Latest straw cutter Tenders | Government straw cutter Tenders

State Government

CTN :39482651

10 Mar, 2025 8.54 Lacs

Fazilka - Punjab

Tender For corrigendum : boring and installing 200 mm dia pvc straight tubewell 200 mtr. depth, providing, laying, cutting, jointing, testing of pvc pipe 10 kg/cm2 for rising main, pumping machinery and all other works contingent thereto.

CTN :39567382

24 Mar, 2025 3.50 Lacs

Kapurthala - Punjab

Tender For repair of m.c machinery ( tractor, trolley, tata ace, e rickshaw, jcb, rehri, sweeping machine, grass cutting machine, bailing machine , remediation machine etc) m.c sultanpur lodhi.

CTN :39151060

19 Mar, 2025 NA

Cuttack - Odisha

Tender For corrigendum : veterinary care equipment consumables and ancillaries - ai gun, semen straw cutter, ai sheath container, ai gun container, tamponing forcep 18", alpha sheath single pack, gloves full hand disposable ( sensitive gloves forai), gloves full hand disposable (super sensitive gloves for pd), mini ai gun caprine for cervical/trans cervical artificial insemination:, mini sheath suitable for caprine mini syringe:, video assisted reproductive tract diagnostic tool cum digital artificial insemination gun, kit bag, cryo container- 3 lts ((ba-3), cryo container- 35 lts (ba-35), cryo container- 50 lts (ta-55), frozen semen straw lifter, digital/electronic semen thaw unit 475 ml capacity, ppe kit, n-95 mask, sterile latex examination gloves, cotton apron, gum boots full size, gum boots full size, gum boots full size, digital thermometer, scissors straight (10'') ss, portable digital radiography, medical tent, suction device, glucose monitor, ecg machine, burdizoo castrators for large animals, bench platform stainless steel weighing balance (capacity 200kg), portable veterinary ultrasound machine , thermocuttery unit, modular ot, catgut-no-1-0 , chromic catgut, suture length-76cm, catgut-no-2-0 ,chromic catgut, suture length-76cm, catgut with needle, catgut with needle, catgut with needle, polydiaxonone suture-no.1-0 (pack of 12) , polydiaxonone suture-no.2-0 (pack of 12) , polydiaxonone suture with needle, polydiaxonone suture with needle, polydiaxonone suture with needle, polyamide suture with traumatic needle, polyamide suture with traumatic needle, polyamide suture with traumatic needle, polyglactin suture-no-1-0 (pack of 12) , polyglactin suture-no-2-0 (pack of 12) , suturing needle, suturing needle, suturing needle, suturing needle, ai tray ss, spay hook, goblet holding forcep 18, ear forceps, suture cutting scissor, casting rope, casting rope, dressing forceps, forceps specimen holder, scalp vein set-sterile butterfly wing luer lock, 20g pouch pack/blister pack set , scalp vein set, gauze cloth, roller bandage 10cm x3m,gauze/cotton, roller bandage 15cm x3m,gauze/cotton, 2ml disposable syringe with 24 g needle , 5ml disposable syringe with 18 g needle , 5ml disposable syringe with 20g needle , 10ml disposable syringe with 18g needle

State Government

CTN :39537604

22 Mar, 2025 1.20 Crore

Kamrup - Assam

Tender For supply of paper making plant machinery - fiber shredder machine , wet banana fiber opening machine , automatic fiber cooker with steam generator , fiber pulper machine , centrifuge for pulp , agitator assembly mixer , balance tank premixing , paper moulding assembly , working table , hydraulic press machine , paper drying chamber , paper straightening machine , automatic paper cutting machine , office file making machine , electric control panel

