Latest structural angle Tenders | Government structural angle Tenders

State Government

CTN :39889103

10 Apr, 2025 18.71 Lacs

Dalhousie - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing commissioning for sop to jsv for sewerage treatment plant by prov. 11/.4 kv 100 kva s/stn. at gosan a/w 11 kv ht/lt line , in section bharmour-1 under esd bharmour ed chamba - supply part 11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 200 kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no., ms angle iron (35x35x5 mm), length : 460 mm x 2 nos, ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles, copper thimble, danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-95mm sq., energy meter (3-phase, 4-wire) dlms compliant 1000/5a ct type for 63 kva transformer, alluminium paint, prov.acsr, 6/1/3.35 mm, prov. hp make aiq desktop model hp 200 g4 with intell core 3-10110u-10 gen.processor, 8gb ddr4 ram expenditure upto 16 gb, itb, hdo (t2qorpm)2st antiglare led desplay withfhd (1920x1060) integrated hd graphics & webcam, 2xusb, 3.0 2xusb, 2.0 cardreacer. audio part vgnhdmi/dp port, 10x100, 1000mcomdliant lan usb key board & mouse internalspl. connectivity bo2 11 b/g/n/ac pl windows etc. with three years on site warranty. (ii) 650va offline ups system with12vx7ahx2nos: 158vah/smf batteryto povide20 min. battery back upwith three year warrantyon ups &battery from delivery with printer, hp monocrom laser printer (a4) hp laser 108a with prints upto 20 ppm,64 mb ram 600x600 dpl print resolution 150 sheets paper tray capacity usb 2.0 port- one year waranty, beetal m88 plan phone (one set contains 2 nos phone), beetal m71n land line phone, 11 fin oil filled room heater make havel, prov. transformer plinth protection for 100kva s/stn structure a/w chain link fencing, angle iron gate etc. for dtr fencing., erection part 11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 200 kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no., ms angle iron (35x35x5 mm), length : 4

State Government

CTN :39889104

10 Apr, 2025 16.49 Lacs

Dalhousie - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing commissioning for sop to jsv for lis kakdolu by prov. 11/.4 kv 100 kva s/stn. a/w 11 kv ht/lt line , in section maredi under esd chamba-ii ed chamba - supply part 11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 200 kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no., ms angle iron (35x35x5 mm), length : 460 mm x 2 nos, ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles, copper thimble, danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-95mm sq., energy meter (3-phase, 4-wire) dlms compliant 1000/5a ct type for 63 kva transformer, alluminium paint, prov.acsr, 6/1/3.35 mm, prov. hp make aiq desktop model hp 200 g4 with intell core 3-10110u-10 gen.processor, 8gb ddr4 ram expenditure upto 16 gb, itb, hdo (t2qorpm)2st antiglare led desplay withfhd (1920x1060) integrated hd graphics & webcam, 2xusb, 3.0 2xusb, 2.0 cardreacer. audio part vgnhdmi/dp port, 10x100, 1000mcomdliant lan usb key board & mouse internalspl. connectivity bo2 11 b/g/n/ac pl windows etc. with three years on site warranty. (ii) 650va offline ups system with12vx7ahx2nos: 158vah/smf batteryto povide20 min. battery back upwith three year warrantyon ups &battery from delivery with printer, hp monocrom laser printer (a4) hp laser 108a with prints upto 20 ppm,64 mb ram 600x600 dpl print resolution 150 sheets paper tray capacity usb 2.0 port- one year waranty, prov. transformer plinth protection for 100kva s/stn structure a/w chain link fencing, angle iron gate etc. for dtr fencing., erection part 11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 200 kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no., ms angle iron (35x35x5 mm), length : 460 mm x 2 nos, ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transform

corporations/Associations/Others

CTN :39881615

19 Apr, 2025 NA

Sehore - Madhya Pradesh

Tender For auction sale of iron scrap of tower parts gi/black (bent/ twisted/ welded),iron scrap of ms rail pole, angle, channel, plate cut pieces up to 1 mtr etc

