Latest submersible electric motor Tenders | Government submersible electric motor Tenders

State Government

CTN :39661980

20 Mar, 2025 72.39 Lacs

Bharatpur - Rajasthan

Tender For -submersible pump set with wires (various sizes), monoblock pump set (various sizes) with wires, m.s. scrap, starter various sizes, feeder panel board, single phase mud pump 3 h.p, sodium hypo chloriting dozer pump with panel complete, electric scrap, old electric (submersible) cable, tools scrap, gauge scrap, wireless scrap, wooden scrap, burnt copper wire scrap, c.i. scrap, g.i. scrap, g.m. scrap, centrifugal motor pump set, diesel engine etc.

CTN :39649227

25 Mar, 2025 10.00 Lacs

Balotara - Rajasthan

Tender For supply, installation, testing and commissioning of various electric item on annual rate contract - supply of din rail mounting contactor and accessories confirming to iec 61095 with following description and configuration in existing distribution board / sheet including making connections, testing etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr modular contactor 40a - 3no, supply of wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor as required. for additional technical parameters of product / work refer annexure a attached with this bsr4.0 sq.mm, 6.0 sq.mm, 10.0 sq.mm, supply of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 mperes including making connection, programming conforming to iec 0730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer exure "a" attached with this bsr.one day & week reserve (analog type ), one day & week reserve (digital type ), supply of 240/415 v ac mcb with positive isolation of 10 ka breaking capacity (b/ c/d tripping characteristic as per type of load and site requirement) 4 kv impulse withstand voltage, isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80 a & above rating including making onnections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr. single pole mcb (with b/c curve tripping characteristics) 0.5 a to 5 a rating, 6 a to 32 a rating, 40 a rating, 63 a rating, providing & fixing of 240/415 v isolator isi marked is:13947- iii/conforming to iec 60947-3, suitable for ac22a utilization category, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering overall poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. ip 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr. double pole isolator 30 a / 40 a rating, 63 a rating, triple pole isolator 40 a rating, 63 a rating, sitc of single stage, water cooled, high speed (2880 rpm), horizontal, centrifugal, openwell submersible pumps set pre filled with coolent water and fitted with mechanical seal - t/c vs t/c, thrust bearing shall be of carbon + s.s.the stator body of single phase pump shall be of ss and rest of all shall be of cast iron. all casting parts should be cathod electro deposition (ced) coated and other construction material should be confirming to is : 14220: 2018 . the overall performance of pump shall confirm to bee energy efficiency level of 3 star. valid bee certificate from oem must be submitted for the same. motor should be ie2 class as per iec 60034-2-1: 2007, iec 60034-30: 2008, & is12615:2011, including making connection etc as required complete in all respect. oem shall have submit nabl / cpri / erda accrediated lab type test certificate before executio

CTN :39675500

18 Mar, 2025 3.00 Lacs

Baran - Rajasthan

Tender For digging of tubewell and installation of pipes and purchasing of colum pipes and submersible motor, electric cable, starter and other accessories

CTN :39675504

18 Mar, 2025 3.00 Lacs

Baran - Rajasthan

Tender For digging of tubewell and installation of pipes and purchasing of colum pipes and submersible motor, electric cable, starter and other accessories

