Latest structural angle Tenders | Government structural angle Tenders

Central Government And Public Sector

CTN :39832460

16 Apr, 2025 34.90 Lacs

Agra - Uttar Pradesh

Tender For repairs to excavated remains in outer side of mint areas at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), random rubble masonry with hard stone in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including t & p, material, scaffolding etc complete. (rate including g.s.t.), providing coursed rubble pathway with hard stone with :cement mortar 1:6 (1 cement : 6 coarse sand) inluding supply of all materials labour t&p etc. required for proper completion of work. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6)mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), providing and fixing of r.s. joist (175x85x5.80)mm for hanging of m.s. gate including priming at diwan-e-am, fatehpur sikri, agra. (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), pointing on stone masonry with cement mortar (1 cement, 3 c.sand) mixing with coloring pigment, t & p, scaffolding etc complete. (rate including g.s.t.), steel work in built up tubular trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. electric resistance or induction butt welded tubes. (rate including g.s.t.), painting with synthetic enamel paint of approved brand and manufacture of required colour :two or more coats on new work. (rate including g.s.t.), red sand stone 75mm thick top fixing in m.s. iron frame/ pathway fine dressed on all exposed surface in required pattern and all material labour t&p etc. required for porper completion of work. (rate including g.s.t.), disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to outside of municipal limits for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. (rate including g.s.t.), providing and fixing of red sand stone benches having 4 legs of size (0.25x0.25x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (rate including g.s.t.), hiring charges of electric / diesel mixer grinder for mortar with operator and fuel etc. co

CTN :38520343

28 Mar, 2025 NA

Ganjam - Odisha

Tender For bid to ras provision of security wall withdouble swan neck angle iron post with concertina coil & chainlink fence for mrsam & akash weapon system complex in army ad college at gopalpur military station out ofsecurity related equipment for the fy 2024-25

CTN :39824377

05 Apr, 2025 NA

Taranagar - Rajasthan

Tender For wsp ??????? ????? ???? ??. 921 ????? - , , 1.5 , , , , , : 50 , , , 1 1.5 (lift) , - 1:6 1:8 , , 112 75 - 1:6 75 , 1:6 - 14 20mm, supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size.f r521, 110 . . . , 3 (to give even shade) / water proofing cement paint, add for display board

State Government

CTN :39789770

31 Mar, 2025 NA

Kurung Kumey - Arunachal Pradesh

Tender For supply of material under mgnrega 2025-26, tali - spade standard size, shovel, square , best quality, red shuttering plywood ( 8 x 4 feets) 12mm thickness, 25kg, hammer 250 gram, hammer 2kg, hammer 5kg, iron nails (1, 2,3,4,5 & 6 inches), craw bar (killi bari), 30mm, tarpauline sheets (12'x15'), tarpauline sheets (15'x18'), g.i. tagari (capacity 4kg) (8mm), korni (big size), rubber boots, rain coat (standard size), plastic water pipe (30mtr, 20mm), (coil), aluminium buckets (10 ltrs), plastic mug (0.50ltrs), water filter (10 ltrs), aqua guard, dao ( local product), mesh wire (5 x 50 mm) per mtr, barbed wire, made of g.i. wire of 12 gx 2 ply x 4 points at 4 inches apart without wooden bobbins, light weight bricks 24x8x4 inch, chain link fencing height 1mtrs (sq/mtr), hand saw (wood cutter) standard size, angle iron post (50mm x 50mm x6mm thickness (or 2"x2"x 6"mm) of 2.7mtrs length/height, cgi sheets 0.34mm (10 feet), pvc pipe 4.3 inch (110mm dia) ashirvad, binding wire roll, working gloves standard size, pair, cement (grade-53) dalmiya, stone aggregate 40mm size, per cum, hacksaw blade (450x32x1.6), pkt, ms rod 8mm dia, ms rod 10mm dia, ms rod 12mm dia, ms rod 16mm dia, ms rod 6mm dia

State Government

CTN :39789772

31 Mar, 2025 NA

Kurung Kumey - Arunachal Pradesh

Tender For supply of material under mgnrega 2025-26/03 - jampal 30mm (digging bar), spade standard size, shovel, square , best quality, red shuttering plywood ( 8 x 4 feets) 12mm thickness, 25kg, hammer 250 gram, hammer 2kg, hammer 5kg, iron nails (1, 2,3,4,5 & 6 inches), craw bar (killi bari), 30mm, tarpauline sheets (12'x15'), tarpauline sheets (15'x18'), g.i. tagari (capacity 4kg) (8mm), korni (big size), rubber boots, rain coat (standard size), plastic water pipe (30mtr, 20mm), (coil), aluminium buckets (10 ltrs), plastic mug (0.50ltrs), water filter (10 ltrs), aqua guard, dao ( local product), mesh wire (5 x 50 mm) per mtr, barbed wire, made of g.i. wire of 12 gx 2 ply x 4 points at 4 inches apart without wooden bobbins, light weight bricks 24x8x4 inch, chain link fencing height 1mtrs (sq/mtr), hand saw (wood cutter) standard size, angle iron post (50mm x 50mm x6mm thickness (or 2"x2"x 6"mm) of 2.7mtrs length/height, cgi sheets 0.34mm (10 feet), pvc pipe 4.3 inch (110mm dia) ashirvad, binding wire roll, working gloves standard size, pair, cement (grade-53) dalmiya, stone aggregate 40mm size, per cum, hacksaw blade (450x32x1.6), pkt, ms rod 8mm dia, ms rod 10mm dia, ms rod 12mm dia, ms rod 16mm dia, gi pipes 25mm, 6mtr, galvanized iron channel 6 mtr (5 inch x 3inch) per piece

