Get complete information related to latest Surge Suppressor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Surge Suppressor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Surge Suppressor Tenders.
Tender For supply of feeders-1&2 and bus coupler, power contactors, 3pole, 1000v ac, 50hz, suitable for 500 kva, 750v ac onload switching under ac-6a category at temperature of 70 degree c &coil voltage of 110v dc +25%-30% with surgesuppressor, 2no+2nc, as per rdso spec no. rdso/pe/spec/d/tl/0195-2019 (rev.-0) suitable for switch board cabinet for hog compliant lslrd coaches. accepted makes & models as per s.no.1 of bom of rdso specification mentioned in the above description : (i) abb af1250, (ii)l&t mvo 820, (iii) 3rt12766nf368ka0 of siemens (vide jdse (tl-ac systemdesign) / rdso lr. no. el/7.1.108/sbc/lslrd dt.08.11.23 attached for this modified model number) only. [ warranty period: 30 months after the date of delivery ]
Tender For supply of contactor for 60 kva transformer rated current: 95 a, rated voltage: 690 v ac, main pole: 4, aux. contact: 1no + 1nc, control voltage: 230 v ac (168 v ac - 300 v ac) means 230 v ac +/ 30% with surgesuppressor as per rdso l. no. 7.1.108/mssbc dt. 17.09.2021 sr. no. 36 (s1k44) suitable for switchboard cabinet of rdso spec. no. rdso/pe/spec/ac/0184 (rev.1) m/s. abb catalogue no. af116b-40 only. [ warranty period: 30 months after the date of delivery ]
Tender For supply of contactor for net 1 & 2, rated voltage: 1000v ac, rated kva-100 at rated voltage & 70 degree c and utilization category 6a. main pole: 4nos, auxiliary contact: 2no+2nc, control voltage: 415vac with surgesuppressor, make: schneider/abb/siemens/l & t only; confirming to rdso specification no. rdso/pe /spec/ac/0184- 2015 (rev.-1) [ warranty period: 30 months after the date of delivery ]
Tender For fabrication and supply of tubular lamp post made out of 3.5 meter length in that 2.9 meter above ground level, 100mm diameter c class hot dip galvanized pipe base plate of size 320mm x 320mm x10mm suitable top cover made of 3mm thick hot dip galvanized gi sheet,with necessary fixing of g.i trip l channel of size 50mmx50mmx6mm and fixing of led flood lights at 1 meter from ground level . suitable for fixing of 3 no s of led flood light fittings and suitable for fixing of 3 nos loop in loop out box . necessary drawing is enclosed. all relevant certificates should be submitted along with the supply. note:fixing of gi strip l channel subject to suitable to site and materials jindal ,tata pipes , surya roshni, apl apollo, nezone, zenith birla , bhushan steel , prakash surya,visakha steel, mkk metals, chetana stels or similar. [ warranty period: 30 months after the date of delivery ]
Tender For supply of k44 contactor for 60 kva transformer rated current: 200 a, rated voltage: 690v ac, main pole: 4, aux contact: 01no+1nc, control voltage: 230v ac (168 v ac-300 v ac means 230v ac +/-30%) with surgesuppressor. confirming to rdso specification no. rdso/pe/spec/ac/0184-2015 (rev. 0) or latest. make: abb (model no.- af140-40-00-13+ cal9-11), schneider ( model no.- lc1d1150046m5n +la4da2u), siemens ( model no.-3tk1042-0au0+ 3tk1930-0b or 3rt13556ap36) or c&s ( model no.- lc1fdp1154+ta1-dn11+la9-09980). firm should submit test report & certificate of authorization from oem [ warranty period: 30 months after the date of delivery ]
Tender For annual rate contract for supply of electrical goods for street light and other electrical work in visnagar nagarpalika - supplying of double walled corrugated pipes (dwc) of polyethylene (conforming to is 14930 ii )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable ((a)50 mm outer dia, supplying of xlpe (is:7098) (i)-88 isi armoured cable multistrand / solid aluminium conductor for 1.1 kv. to be laid on wall with necessary clampsor in existing trench / pipe of following size of cables (c) 4 core 10 sq. mm, supplying of xlpe(is:7098) (i)-88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size.(a) 2 core 2.5 sq. mm, supplying of xlpe(is:7098) (i)-88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. (b) 2 core 4 sq. mm, supplying of flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. (e) 1.50 sq.mm 3 core round pvc sheathed, supplying of flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. (h) 2.50 sq.mm 3 core round pvc sheathed, supplying single phase ccms, supplying three phase ccms, repairing of single phase ccms, repairing of three phase ccms, supplying approved make smc press moulded composite frp. loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip 5way(3pplusnpluse),din rail for mounting mob and hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts and washers suitable for erection on pole with cable clampsand earth bolt of following size of box.