction of engineer-in-charge.

Central Government/Public Sector

CTN :38893877

27 Jan, 2025 9.66 Lacs

Tuticorin - Tamil Nadu

Tender For corrigendum : supply of miscellous of electrical work replacement of cable and highmast repair- supply of lt power cable 3.5cx300sqmm , laying of cable in rcc hume metal hdpe pipe above 185sq. mm and upto 400 sq. mm , laying of cable in open duct above 185sq. mm and up to 400 sq. mm , suplying and making straight through joint with heat shrinkable kit 3.5cx 300sqmm , supplying and making end termination 3.5c x 300sqmm , providing laying and fixing following dia g.i. pipe for following side 150mm dia , laying of hdpe pipe of 110mm dia , dismantling and re erection of 20mtr high mast , supply of 6mm dia ss wire 304,7 x 19 rope for 20 mtr high mast , supply of trailling cable 5c x 2.5sqmm copper cable for high mast , laying of hdpe dwc pipe of 125mm through existing culvet stoneware

State Government

CTN :38794157

03 Feb, 2025 34.14 Lacs

Kheda - Gujarat

Tender For corrigendum : supplying and stacking various types of building, road and other construction materials at various palces of taluka mahemdabad under taluka panchayat, mahemdabad under mgnrega ( annual unit rate ) - brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, coal tar, blasting powder, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, marble dust/ powder, marble chips up to 4 mm and downsize white &black, silicon and acrylic emulsion, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, aluminium paint, acid proof paint (chocolate or black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, black colour dark shade pigment, green or blue medium shade pigment, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, standard quality hard board sheet 3 mm thick, standard quality hard board sheet 4.5 mm thick, shellac, spirit, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, coal tar, blasting powder, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, marble dust/ powder, marble chips up to 4 mm and downsize white &black, silicon and acrylic emulsion, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, aluminium paint, acid proof paint (chocolate or black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, black colour dark shade pigment, green or blue medium shade pigment, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, standard quality hard board sheet 3 mm thick, standard quality hard board sheet 4.5 mm thick, shellac, spirit, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists

Stoneware Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government