CTN :39511244

07 Mar, 2025 13.01 Lacs

Multi City - Karnataka

Tender For supply of materials and machinery for construction of panchayath building at mahishwadagi villege of athani taluka - atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn23 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for foundations, footings,, atn22 burnt bricks class 35 (non modular), atn21 casurina poles 100 - 150 mm, atn20 stone chistler class ii, atn2 coarse sand (zone iii), atn19 mason class ii (with tools), atn18 mason class i (with tools), atn17 boulders, atn16 size stone 20 x 20 x 25 cms, atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn-1 granite/trap broken metal 100 mm and down size, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn35 providing and laying flooring using prepolished water cut/ gang saw 19mm thickgranite laid with a bed of 20mm thick cost of all materials mortar and etc complete, atn31 providing and fixing m.s.grill work for windows and ventilators weighing 21kg/sqm usingm.s. flats, or m.s. square rods, or combination of m.s. flats and square rods as per approved design,drawing including cutting steel sections and welding the same to required pattern with a coat of red leadprimer, cost of materials, fixtures, labour and hom of machinery complete as per specifications, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn24 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for columns, atn48 supply of display name board, atn47 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability forhot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clampsat 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and thecost of cutting chases and making good the same including testing of complete as per direction ofengineer-in-charge. concealed work, including cutting chases and making good the, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn45 providing and installing at site of work p.v.c. pipes including cost of pipes andspecials and labour, including lowering into trenches, laying true to line, level and perfect linking at jointsleak proof including jointing of approved type with all labour and lift charges, handling charges includingencasing the pipe alround to a depth not less than 15 cms with gravel or selected earth available fromthe excavation etc. complete. for pvc pipes of 4 kg./cm2 110 mm, atn44 providing and installing at site of work p.v.c. pipes including cost of pipes andspecials and labour, including lowering into trenches, laying true to line, level and perfect linking at jointsleak proof including jointing of approved type with all labour and lift charges, handling charges includingencasing the pipe alround to a depth not less than 15 cms with gravel o

CTN :39491742

07 Mar, 2025 33.31 Lacs

Dausa - Rajasthan

Tender For gsb wbm work ward no. 26 to 55, dausa. - providing, laying, spreading and compacting of granular sub-base by providing close graded material (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion., grading - iii material, coarse graded granular sub-base material 53 mm to 26 .5mm, carriage of materials (by mechanical means) stone, boulders, gravelly material 5 km, dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m., construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km), random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand), providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)drain work, providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size)., providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np3 class (with s/s ends) is: 458 - 1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with rubber gaskets (epdm/sbr) for sewer lines as per is: 5382 (including cost of rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by engineer. note : e/w to be measured and paid separately. length of pipe shall be measured in between the outer wall of two manholes / inspection chambers. pipe in the manhole/inspection chamber s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable., 450 mm internal diameter, 600 mm internal diameter, hydraulic excavator of 1 cum bucket (with deasel, driver & helper)

CTN :39487539

04 Mar, 2025 33.31 Lacs

Dausa - Rajasthan

Tender For gsb & wbm work ward no. 26 to 55, dausa.-, providing, laying, spreading and compacting of granular sub-base by providing close graded maternal (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by max in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion, , grading-iii maternal, , coarse graded granular sub-base material 53 mm to 26.5mm, , carriage of materials (by mechanical means) stone, boulders, gravelly material 5 km, , dressing of earth work in surface excavation including cutting and filling upto 30cm depth mcluding disposal of excavated earth upto som and lift upto 15 m, , construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305 (lead taken upto 5 km), , random rubble masonry with hard stone in foundation and plinth cement mortar 16 (1 cement 6 coarse sand), , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 124 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size), , drain work, , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level, , 148 (1 cement 4 fine/coarse sand 8 graded stone aggregate 40 mm nominal size), , providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np3 class (with s/s ends) is. 458-1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with rubber gaskets (epdm/sbr) for sewer lines as per is 5382 (including cost of rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by engineer note e/w to be measured and paid separately length of pipe shall be measured in between the outer wall of two manholes /inspection chambers. pipe in the manhole/inspection chamber's wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable., , 450 mm internal diameter, , 600 mm internal diameter, , hydraulic excavator of i cum bucket (with deasel, driver & helper)

