Latest structural concrete work Tenders | Government structural concrete work Tenders

State Government

CTN :42881023

01 Dec, 2025 14.08 Lacs

Delhi - Delhi

Tender For providing and installation of open gym equipments at dada maldev stadium, dariyapurkalan under dilligramodhyaabhiyaan (dga). - excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (a) all kinds of soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-iii) : 10 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)., providing and laying 60mm thick faciory made cement concrete interlocking paver block of m -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge., providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of engineer-in-charge (length of finished kerb edging shall be measured for payment). (precast c.c. kerb stone shall be approved by engineer-in-charge)., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.(a) all kinds of soil, providing and installation of air walker / health walker of size 1070x615x1509mm fabricated with main post of 114mm c class g.i. pipe made of hot roller tubular steel and hot dipped galvanized and powder welded coated using akzo nobel of 60-80 micron thick., providing and installation of double sit-up station with below specifications:- dimensions (lxwxh): 1500x1150x650mm, fabricated with main post of nb 50mm (g.i) c class pipe of approved make. main frame of nb 32mm (g.i) c class pipe, leg support of nb 65mm (g.i) c class pipe ( nb stands for nominal bore i.e., internal diameter of pipe in millimeters) fixed on its top is back support made of perforated ms sheet of 2mm thickness. all pipes are powder coated using akzo nobel or equivalent point of 80-120micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint is applied at all the welding points prior to finishing., providing and installation of surf board/air swing of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and c class g.i. pipe as per is-1239 and rest of the pipe 40mm dia c class g.i. pipe as per is-1239 and powder coated using akzo nobel or equivalent of 60-80 micron thick., providing and installation of horse rider station with below specifications:- dimensions: 1000x600x1100mm. fabricated with main post of nb 100mm (g.i) c class pipe of approved make. main frame of nb 65mm (g.i) c class pipe. handle support frame of nb 50mm (g.i) c class pipe. ( nb stands for nominal bore i.e., internal diameter of pipe in millimeters). all pipes are powder coated with 80-120 micron thick akzo nobel or equivalent paints. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint is applied at all the welding points pr

State Government

CTN :42868405

01 Dec, 2025 1.27 Lacs

Pondicherry - Pondicherry

Tender For supply of material for the work of construction of cow shed for i.saraswathy, w/o iyyanar joc card no807 at karikalampakkam village panchayat in nettapakkam commune of ariyankuppam block, puducherry. - supply of fine sand (zone iv), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of vibrator ( needle type 40mm), supply of portland cement, supply of stone aggregate (single size) : 20mm nominal size, supply of coarse sand (zone iii), supply of stone aggregate : 40mm nominal size, supply of common burnt clay f.p.s (non modular) brick class designation 7.5, supply of wall form panel 1250x500mm, supply of 100mm channel shoulder 2.05m long, supply of twisted steel / deformed bars, supply of stone aggregate (single size) : 100mm nominal size, supply of gravel, supply of coarse sand (zone iii), hire charges of weilding by electric plant, supply of mild steel tubes hot finished welded type, supply of precoated glavanished iron profile sheet 0.50 mm tct, supply of galvanised steel j or l hooks 8 mm dia, supply of stone aggregate (single size) : 20mm nominal size, supply of stone aggregate (single size) : 10mm nominal size, supply of synthetic enamel paint in black or chocolate shade, providing one number of citizen information board of size 0.90 x 1.20m for community work as per the standard drawing of mord. mgnrega (r.c.c. precast)

State Government

CTN :42868406

01 Dec, 2025 3.35 Lacs

Pondicherry - Pondicherry

Tender For supply of material for the work of construction of fish drying yard for community in panithittu village panchayat in bahour commune of ariyankuppam block puducherry - hire and running charge of loader, hire charges of hydraulic excavator (3d) with driver and fuel, (psr code no.0983 pdy) fine sand (zone iv), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of vibrator ( needle type 40mm), supply of portland cement, (psr code no0295 pdy) supply of stone aggregate (single size) : 20mm nominal size, (psr code no.0982 pdy) supply of coarse sand (zone iii), (psr code no.0293 pdy)supply of stone aggregate : 40mm nominal size, (psr code no.0810a pdy)supply of gravel, (psr code no.0297 pdy) supply of stone aggregate (single size) : 100 mm nominal size, hire charges of wall form panel 1250 x 500 mm for centering, hire charges of corner angle 45 x 45 x 5 mm 1.50 m long for centering, hire charges of 100 mm channel shoulder 2.5 m long for centering, hire charges of double clip (bridge clip) for centering, hire charges of single clip for centering, hire charges of m.s tube 40 mm dia for centering, supply of common burnt clay f.p.s (non modular) brick class designation 3.5, supply of deharadun white lime, supply of bitumen hot sealing compound grade a, supply of flame relardant face inslulating, impregnated fibre board 12 mm thick, providing one number of citizen information board of size 0.90 x 1.20m for community work as per the standard drawing of mord. mgnrega (r.c.c. precast), supply of twisted steel / deformed bars

State Government

CTN :42903781

15 Dec, 2025 4.21 Crore

Salem - Tamil Nadu

Tender For cc road work for the year 2024 25 sh upgrading the existing internal bituminous road with cement concrete road at fsd salem recall

State Government

CTN :42903795

15 Dec, 2025 10.55 Crore

Coimbatore - Tamil Nadu

Tender For cc road work for the year 2024 25 providing and upgrading the existing internal bituminous road with cement concrete road at fsd north coimbatore recall

State Government

CTN :42901805

15 Dec, 2025 6.50 Crore

Chennai - Tamil Nadu

Tender For cc road work for the year 2024 2025 at fsd egmore sh providing cement concrete road all around the godown complex left over portion recall

State Government

CTN :42903823

15 Dec, 2025 1.18 Crore

Ramanathapuram - Tamil Nadu

Tender For cc road work for the year 2024 2025 at fsd ramanathapuram sh construction of cement concrete road all around godown complex left over portion recall

State Government

CTN :42903847

15 Dec, 2025 1.61 Crore

Karaikal - Pondicherry

Tender For cc road work for the year 2024 2025 at fsd karaikkal sh providing cement concrete road all around godown complex left over portion recall

corporations/Associations/Others

CTN :42485358

03 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of center

corporations/Associations/Others

CTN :42485371

03 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of center

Structural Concrete Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors