Latest storm water pipe laying Tenders | Government storm water pipe laying Tenders

State Government

CTN :40127210

12 Nov, 2025 59.82 Lacs

Malda - West Bengal

Tender For corrigendum : laying of dedicated pipe line for improvement of functionality and design, supplying. fabrication, erection commissioning including 3 (three) months trial run of 135m3 hr. capacity pressure type iron elimination plant with backwash water disp

State Government

CTN :42353229

14 Nov, 2025 62.02 Lacs

Gandhinagar - Gujarat

Tender For supply, installation, testing and commissioning of bowser filling arrangement at fire station in dta area of gift city - 1200016578vertical turbine pumpset 6000 lpm 40 m"pump set:supply, installation, testing and commissioning of vertical turbine pumping set complying to moc as mentioned below;a) discharge head material - steel fabricatedb) column pipe material - steel fabricatedc) line shaft and coupling material ss aisi 410d) bowl diffuser material - cast iron fg 260e) impeller - bronze lbt2f) pump shaft material - ss aisi 410g) seal material - gland packingh) suction bell strainer material - ss aisi 304 pn 16 compliant pump with motor of ie2 efficiency rating, 1450 rpm, ip 68 enclosure suitable for 400 or 440 volts, 3 phase, 50 hz a.c.supply no. of pumps: 2 (1 working +1 standby) equal to 1 set . complete set system to be mounted on a suitable footing, suction should include suitable strainer arrangement.pump set shall be suitable for opration to suit for fire water circulation. pump set to be installed in underground fire water tank.minimum pump efficiency 70 percent.the cost must be inclusive of associated civil work complete as per instruction of giftcl engineer- in - charge.the cost includes lifting, shifting, loading, unloading, testings etc. as required for installation as per drawing and as directed by giftcl engineer-in-charge.for bowser filling arragement at fire station, gift city set of two pumps( 1 working+ 1 standby)capacity - 6000 lpmhead - 40 m, 1200016579ms erw pipe c class 250mm dia"ms pipe: ""supply, installing, testing and commissioning of erw ms pipe of c class (heavy duty) conforming to is 3589 as per tender specification and as directed by the engineer in-charge. pipes to be supplied with bevel ends and to be black varnished on outside surface. painting with primer application and 2 coats of enamel paint of approved colors.quoted rate shall includes the following:a. supply & installation of fiitings like blind flanges with matching flanges (as per asme 16.47 series b/is 1538), elbows, tees, reducers (as per asme 16.9), mitre joint, asbestos free gaskets, nut bolts, reinforcement pads, suitable structural support arrangement etc. painting with primer application and 2 coats of enamel paint of approved colorsb. lifting, shifting, loading, unloading, cutting, grinding, welding, non destructive testings like visual test, dpt, rt etc. as required for installation of pipe as per drawing and as directed by engineer-in-charge for the following size: 250 mm dia erw pipe of minimum 6 mm thickness""", 1200013274sitc 200mm dia erw pipe"supply, installing, testing and commissioning of erw carbon steel pipes of grade fe 410 conforming to is 3589 as per tender specification and as directed by the engineer in-charge. pipes to be supplied with bevel ends and to be black varnished on outside surface. painting with primer application and 2 coats of enamel paint of approved colors.quoted rate shall includes the following:a. supply & installation of fiitings like blind flanges with matching flanges (as per asme 16.47 series b/is 1538), elbows, tees, reducers (as per asme 16.9), mitre joint, asbestos free gaskets, nut bolts, reinforcement pads, etc. b. lifting, shifting, loading, unloading, cutting, grinding, welding, non destructive testings like visual test, dpt, rt etc. as required for installation of pipe as per drawing and as directed by engineer-in-charge for the following size: 200 mm dia erw pipe of minimum 6 mm thickness", 1200013276sitc pressure guage 0-6 kg/cm2 rangesupply, installation, testing & commissioning of 150 mm dial size pressure gauge with range 0 - 6 kg/cm2 to monitor the pressure in line, with accuracy 1 percent of span, overage protection 150 percent of full range and ip 65 enclosure protection as per tender specifications and as directed by the engineer in-charge., 1200000526nrv 250 mm sitcnon return valves- providing, supplying, lowering, laying and jointing in position following c.i.d

State Government

CTN :40183142

21 Nov, 2025 14.56 Lacs

Malda - West Bengal

Tender For corrigendum : design, supplying. fabrication, erection an commissioning including 3 (three) months trial run of 25m3/hr. capacity pressure type iron elimination plant and backwash water disposal at head work site and laying of dedicated/parallel pipe line