State Government

CTN :39632295

17 Mar, 2025 8.00 Lacs

Karauli - Rajasthan

Tender For vidhut samagri and marramat kary - bulb 100 from isi marka , bulb 60 watt isi marka , tube light road 40 watt isi marka , tube light road 20 watt isi marka , tube light chowk 40 watt electronic isi marka , tube light chowk 20 watt electronic isi marka , starter (tl) isi mark , wire 1.0 mm copper isi marka , wire 1.5mm copper isi marka , wire 2.5mm copper isi marka , filexeval wire 23/76 isi marka , tube light complete (led) 20 watt isi , so , room heater road isi marka , roop heater isi marka , iron convector isi marka , angle holder isi marka , the pin top 16 am isi marka , shree pin top 6 a.m. isi marka , condenser 2.5 mfd isi marka , condenser 4.0 mfd isi marka , taprol isi marka , switch 6 amp isi marka , regulator 6 anp (socket size) isi marka , a.c. shree pin top isi marka , holder isi marka , mcb 10 amp isi marka , mcb 15 amp isi marka , mcb 20 amp isi marka , mcb 32 amp isi marka , two pin isi marka , taperol pvc 0.75" isi marka , stedizer elinent 1.5 k.w. isi marka , elinent autoclave 2 k.w. own brand , autoclave elinent 3 k.w. own brand , cooler blade isi brand , capiciter 3.15 mfd isi brand , capiciter 4 mfd isi brand , cooler lead three core isi marka , cooler grill 18" isi brand , bearing 6200 isi mark , bearing 6201 isi mark , bearing 6202 isi mark , bearing 6203 isi mark , nail 1 mm isi marka , nail 1.5 mm isi marka , nail 2 mm isi marka , switch 15 amp isi marka , thi pin socket 16 am isi marka , thi pin top 5 amp isi marka , thi pin top 15 amp isi marka , service wire 6 mm isi mark , service line aluminium 8 amp isi marka , flexible wire (double wire) isi marka , tube light road holder isi marka , mcv 32 am isi marka , mcv 40 am isi marka , mcv 63 am isi marka , plastic gulli isi marka , scoop pone inch isi marka , screw one inch isi marka , screw 2.5 inch isi marka , cooler pump submersible 3 foot isi marka , cooler pump submersible 6 foot isi marka , cooler motor isi marka , electric bell isi marka , cooler grass tree 20 inch isi marka , cooler grass tree 24 inch isi marka , cooler fan 20 inch isi marka , cooler pandi 24 inch isi marka , ceiling fan 42 inch polar isi marka , ceiling fan 42 inch khaitan isi marka , ceiling fan 42 inch orient isi marka , ceiling fan 42 inch comton company isi marka , sodium light bulb 70 watt isi marka , sodium light bulb 240 watt isi marka , polar in cooler complete 20 gauge wadi, isi marka kit, size 40"x27" , khaitan cooler complete 20 gauge wadi, isi marka kit, size 40"x27" , orient cooler complete 20 gauge wadi, isi marka kit, size 40"x27" , cooler complete 20 gauge wadi me comton company with isi marka kit, size 40"x27" , polar in cooler complete 20 gauge wadi, isi marka kit 26"x30" , khaitan cooler complete 20 gauge wadi isi marka kit 26"x30" , orient cooler complete 20 gauge wadi, isi , marka kit 26"x30" , cooler complete 20 gauge wadi me chromton company with isi mark kit 20"x30" , led bulb 5 watt isi marka , led bulb 7 watt isi marka , led bulb 9 watt isi marka , led bulb 12 watt isi marka , led bulb 14 watt isi marka , telephone wire isi marka , cfl 15 watt isi marka , cfl 18 watt isi marka , cfl 25 watt isi marka , cfl 45 watt isi marka , c.f.l 20 watt is1 marka , c.f.l 32 watt 181 marka , m.c.v 4 pole 63 ampere isi marka , c.f.l 10 watt is1 marka , ceiling fan repair work including dismantling and reinstallation , motor winding copper wire isi marka , condenser isi brand , bearing isi mark isi mark , service charge for repair work , grand total , repairing work of cooler including dismantling and reinstallation , motor winding copper wire plain motor isi marka , condenser isi brand , bush isi mark , bearing isi mark , shaft isi marka , service charge for repair work , , grand total , peg gas fan repair work including dismantling and reinstallation , motor winding copper wire 9 inch and isi marka 12 inch , condenser isi brand , bearing isi marka , petal isi marka , service charge for repair work , grand total , 4 inverter repairing work including dismantling and re