State Government

CTN :39890187

21 Apr, 2025 NA

Panchmahal - Gujarat

Tender For providing material in mgnrega scheme at ta.halol - cement isi mark 53grade, etc.opc, white cement, tmt bars fe-415, hysd steel bars, r.c.c. np3 pipe 900m.m. dia, r.c.c. np3 pipe 600m.m. dia, r.c.c. np3 pipe 300m.m. dia, crushed stone aggrigate for hard qulity 10 to 20 mm, crushed stone aggrigate for hard qulity 40 to 63 mm, hand broken metal 25-90m.m., rubble local, coarse sand, quarry dust, bricks- convention size, binding wire, kota stone 25m.m. thick, glaze tiles, vitrified granite tiles 8 mm to 10 mm tick 24 x 24 size, m.s. grill(market rate), pvc water tank 1000 ltr, galvenise iron sheet 0.8 tick corrugated class 3, iron angle, pevar block m 200 grade 60 mm tick, hire charge for mixer machine rent, hire charge for water tanker rent 6kl capacity, murram (binding material), iron door (market rate), iron window (market rate), road roller hire charges 8 tone, wash basin 550*400m.m., colour distamper primer, oil bound distemper, marble slab/platform 25m.m. thick double polished, galvanised mild steel tube medium grade 20m.m., galvanised mild steel tube medium grade 32m.m., galvanised mild steel tube medium grade 40m.m., indian type wc pan size 580x 400m.m., cast iron nahni trap, pvc swr p-trap for drain 110*110, flush cock - cement isi mark 53grade, etc.opc, white cement, tmt bars fe-415, hysd steel bars, r.c.c. np3 pipe 900m.m. dia, r.c.c. np3 pipe 600m.m. dia, r.c.c. np3 pipe 300m.m. dia, crushed stone aggrigate for hard qulity 10 to 20 mm, crushed stone aggrigate for hard qulity 40 to 63 mm, hand broken metal 25-90m.m., rubble local, coarse sand, quarry dust, bricks- convention size, binding wire, kota stone 25m.m. thick, glaze tiles, vitrified granite tiles 8 mm to 10 mm tick 24 x 24 size, m.s. grill(market rate), pvc water tank 1000 ltr, galvenise iron sheet 0.8 tick corrugated class 3, iron angle, pevar block m 200 grade 60 mm tick, hire charge for mixer machine rent, hire charge for water tanker rent 6kl capacity, murram (binding material), iron door (market rate), iron window (market rate), road roller hire charges 8 tone, wash basin 550*400m.m., colour distamper primer, oil bound distemper, marble slab/platform 25m.m. thick double polished, galvanised mild steel tube medium grade 20m.m., galvanised mild steel tube medium grade 32m.m., galvanised mild steel tube medium grade 40m.m., indian type wc pan size 580x 400m.m., cast iron nahni trap, pvc swr p-trap for drain 110*110, flush cock

corporations/Associations/Others

CTN :39886420

09 Apr, 2025 17.00 Lacs

Jhansi - Uttar Pradesh

Tender For supply of material for 500 bedded medical college jhansi. - earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, rcc work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inlcuding supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being inlcuded in the item., class-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in foundation excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, class-150 half brick work in 1:4 cement and coarse sand mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., "steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.including suply and wastage & overlapping.thermo-mechanically treated bars of grade fe-500d or more.", 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand), providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angels 40x40x6 mm for diagonal braces, providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete., one priming coat & one coat oil distemper on new work inlcuding supply of all materials. labour and t&p etc. required for proper completion of the work, painting or varnishing or iron works in small areas with one coat of ready mixed in priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of work paint to be used should confirm to the i.s.i. no. 103 1950, finishing walls with acrylic smooth exterior paint of required shade: - new work (two or more coat applied @ 1.67 ltr./10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm., kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid

CTN :39874657

07 Apr, 2025 NA

Chittaranjan - West Bengal

Tender For supply, installation, testing & commissioning of (150 mm width x 50 mm depth x 1.6 mm thi ckness) perforated hot dipped galvanized iron cable tray (galvanization thickness not less than 50 micron s) with perforation not more than 17.5%, in convenient sections fixed with ms angle frame duly painted of 35 mm x 5 mm thick and all hardware complete in all respect. [ warranty period: 30 months after the dat e of delivery ]

CTN :39893699

17 Apr, 2025 3.97 Lacs

Hukkeri - Karnataka

Tender For supply of materials to consturction of compound wall at govt. higher primary girls school of yalimunnoli village of hukkeri tauka. - ymn01-enamel paint, ymn01-dry distemper, ymn01-angle iron 40x40x6mm, ymn01-gusset plates 3.15 mm thick, ymn01-ms sheet 1 mm thick, ymn01-gi pipe 50 mm dia b class, ymn01-40 x 6 mm ms plates, ymn01-36 mm x 6mm ms plates, ymn01-16 x 16 mm ms square rod, ymn01-50 mm dia ms hollow pipe b class 14 gauge, ymn01-casurina poles 100 - 150 mm, ymn01-latrite, ymn01-tmt bars fe 500, ymn01-bond stone 20 x 20 x 45 cm, ymn01-rubble stones, ymn01-boulders, ymn01-portland cement, ymn01-coarse sand (zone iii), ymn01-broken stone aggregate 12 mm to 10 mm size, ymn01-broken stone aggregate 20 mm size, ymn01-broken stone aggregate 40 mm size