CTN :42180067

17 Oct, 2025 19.90 Lacs

Faridabad - Haryana

Tender For corrigendum : estimate for providing and laying 300mm dia. s.w. sewer line and 100mm dia. pvc 6kg pressure isi mark water supply line panchal pocket omvelly road in rajiv colony in ward no. 01 nit faridabad. (map id 3304)

CTN :42093010

20 Oct, 2025 NA

Mysore - Karnataka

Tender For tender for supply of supply installation and commissioning of fully inverter type ivrf ac unit : : - supply of vrfv plus air conditioning system with energy efficient fully inverter scroll type compressors capable of delivering 100 % capacity at 43degree ambient and capable operating between 320v 460v with high performance oil accumulators self diagnostics redundant outdoor unit and indoor units.ivrfb 22tcn , indoor units with all supporting materials for hanging and fixing for existing duct. a. 6tr ducted indoor , b. 8tr ducted indoor , c. corded remotes , d. cordless remotes , installation , nitrogen pressure testing , vaccumising and commissioning of vrf odu units , installation charges for ducted indoor units , supply and laying of hard drawn copper refrigerant piping with elbows , couplings , reducer and slotted supports for suction and discharge line , supply and fixing of 19mm and 13mm thick nitrile rubber insulation for above copper pipe and ppe covering with fire retardant tape , refrigerant gas charging r410a , lifting , shifting and erection of ivrf outdoor units , communication cable for idu to odu , drain pipe cpvc with insulation , ms channel stand for odu units , scaffolding charges , dismantling charges for existing indoor units , dismantling charges for existing outdoor units , canvas fire proof for connection between indoor and cool air duct connection

State Government

CTN :42023084

17 Oct, 2025 24.64 Lacs

Tezpur - Assam

Tender For shifting of distribution system and installation of fhtc damage due to widening of pwd road at siporia batabari pwss under sopd-g for the year 2025-26 under tezpur division-ii, dhekiajuli - providing, laying, jointing, testing and commissioning of isi marked pe 63 grade, pn6 pressure rating high density polyethylene (hdpe) pipes suitable for drinking water supply conforming to is:4984-2016 (with up to date & latest ammenments at the time of execution) from manufacturer store including providing all necessary specials viz., bend, tee, enlarger/reducer, end plug etc. (matching with the prescribe grade & pressure rating same as to that of pipe) and including transportation of the pipes & specials upto work site including handling charges; lowering and laying of pipes & specials in line and level in trenches and/ or over supports ( minimum cover of pipe in trenches shall be 1 meter); jointing of pipes & required specials etc. by fusion welding; construction of required valve chamber and, hydraulic testing of the same (both pipes & specials), including providing all necessary labour & equipment etc., all complete, as directed and specified. 110 mm dia pipe, 90 mm dia pipe, providing functional household tap connection including earthwork in excavation for pipe line (both for connection in distribution line and service connection) and refillling, dressing etc., providing pvc/ hdpe saddle piece of average size 110 mm x 15mm(i.e. ranging from 63mm to 160mm), making holes in the distribution pipe, providing 15mm dia bronze ferrule cock (pn-16) conforming to is:2692 (1989) as ammended from time to time / flow control valve of ss316 with flow of 3 lpm at standard operating pressure of 0.5 bar to 1.5 bar of minimum weight 125gm, connecting it to the saddle piece, providing and fixing 3 layer (outer green / grey coloured middle black coloured uv stabilised and innermost layer white coloured with antimicrobial property) fusion welded pp-r ( poly propylene- random copolymer) pipes, sdr 7.4 having thermal stability for hot and cold water supply conforming is 15801-2008 of average length 10m from saddle piece to the standpost ( pipes of make empanelled manufacturers and pn-16 pipe, 20mm od, sdr-7.4) including all plain pp-r fittings and brass threaded pp-r fitting and clamping, cutting and making good to the damages, including all taxes and duties as applicable and including the cost of all required labour and materials as directed and specified. the item also includes construction and installation pf r.c.c hydrant pillar with cement concrete in proportion 1:2:4 sheathed in swr pipe of dia 100mm height 1200 mm encasing 15mm dia ppr pipe inside the hydrant, inclusive of cost of transportation to site and also supplying fitting and fixing pvc bib cock all complete as directed and specified. approved good for construction drawing will be issued by the deptt.

Storm Water Pipe Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government