Central Government And Public Sector

CTN :39600913

15 Mar, 2025 1.44 Lacs

Meerut - Uttar Pradesh

Tender For replacement of various electrical accessories and minor addition / alteration in e.i work at various locations in oa meerut. - supplying and drawing following size of frls pvc insulated copper conductor, single core cable in the existing surface/recessed steel / pvc conduit etc as required. (a) 2 x 1.5 sq. mm, 1 sq. mm twin core flat flexible cable, supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate i/c making connection etc. as required. (a) 5/6 amp switch, 15/16 amp switch, 3 pin 5/6 amp socket outlet, 6 pin 15/16 amp socket outlet, 6 way pvc gang box, supplying and fixing of following size / modules, gi box alongwith modular base and cover plate for modular switches in recess etc complete as reqd. (a) 8 module (125mm x 125mm), 6 module (200mm x 75mm), 4 module (125mm x 75mm), supplying & fixing of follwing piano type switch & sockets in place of faulty components in existing switch board , power points i/c connections etc as required. (a) 5/6 amp single way switch, 3pin 5/6 amp socket outlet, 15/16 amp switch, 6pin 15/16 amp socket outlet, supplying & fixing of following led lights complete with all accessories i/c connection etc. as required. (m/s philips / crompton / havells & ss make) (a) 20 watt led round focus light, 24 watt led round focus light, 30 watt led street light, 50 watt led flood light, 10 watt 300 mm led batten, 2 x 2 led panel, supply and fixing of tower type room heater having dual carbon elements, provision of oscillatig type operation, two heat settings 600 w/1200 w, rotary switch conrol,tip over safety switch, thermal fuse for extra safety, high thermal efficiency suitabe for operation on 230 volts, 50 hz. single phase ac supply i/c connection, testing etc. complete as requred. ( m/s warmex make model no. rapid or ss make), supply and fixing of sun type room heater having all standard accessories and switches as required., sitc of submersible pump motor set capable of discharging 400-150 lpm of a head range of 23 - 70 mtr the pump shall be multistage of 5.0 hp totally enclosed submersible motor on common shaft suitable for operation on three phase 415 volt 50hz ac supply complete with all accessories etc as reqd. the pump shall consist mechanically balanced stainless steel shaft suction chamber provided perforated strainer etc complete with all other accessories. the electric motor winding shall have a non aging water proof insulation resistant to chemical effect having high strength motor pump shaft supported in water lubricated bronze plain bearing bushes with special self aligning shaft assembly end cap etc complete as required. (model- cora18c/14g+uma 100, 3.7/22 ksb or ss make), supply and fixing of 5 way extension board - 5 universal socket + 5 switch, with indicator, on/offswitch and heavy duty cable complete as reqduired., supply and fixing of movable tv stand complete as required., supply and fixing of line diagram of ht/lt distribution at te bldg. shastri nagar complete as required., supply and fixing of cctv cabinet and repairing of cameras complete as requied., supply and fixing of hdmi cable complete as required., supply and fixing of 7 ah smf battery in existing ups of cctv system complete as required., supply and fixing of 1 x 1 mcf board woth suitable screws etc. for making good the cables laying in cgmt chamber and making all cables of internet and ethernet power supplies complet as required.