State Government

CTN :39789773

31 Mar, 2025 NA

Kurung Kumey - Arunachal Pradesh

Tender For supply of material under mgnrega 2025-26, gangte - jampal 30mm (digging bar), spade standard size, shovel, square , best quality, hammer 250 gram, hammer 2kg, hammer 5kg, g.i. tagari (capacity 4kg) (8mm), korni (big size), rubber boots, rain coat (standard size), aluminium buckets (10 ltrs), plastic mug (0.50ltrs), dao ( local product), barbed wire, made of g.i. wire of 12 gx 2 ply x 4 points at 4 inches apart without wooden bobbins, light weight bricks 24x8x4 inch, chain link fencing height 1mtrs (sq/mtr), hand saw (wood cutter) standard size, angle iron post (50mm x 50mm x6mm thickness (or 2"x2"x 6"mm) of 2.7mtrs length/height, cgi sheets 0.34mm (10 feet), binding wire roll, cement (grade-53) dalmiya, plastic bucket 10 to 15 ltrs, nail, pick axe (standard size), first aid kits, face mask 3ply pack of 50, tarpaulin(15x18), ms rod 6mm, ms rod 8mm, ms rod 10mm, ms rod 12mm, gi pipes 20mm nominal bore, gunny bag, coconut rope

State Government

CTN :39789774

31 Mar, 2025 NA

Kurung Kumey - Arunachal Pradesh

Tender For supply of material under mgnregif2o25.26 - jampal 30mm (digging bar), spade standard size, shovel, square , best quality, red shuttering plywood ( 8 x 4 feets) 12mm thickness, 25kg, hammer 250 gram, hammer 2kg, hammer 5kg, iron nails (1, 2,3,4,5 & 6 inches), first aid kits, tarpauline (15'x18'), g.i. tagari (capacity 4kg) (8mm), korni (big size), rubber boots, rain coat (standard size), plastic water pipe (30mtr, 20mm), (coil), aluminium buckets (10 ltrs), plastic mug (0.50ltrs), water filter (10 ltrs), aqua guard, dao ( local product) pcs, water syntex (200 ltr), barbed wire, made of g.i. wire of 12 gx 2 ply x 4 points at 4 inches apart without wooden bobbins, axe, chain link fencing height 1mtrs (sq/mtr), hand saw (wood cutter) standard size, angle iron post (50mm x 50mm x6mm thickness (or 2"x2"x 6"mm) of 2.7mtrs length/height, cgi sheets 0.34mm (10 feet), binding wire( roll), working gloves standard size, pair, cement (grade-53) dalmiya, ms rod 8mm dia (ton), ms rod 10mm dia (ton), ms rod 6mm dia (ton), gi pipe 20 mm nominal bore

Trust

CTN :39770533

02 Apr, 2025 4.00 Lacs

Srinagar - Jammu And Kashmir

Tender For agronet fencing- supply, fixing pre yatra and dismantling, safe storage post yatra, barbed wire fencing- fixing of angle iron posts to pedestal and fixing of barbed wire fencing (7 horizontal rows and 2 cross) pre yatra and dismantling and

CTN :39720952

27 Mar, 2025 15.00 Lacs

Kapasan - Rajasthan

Tender For work of road furniture as per requirement in municipal area kapasan. (annual contract) - providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 3 metre long and size 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., 60 cm equilateral triangle, 80 mm x 60 mm rectangular, 60 cm x 45 cm rectangular, providing and erecting direction and place identification retro-reflectorised sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick framed to angle iron 40x40x5mm with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., providing and erecting direction and place identification retro- reflectorised sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting 2 mm thick framed to angle iron 40x40x5mm with area exceeding 0.9 sqm supported on two nos mild steel angle iron post 75 mm x 75 mm x 6 mm, firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., supplying and fixing glow studs of size 100 x 20 mm made of heavy duty body shall be moulded asa (acrylic styrene acrylortrite) of abs having electronically welded micro prismatic lens with abrasion resistant coating as approved by engineer- in-charge. the glow stud shall support a load of 13635 kg. tested in accordance with astm d4280. the slope of retro-reflective surface shall be 35+/ -5 degree to base. the panels on both sides with at least 12 cm of reflective areas up each side. the luminance intensity should be as per the specification and shall be tested as described in astm 1: 809 as recommended in bs : 873 part 4 : 1973 as per approved sample & manufactures by the engineer-in-charge., providing and fixing l type bollard 135cm height made out of 1.25mm thick m.s. sheet welded in conical section having upper dia 15cm and lower dia 20cm with another attachment of 150x150x7mm thick plate and hold fast at bottom, whole body is painted in white stove enamel and red reflective 3 band, each of 7.5cm and one reflective sheet of 15cm dia provided to it complete in all respect including all material, labour, diversion., providing and fixing swiss type hazard marker made out of 2mm thick m.s. sheet size of box is 15x15cm with hold fast at bottom whole body is painted in white stoving enamel paint with white/ high intensity grade prismatic type sheeting on all four side complete in all respect including all material, labour, and diversion., solar raised pavement markerssupply & installation of solar raised pavement markers made of polycarbonate molded body with circular shape, solar powered, led self illumination in active mode, 360 degre

CTN :39370150

26 Mar, 2025 NA

Kargil - Jammu And Kashmir

Tender For corrigendum : supply of mine trapping fence - ms angle iron fencing post , ms flat iron , 3mm dia chain link fencing , nut 50mm long 10mm dia and bolts with double washer , round bar of 6mm dia

Structural Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

State Government

State Government

Trust