Latest structural material Tenders | Government structural material Tenders

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

Central Government/Public Sector

CTN :39605744

29 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of constuction, fabrication, installation and setting up of pradhan mantri jan aushadhi kendra (pmbjks) at ujjain railway station (circulating area) as per drawing & details attached of nid, adi , furniture steel. 12 compartment steel cloth locker h 2000 mm x w 910 mm x d 550 mm, material: ms sheet conforming to commercial quantity cr-1, grade 340 of is 513:2008, sheet thickness: 0.8 mm. make neeman or similar , central table rectangular shap with ss base and wooden top of size 4 x 2 x 1.5 (design, size, and brand to be approved by c.a.) , visitors chair cushioned pch-7003 godrej, dice, methodex.one sample to approved. , supply and installation of 304 grade stainless steel 4 seater bench, design and specification as per rdsos specification enclosed herewith( back rest with seat partition) drg rdso/wks/2018/2 dt 05.06.2018) bench should be installed at station, station and qty. at each station will be advised by this office , supply and installation of ss swing bin hdpe 40 litter capacity (one set of three colour black+ blue+green) with sticker with ss stand of 304 grade approximate weight 10.00 kg with fastener.a sample to be approved. , supply and fixing of wooden reception table with following specifications: width x height x depth: 1524 x1069 x1524mm, 18mm thick pre laminated novapon board with melamine finish. two storage units with locking facility, high-quality locking mechanism available with a duplicate key, frame type: free standing, shape: l shape,model: office reception make godrej ikea, zuari wipro durian, a sample and design to be approved. , bed side table spec of item teak wood modular drawer with locker brand nilkamal, cello, godrej interio, ikea, zuari, wipro supreme size 475mm*457mm*432mm with two storage one sample to be approved before supply. , metal bed, made of tubular steel ss 304 rectangular / sqaure section, size l 1900 mm (+10mm) x w 900 mm (+10mm), structure of metal bed frame including legs and head. structure ss 304 pipe, thickness of hollow section in structure 1.3, material of mattress panel plywood sheet/ ss pipe, thickness of mattress panel 1.2 mm, height of bed 450 mm, paint/finish of m s parts powder coating, finish of head board powder coating, min powder/paint coating thickness (micron) = 60 micron , bath room set9 1)pvc bucket 20 l=01 ??. (2)pvc mug 1 l=01 no. (3) pvc patla stool 1x1 01 no. (4)s 5 soap case 01 no. (5) cloth hanger 01 no. (6) bath mirror pvc frame #01 no. (7) pvc d*bin 9 lit. 01 one sample to be approved. , teak wood make glass top centre table. size:-width-48 x depth-24 x height-18". a sample to be approved before supply. , double bed mattresses skin sens ultra gold fabric acro sleep memory foam size 6 x 6.5 x 6 godrej, springfir, sleepwell or kurlon or better , almirah steel small 1980x920x480 mmitem code: 781520831142 item type: supply item description: almirah steel shelving cabinate mild steel sheet confirming to grade hri of is: 1079-2009 size 1980x920x480 mm with proper lock and key , office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5x2.5x2.5 make jalaram, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca , supply of wooden luggage rake made of 3 layer pre laminated particle board with aluminum/steel in lay on top smooth movement of luggage for waiting and retiring room (design, size and brand to be approved by c.a. , bathroom sets(1) pvc bucket 20 ltr. 01 no. (2) pvc mug 1 ltr. 01 no. (3) pvc stool (patla) 01 no. (4) pvc soap case 01 no. (5) cioth hanger 01 no. (6) bath mirror pvc frame 01 no. (7) pvc dust bin 9 ltr. 01 no. one set of sample to be approved by c.a. , supply and installation of superior quality eyelet curtain with ss rod and bracket set and all fitting arrangement for doors and windows. curtains panna 48 inch quality, design and brand to be approved by ca before supply , wall panelling of louvers with profile light & customized wallpaper on wall. make - abm or as simil

CTN :39357296

11 Mar, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : construction of structure - profile sheet size 10x16 , profile sheet size 16 x 15 , base size 16 x 15 base height 1 feet , base size 16 x 10 , three side wall size 6 x 16 two side wall 10x6 with material and labour charge , plumber work with material and labour charge

CTN :38910520

11 Mar, 2025 84.16 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-5364 work of the application of air seal for sealing of penthouse and other boiler area with material and fabrication of permanent structure of pipes for work of mechanized evacuation of ash from penthouse, dog house, cat house

State Government

CTN :39586255

12 Mar, 2025 NA

Kolkata - West Bengal

Tender For supply of 3 buckets mop trolley (trolley material - heavy duty plastic, bucket capacity - 60 ltr (each 20 ltr), structure - open top, color - red / yellow / blue, down press wringer - down press 100% made in india wringer, with 4 heavy duty wheels