CTN :39321890

14 Mar, 2025 NA

Jalandhar - Punjab

Tender For corrigendum : supply of 5 star hi wall inverter split ac unit 1.5 ton , hot and cold hi wall split ac unit 1.5 ton , wall mounted voltage stablizer 5 kva , single pole and neutral enclosure with mcb 20 amp , sub main wiring system size of wire 4.0 sqmm frls , sub main wiring system size of wire 6.0 sqmm frls , mcb distribution box spn4 way , mcb distribution box spn 8 way , triple pole and neutral 4 way db double door , mcb sp of rating capacity 6 to 32amp , mcb spn of rating capacity 32amp , mcb spn of rating capacity 40 to 63 amp. , 415v 10ka b curve mcb of tpn fp 40 to 100 amp , xlpe insulated of size 25 sq mm 4 core , excavation in trenches not exc 1.5 mtr deep , returning filling in , removing excavated material , fine and clean river sand , fire bricks old size sub class b laid flat in trenches , gi pipe 50 mm bore light grade with fitting for cable protection , electric water heater storage 2 kw capacity 25 ltrs 5 star , sub main wiring system size of wire 2.5 sqmm frls , connection pipe of size 15 mm bore and 600 mm long , steel tubes of size 15mm medium grade , steel tubes of size 25mm , gun metal globe or gate valves 20mm , brick masonary valve pit , cutting existing ug water mains upto 150mm dia , bib taps copper alloy crutch or butterfly handle , ball valves 15mm dia high pressure of ptmt , point wiring with 1.5 sqmm , 5 amps switch socket combination 5 pin , wall mounted cabin fan 400 mm sweep , submersible pump set with motor complete 25hp cap , pvc insulated and sheathed submersible cable 3 core flat 10 sq mm , pointing wiring with 2.5 sqmm one 3 pin 15 amps switch socket outlet power point , pointing wiring with 2.5 sqmm one 3 pin 5 amps socket point on independent board , socket outlet 2 in 1 3 pin 5 and 15 amps flush type , switch 15 amps flush type , switch piano flush type single pole one way 5 amps , socket outlet 2 in 1 3 pin 5 amps flush type , crimping tools (q3) bid details/ 2 / 39

State Government

CTN :39555343

12 Mar, 2025 69.5 Thousand

Alwar - Rajasthan

Tender For necessary electric equipment required for two seprate hwc- double battery inverter with necessary electrical fittings and installation. , submersible motor , office table , medicine rack steel iron

State Government

CTN :39559103

11 Mar, 2025 69.5 Thousand

Alwar - Rajasthan

Tender For electric items such as double batter invertor and submersible motor ete required for two health wellness center being conducted under alwar rural area through mla lad programme with installation and transportation to related health centers.-, double battery inverter with required power - including fitting and installation, , submersible motor, , office table, , medicine rack steel iron,

State Government

CTN :39532068

21 Mar, 2025 12.43 Lacs

Jamnagar - Gujarat

Tender For supply electrical consumable items for emd-3 bop & lighting section. - crc-226 contact cleaner in 415 ml/300 gram spray bottle., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, test leads (probes) for digital multimeter, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, led torch, pvc twin wire 2.5mm sqr., flexible wire 2-core, 2.5 sqmm, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flat cable 3 corex4 sqmm with copper conductor for submersible motor, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, wolf make air blower, vernier caliper "mitutoyo" make,size- 0- 300 mm, screw driver (tester) taparia product no:818.special with neon bulb,generally confirming to is 5579-1985 grade - ii, yellow handle,, tester type screw driver (special with neon bulb) generally confirm to is-5579-1985, grade: ii, handle- yellow colour, taparia product code-813, overall length 130 mm, combination plier, insulated with thick c.a. sleeve with joint cutter, generally confirming to is 3650-1981, product no. 1621-8., double ended fix spanner sets contant-6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32mm(12 nos),product no:14 (b) dep12, double ended ring spanners sets, ,contents- 6x7 , 8x 9, 10x11, 12x13, 14x15. 16x17 , 18x19, 20x22 , 21x23, 24x27, 25x28, 30x32 mm., socket set 1/4 " square drive(sockets-4,4.5,5,5.5,6,7,8,10,11,12,13,141/4,t20,t25,t30,t40,accessories-a733,a743,a753,a773,a703,a715), allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, bolt cutter, taperia make, length- 300mm, product no-bc-12, hydraulic hand operated crimping tool capacity : 50 to 1000 sq mm with changable hexagonal dies sets ,suitable for cu / al cable, crimping tools, capacity: 6 mm2 to 50 mm2., digital clamp on meter lcd display with backlight, 3-3/4 digit., din rail mounting channels, mcb 3 phase,4 pole, 63 amp 440 v ac 50 hz 10 ka

Submersible Electric Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector

State Government

State Government

State Government