CTN :39901115

23 Apr, 2025 2.00 Crore

Delhi - Delhi

Tender For procurement of equipment, instruments, machinery, tools etc. related to laboratories and workshops of electronics & telecommunication engg., engineering physics, engineering mechanics of mirik government polytechnic, mirik, dist - "spherometer , (screw pitch 0.05 mm and lc 0.005 mm)", "concave mirror , (focal length 20 cm)", "convex mirror, (focal length 20 cm)", "concave surface , (focal length 20 cm diameter 50 mm)", "hook's law apparatus , (consisting of 30 cm long mirror scale,, spring, slotted weights with hanger and, pointer, complete on heavy tripod stand)", "mercury , (distilled liquid mercury, grade std.-biotech grade)", "flywheel apparatus , (thickness: 4.4 cm diameter :20 cm)", cantilever (length 100 cm, hook at one end, c clamp), light weight hanger (metal slotted weight mechanics physics experiment equipment set with hook with weight of each mass of the order of 50gm or 100 gm), "inverse square law apparatus (optical bench, photocell housed with, red and black sockets, lamp house with lamps, dc microammeter)", stopwatch (digital stopwatch with ms count), high resistance box (resistance box plug with 1 to 10 k ohm resistance), "winch crab single purchase with weight, [experiment set up winch crab single purchase- fitted with heavy cast iron wall brackets the grooved wheel is of 25 cm diameter and gears are machine cut. string, weight box with pan. ]", "winch crab double purchase without weight, [experiment set up winch crab single purchase- fitted with heavy cast iron wall brackets the grooved wheel is of 25 cm diameter and gears are machine cut. ]", "worm and worm wheel single without weight , [experiment set up consisting of machine cut worm gear of 25 cm diameter, carrying a metal drum on 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm, complete with effort pulley, string with pan.]", "worm and worm wheel double without weight , [experiment set up consisting of machine cut worm gear of 25 cm diameter, carrying a metal drum on 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm, complete with effort pulley, string with pan.]", "wheel & axle simple without weight, [standard setup for lab.]", "simple screw jack with weight, [experiment set up screw jack ( weights)all metallic construction accurately machine cut screw with a pitch of 5 mm carrying a double fanged turn table of about 20 cm diameter. fitted on a heavy cast iron base and complete with two adjustable pulleys, cord and hook. weights are included.]", ", combined inclined plane & friction slide apparatus iron base & with weight, [standard setup for lab.]", "parallel forces apparatus, [experiment set up simple supported best type supported at its end. for verification of condition of equilibrium of parallel forces, law of lever & forces on beam etc. consisting of two compression thrust type 10 kg tubular spring balances fixed on wooden polished board, a wooden beam with steel back plate. complete with two strups, hooks & two 10kg weights. ]", "to verify lamis theorem , [gravesand apparatusboard: wooden with metal base, pulley: z-pullies (2 nos), with adjustable distance, weight set: 5x50 g (3 sets). ]", "simple jib crane apparatus iron stand with weight, [experiment set up with consisting of a tubular compression balance, pivoted about an axis fitted to the base. the tie chain has an adjustable angle bracket and fitted with a 10kg extension balance. completion wooden base with 1.2 meter jib. with weights. ]", "mini drafter, t square, protractor, set squares, compass, divider, [made out of wood. to be used in chalk board]", "model of geometric constriction (solid cube, solid primed, cylinder, cone, hexagon, tetrahedron ), [made out of wood. to be used in chalk board]", "amplitude modulation and demodulation trainer kit, [message signal:100 hz to 2.8 khz, carrier signal 28 khz to 108 khz,modulation : balanced modulator, amplifier : op amp based, demodulation : diode detector & lpf(6th order