State Government

CTN :38601213

08 Mar, 2025 NA

Talwara - Jammu And Kashmir

Tender For bid to ras supply of stage lighting of matrika auditorium - sitc of high performance led beam projector fixture , sitc of led ubpl fixture , sitc of led light source features 400w 36v inbuilt smps , sitc of pc wing controller , sitc of the dmx data repeater operates on a voltage range of 100 to 220v , sitc of fixture equipped with a 200w original , sitc of product featuring a flicker free led lamp , sitc of product powered by a 400w led light engine , sitc of lighting fixture which supports multiple control modes , sitc of high quality dimming out junction box 1 way , sitc of high quality power junction box 1 way , sitc of 2 core cable with sheathed housing , sitc of frls copper unarmored flexible cable , sitc of desktop computer , sitc of suspender cum clamps , sitc of dmx male female connectors 3 pin gland , sitc of 48 way power marshaling box sitc of high-performance led beam projector fixture capable of producing a precise and bright color range suitable for dynamic lighting applications. optics: lens angle: 25 degrees, providing a versatile light spread for various lighting needs. holder: size 20x15mm, color black. surface type: bead surface with concave frosted finish. control & performance: dmx channels: 8 dmx channels with 8-bit color mix mode for customizable control over color and effects. voltage: operates within a range of 100-220v at 50/60hz. power: total wattage of 140w, with maximum power consumption capped at 200w with a smps of 26 volt 3.2 amp current. red wattage - 21.6watt, green wattage - 45watt, blue wattage - 40 watt, white wattage - 39watt with total of 1 ampere of current. housing and finish: material: durable cast aluminum. color: black powder-coated for a sleek finish. ip rating: ip65, suitable for outdoor environments. along with ip65 power and dmx connectors bid number/ ( ( ) ) : gem/2024/b/5711214 dated/ * : 16-12-2024 bid document/ 2 2 1 / 27 suitable for any weather conditions certifications and compliance: ce, iso, and rohs certifications for safety and reliability. weight: >5.0 kg, making it portable and easy to install. make in india certification to be provided. installation and requirements: the supplier is responsible for complete installation and commissioning, ensuring integration with existing systems. operational training to be provided to designated personnel. submission of a product datasheet is required. required 3 years warranty., sitc of led ubpl fixture which operates on an ac voltage range of 100-240v 200watt and 1.240 ampere current and a inbuilt smps of 200w 36volt and 5.3amp of current which offers luminous options of reputed brand lm-80 certified led with chromaticity of a warm incandescent bulb. colour temperature cri & tlci values equivalent or greater than 90 designed for efficiency lux@5 meters is above 4500 at 26 degrees, total power is 300w. power interface: power connector input / output. signal interface: three-core dmx signal input / output. advanced optical systems ensure clear imaging quality. control panel: lcd panel + 4 buttons. it performs well in environments with ambient temperatures below 40 c and maintains a maximum surface temperature of 85 c. the light has a net weight of > 8.0 kg and a gross weight of > 10.0 kg, flicker-free, thanks to pwm frequency adjustment, up to 25 f./sec. 4 blades manual framing system, dmx monitoring. remote access through rdm. aluminum structure body. beam angle options of 26 for versatile lighting effects. outstanding strobe effect, with adjustable speed. no flashing under the hd camera. heat dissipation mode: air cooling. intelligent fan speed regulation: the fan will not work when the lamp is not lit. the fan will change with the temperature change, thus reducing the noise of the fan and creating a good performance environment. maximum tolerable ambient temperature: 40 c. maximum tolerable surface temperature: 65 c. minimum acceptable working temperature: -5 c. it is dmx512 controlled and measures 340 x 270 x 650 mm, ma

State Government

CTN :39578256

24 Mar, 2025 4.50 Lacs

Birsinghpur - Madhya Pradesh

Tender For procurement of painting material work of external surface painting of ldo tank ph iii structure directly welded connected to tank at sgtps mppgcl birsinghpur

Private Sector

CTN :39553867

12 Mar, 2025 NA

Patan - Gujarat

Tender For auction of cyclone damaged pv modules approx. 698 numbers & mms structure material of approx. 18 mt

CTN :39563339

11 Mar, 2025 7.60 Lacs

Trivandrum - Kerala

Tender For purchase of items for radiotherapy department - vacloc cushion,1. full body cushion, head and neck, breast and thorax, hip and pelvis.2. rectangle and square type.3. nylon/urethane material with indexingless beam attenuation.4. indexable.5. reusable., vacloc cushion motor and accessories,1. single function or two functions to create vacuum and to inflate back.2. vacloc storage rack.3. cushion manager to adjust the cushion while cushion forming., bolus sheet 5mm,1. made of tissue equivalent material.2. thickness - 5mm3. flexible material4. conformity to body structure, immobilization shell - 3point,. 3 point mask with nose hole2. easy to mould3. non sticky4. reproducible5. should be compatible with the orbit baseplate (l-clamp)6. should have a thickness in range of 2mm-2.8mm7. number of fixation points (clamps) required the edges of the thermoplastic sheets should be smooth without any perforations.8. the thermoplastic sheets should be non sticky to the patient surface or to itself during the moulding process.9. the clamps should be provided with holders for ease of fixation and removal from the baseplate

CTN :39558011

24 Mar, 2025 39.00 Lacs

Multi City - Karnataka

Tender For construction of proposed 4tpd mrf centre (material recovery facility) of peb structure (primary & secondary shed) at sy no.111 in ramasagara, tmc chandapura limits

Structural Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

Private Sector