(b) 250mm x 200mm x 100mm [deep], supplying approved make digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240v plus 5., 16a with, floating contacts minimum switching setup time 1 minimum and lcd display. also comprised permanent on/off switching. programming switches and housed in fire proof thermoplastic enclosure and transparent cover erected as required with necessary connection erected as directed., supplying electrical insulation l.t. tape role with isi marked having nominal width 1.8 cms nominal length 8.0 mtr nominal thickness 0.125 mm and having self adhesive pvc, plyer 8" (taparia), tester (taparia), screw driver 12" (taparia), safety gloves 11kv, safety shoes, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (a) for 25 / 32 a rating, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (c) for 60 / 70 a rating, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (e) for 110 a rating, supplying miniature circuit breaker single pole 6a to 25a suitable to operate on 240 v a.c. system and having breaking capacity 10 ka to be erected in existing box. confirming to is 8828/1996 with isi mark cat.iii, supplying 240 v mcb double pole switch for lighting load (b curve) having 10 ka breaking capacity and confirms to is : 8828 in existing box having following capacity (a) 6 to 32 amp.cat.iii, supplying 240 v mcb double pole switch for lighting load (b curve) having 10 ka breaking capacity and confirms to is : 8828 in existing box having following capacity (b) 40 amp. cat.iii, supplying 415v mcb four pole switch for lighting load (b curve) having 10ka breaking capacity and confirms to is :8828 in existing box having following capacity (a) 6 to 32 amp. cat.iii, supplying 415v mcb four pole switch for lighting load (b curve) having 10ka breakin
Tender For supply of ioh replacement kit for single bottle vcb of m/s schneiger electric type 22cb, part 4 no. 5510750 consisting of 14 sub parts. (1) aoh replacement kit part no. 5510740, qty. 1 kit. (2) grommer for base plate, part no. 5380650, qty. 01 kit. (3) o ring 9between flanges), part no. 5510390, qty. 01 kit. (4) selon washer (for plug of cylinder), part no. 5510450, qty. 01 kit. (5) gasket for base plate, part no. 5510810, qty. 01 kit. (6) sealing strip for bottom cover, part no. 5510162, qty. 2.3 mtr. (7) damper assembly for cylinder, part no. 5540030, qty. 01 kit. (8) piston seal ring for relay valve piston, part no. 5570050, qty. 01 kit. (9) piston seal ring for main piston, part no. 5540023, qty. 01 kit. (10) filter clement, part no. 5510490, qty. 01kit. (11) molecular sieves for air dryer, part no. 5390090, qty. 04 kg. (12) surgesuppressor for magnet valve assembly, part no. 5350100, qty. 01 kit. (13) poppet valve for relay valve, part no.5150010, qty. 01 kit. (14) auxiliary contact unit (8-way), part no. 5203400, qty. 01 kit.
Tender For supply of contactor for net 1 & 2, rated voltage: 1000 v ac, rated kva 100 at rated voltage and 70 degrees c and utilization category 6 a, main pole 4, auxiliary contact: 2 no + 2 nc, control voltage: 415 v ac with surgesuppressor with open type connections for l1, l2, l3, l4 terminals as per rdso spec no. rdso/pe/spec/ac/0184-2015 (rev-1) and as per update of common bom items issued by rdso lr. no. el/7.1.108/mssbc, dt. 17/09/21 to schneider cat. no. lc1d1150046n5 +la4da2n +ladn22, abb catalogue no. af 190b-40-22 and l&t cat. no. mcx 34 only acceptable.
Tender For supply and replacement of internal and external electrical installation at conference room, badminton room and other location in siri fort sports complex. - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the pointwith 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. (i/c rebate of replaced item).a) group c (dsr-2022,1.10.3), wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed pvc conduit, and earthing the point with 1.5 sq. mm f copper conductor single core cable etc. as required. (i/c rebate of replaced items)a) group c (dsr2022, 1.55.3), wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed meduim class pvc conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing (i/c rebate of replaced items) as required. (dsr-2022,1.12), wiring for light/ power plug with 4x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 2 nos. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. (i/c rebate of replaced items)(dsr-2022,1.13), wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, singlecore cable in surface/ recessed medium class pvc conduit as required. (i/c rebate of replaced items)a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (dsr-2022,1.14.1), b) 4 x 16 sq. mm + 2 x 6 sq. mm earth wire (dsr-2022,1.14.11), supplying and drawing following pair 0.5 mm dia frls pvc insulated annealed copper conductor, unarmored telephonecable in the existing surface/ recessed steel/ pvc conduit as required. (i/c rebate of replaced item). 1 pair (dsr-2022,1.18), supplying and fixing following size. modules. gi box along with modular base cover plate for modualr switches in recess etc. as reqd.(i/c rebate of replaced items) (a) 1 or 2 module (75mm x 75mm) (dsr-2022,1.27), supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (i/c rebate of replaced items)a) telephone socket outlet (dsr-2022,1.24.6), supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (i/c rebate ofreplaced items) (dsr-2022,1.25), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing andfixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required. (i/c rebate of replaced items) (dsr2022,1.31), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing andfixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required. (i/c rebate of replaceditems) (dsr-2022,1.32), supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) (i/c rebate of replaced items) (dsr_2022)a) 4 way (4 + 12), double door, b) 6 way (4 + 18), double door, c) 8 way (4 + 24), double door, supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the ex