State Government

CTN :39733844

04 Apr, 2025 NA

Hooghly - West Bengal

Tender For supply of essential items for garage work shop dept of chandernagore municipal corporation - m.s. sheet black 8x4x " (as per sample), m.s. sheet black 8x3x " (as per sample), m.s. sheet black 8x4x1/16" (as per sample), m.s. sheet black 8x3x1/16" (as per sample), m.s. sheet black 4x4x " (as per sample), m.s. sheet black 8x4x " (as per sample), m.s. sheet black 4x4x " (as per sample), m.s. sheet cr 8x4x1/16" (as per sample), g.i. plain sheet 8x4x24 sug (as per sample), g.i. plain sheet 8x3x24 sug (as per sample), g.i. plain sheet 6x3x1/16" sug (as per sample), g.i. corogated sheet 10x3x24sug (as per sample), m.s. angle 2.5x2.5x0.25 (as per sample), m.s. angle 2x2x0.25 (as per sample), m.s. angle 0.5x0.5x0.25 (as per sample), m.s. angle 0.25x0.25x0.25 (as per sample), m.s. angle 1x1x0.25 (as per sample), m.s. angle 1 x1 x " (as per sample), m.s. angle 1x1x " (as per sample), m.s. channel 4x1 x " (as per sample), m.s. channel 4x2x " (as per sample), m.s. channel 3x1 x " (as per sample), m.s. channel 3x1 x " (as per sample), m.s. flat iron 1x3 " (as per sample), m.s. flat iron 3x6 m.m. (as per sample), m.s. flat iron 4x6 m.m. (as per sample), m.s. flat iron 2 x6 m.m. (as per sample), m.s. flat iron 1 x5 m.m. (as per sample), m.s. flat iron 2x6 m.m. (as per sample), m.s. flat iron 1x6 m.m. (as per sample), m.s. flat iron x5 m.m. (as per sample), m.s. flat iron x " m.m. (as per sample), m.s. flat iron 1 x " m.m. (as per sample), m.s. flat iron 1x " m.m. (as per sample), m.s. flat iron x " m.m. (as per sample), m.s. flat iron 1 x " m.m. (as per sample), m.s. flat iron 2x3" m.m. (as per sample), m.s. flat iron 1 x " m.m. (as per sample), m.s. square ber 2" (as per sample), m.s. square ber 1 " (as per sample), m.s. square ber 1" (as per sample), m.s. square ber 1 " (as per sample), m.s. square ber " (as per sample), m.s. square pipe 1" (as per sample), m.s. square pipe 1 " (as per sample), m.s. square rod 1" plain (as per sample), m.s. square rod 1 " plain (as per sample), m.s. square rod " plain (as per sample), m.s. square rod 5/8" plain (as per sample), m.s. square rod " plain (as per sample), m.s. square rod " or 10m.m. plain (as per sample), m.s. bolt nut " x 5" (as per sample), m.s. bolt nut 5"x5/8" (as per sample), m.s. bolt nut 4"x5/8" (as per sample), m.s. bolt nut 3"x5/8" (as per sample), m.s. bolt nut 6"x " (as per sample), m.s. bolt nut 5"x " (as per sample), m.s. bolt nut 4"x " (as per sample), m.s. bolt nut 3"x " (as per sample), m.s. bolt nut 2 "x " (as per sample), m.s. bolt nut 2"x " (as per sample), m.s. bolt nut 1 "x " (as per sample), m.s. bolt nut 1"x " (as per sample), m.s. bolt nut 3"x " (as per sample), m.s. bolt nut 2 "x " (as per sample), m.s. bolt nut 2"x " (as per sample), m.s. bolt nut 1 "x " (as per sample), m.s. bolt nut 1"x " (as per sample), g.i. bolt nut 3"x " (as per sample), g.i. bolt nut 2 "x " (as per sample), g.i. bolt nut 2"x " (as per sample), g.i. bolt nut 1 "x " (as per sample), g.i. bolt nut 1"x " (as per sample), g.i. bolt nut "x " (as per sample), m.s. washer 1" (as per sample), m.s. washer " (as per sample), m.s. washer 5/8" (as per sample), m.s. washer " (as per sample), m.s. washer " (as per sample), m.s. washer " (as per sample), m.s. washer " (as per sample), m.s. washer " (as per sample), m.s. welding rod 2 mm (as per sample), brass rod 3mm (as per sample), sal wood 12x6"x1" (malaysia), sal wood 10x6"x1" (malaysia), sal wood 10x12"x1" (malaysia), sal wood 12x12"x1" (malaysia), steam coal (asian pain), paint blue (asian pain), paint black (asian pain), paint yellow (asian pain), paint red (asian pain), paint bas green (asian pain), paint white (asian pain), muras chasis red (asian pain), red oxide (asian pain), putty, bombay paste, spirit, cotton waste, old cloth (local), kerosine oil (local), tarpin oil (1 ltr bottle), thinner oil (one litter bottle), wire brass 12", hair brass 2" to 3", hair small tuli 2 to 10 no (camel), grease 500gm container, mobile oil (servo), wire nel 4"-3"-2",

CTN :39370150

03 Apr, 2025 NA

Kargil - Jammu And Kashmir

Tender For corrigendum : supply of mine trapping fence - ms angle iron fencing post , ms flat iron , 3mm dia chain link fencing , nut 50mm long 10mm dia and bolts with double washer , round bar of 6mm dia

Structural Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government