CTN :39409596

03 Mar, 2025 10.00 Crore

Bhopal - Madhya Pradesh

Tender For e-tender are invited online for the supply of veterinary instrument, equipments and others item from manufactures, stokist and authorized distributors for the year 2025-26 - item, a.i guns french mini with container (as per specifications) (sample), a.i kit (as per specifications) (sample), a.i sheaths french mini (as per specifications) (sample), a.i.crate cum travis (as per specifications) (sample), disposable a.i gloves (as per specifications) (sample), straw cutter round plastic body (as per specification) (sample), p.v.c. goblets made of virgin plastic round size 35mm x118mm (sample), p.v.c. goblets made of virgin plastic round size 65mm x118mm (sample), rubber gum boot size 9 no(sample), rubber gum boot size 10 no (sample), nitrile examination gloves medium (sample), nitrile examination gloves large (sample), disposable latex surgical gloves no. 6.5 sterilized isi marked (sample), disposable latex surgical gloves no. 7.5 sterilized isi marked (sample), allies tissue forceps size 8 (sample), long forceps size 20 (sample), long curved throat forceps (sample), dressing forceps straight 30cms (sample), dressing scissors curved 8 (sample), dressing scissors straight 8 (sample), artery forceps straight 8 (sample), artery forceps curved 8 (sample), clipper scissors size 20 cm curved (sample), mayo scissors straight 7.5 (sample), mayo scissors curved 7.5 (sample), suture cutting forceps size 6 (sample), suturing needle straight traumatic and traumatic size no. 1 (pkt of six) (sample), suturing straight curved traumatic and traumatic size no.5 (pkt of six) (sample), b.p blades sterilized with isi mark (pkt of 100 blades) size 15 (sample), b.p blades sterilized with isi mark(pkt of 100 blades) size 24 (sample), b.p handle size 4 (sample), b.p handle size 3 (sample), disposable needle 16 gauge 1.5 (sample), disposable needle 18 gauge 1.5 (sample), disposable needle 20 gauge 1.5 (sample), disposable2 ml syringe with needle (as per specification) (sample), disposable 5ml syringe with needle (as per specification) (sample), disposable10 ml syringe with needle (as per specification) (sample), disposable 20 ml syringe with needle, disposable syringe without needle 2 ml (as per specification) (sample), disposable syringe without needle 5 ml (as per specification) (sample), disposable syringe without needle 10 ml (as per specification) (sample), disposable syringe without needle 20 ml (as per specification) (sample), disposable syringe without needle 50 ml (as per specification) (sample), 5 ml disposable syringes with needle 21 (as per specification) (sample), automatic breaking single use vaccination syringe 2 ml 16g, 3/4 inches needle (sample), automatic breaking single use vaccination syringe 5 ml 18g, 3/4 inches needle (sample), disposable i.v set sterilized, non-pyrogenic, with double filter and needle 16 1/2 gauge (sample), operation table for large animals (hydraulic) (as per specification) (catalogue), operation table hydraulic for small animal with remote (as per specification)(catalogue), working table for hospital and labs (as per specification) (sample), examination table (as per specification) (sample), veterinary surgical equipment kit (for large animals) (as per specification) (sample), veterinary surgical equipment kit (for small animals (as per specification) (sample), polyglact in 910 with ingra care coating 3-0 round body, polyglact in 910 with ingra care coating 1-0 reverse cutting, absorbent pad (size 20x8 cm) sample, absorbent pad (size 12x12 cm) sample, chromic 1 , rb (as per specification) (sample), bb silk 2-0 rb(as per specification) (sample), autoclave 10 lit. with dressing drum bin ss (as per stratification) (sample), hoof cutter double action (sample), instrument cabinet (as per specification) (sample), instrument trolley (as per specification) (sample), hoof trimming set (as per specification) (sample), docking machine for large animals, chrome plated (sample), bowls stainless steel size 20 cms (sample), long

CTN :39474818

11 Mar, 2025 NA

Valsad - Gujarat

Tender For mandva vdvk - purchase of machinery and equipments for valueaddition of minor forest produce under pm vdvk - cashew boiler, cashew nut processing unit, automatic cashew nut cutting machine, vacuum sealing machine

CTN :39448163

17 Mar, 2025 NA

Bathinda - Punjab

Tender For dnit for providing and laying cutting jointing and testing of 750mm and 400mm i/d di k7, 200mm - 315mm o/d upvc pipe sewer, construction of brick masonry manhole chamber, mps including machinery, 400mm i/d di k-7 rising main, complete in all respects

Straw Cutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government