Get complete information related to latest Suspension Bolt Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Suspension Bolt Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Suspension Bolt Tenders.
Tender For supply of set of galvanized hexagonal head bolt fully threaded of grade 8.8 as per is: 1364, with 1no. flat washer as per is: 2 016 and 1 no. spring washer as per is: 3063 and nut as per grade 8 is specification: 1) set of hexagonal head bolt of size m10x50 mm with suitable flat washer, spring washer and nut ? 200 nos./set 2) set of hexagonal head bolt of size m10x45 mm with suitable flat washer, spring washer and nut - 200 nos./set 3) set of hexagonal head bolt of size m10x30 mm with suitable flat washer, sprin g washer and nut -200 nos./set 4) set of spring washer and flat washer suitable to m8 size hexagonal head bolt-1000 nos./set 5) s et of spring washer and flat washer suitable to m5 size hexagonal head bolt- 1000 nos./set 6) set of spring washer and flat washer suitable to m6 size hexagonal head bolt - 1000 nos./set 7) hexagonal nut suitable for m10 size hexagonal head bolt -1000 nos./set bolt & nut make: tvs / gkw/bolt master / dfl/unbrako / lps / vif. spring washer make: tvs / gkw/bolt master / dfl/unbr ako/ lps/vif/forbes/bbbb. note: firm should submit authorised dealership certificate along with tenderotherwise offer will not be considered. [ warranty period: 12 months after the date of delivery ]
Tender For annual supply of water supply materials to doddaballapura cmc - wrought middle (galvanized)gi elbow for 50 mm, pvc 4 inch x 2.5 inch reducer., submersible motor cable 3 core flat pvc sheathed submersible pump cable 3c x 4 mm2, pvc pipe 2 inch x 2.5 inch pvc reducer, frls pvc insulated multistrand copper wire 10 sq mm, pvc pipe-od 160 mm and 6kg/sqcm, pvc tee 90mm, hemp rope for general use, wrought middle (galvanized)gi bend for 50 mm, wrought middle (galvanized)gi plugs for 50 mm, wrought middle (galvanized)gi tee for 50 mm, pvc pipe-od 200 mm and 6kg, pvc160 mm tee, pvc160 mm elbows, pvc pipe-od 110 mm and 6kg, pvc90 mm elbows, pvc pipe-od 90 mm and 6kg, pvc75 mm tee, pvc elbows75 mm, pvc pipe-od 75 mm and 6kg, pvc tee 50 mm, pvc pipe-od 50 mm and 6kg/sqcm, pvc saddle 2 inch x1/2 inch, pvc 2 inch end cap, pvc mta 2 inch, pvc fta 2 inch, end cap 3/4 inch pvc, pvc pipe-3/4inch, ferric alum, poly aluminium chloride powder- ac 100 s, hand gloves per general use, ltug cable 25 sq mm.4 core, ltug cable 16 sqmm 4 core, ltug cable 10 sq mm.4 core, fuse cutouts 100a porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers, frls pvc insulated 1100v grade, multistrand copper wire 16 mm2, supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 v 3phaseabove 12.5 hp up to 25 hp, submersible motor pump cable finolex/eqilent brand 3c x 6 mm2, g.i 2 inch clamp set, g.i 2 inch plunge set, g.i bore cap 2 inch, b class 29 kg 2 inch gi pipe, pvc 6 inch tail piece, pvc 4 inch tail piece, pvc 3 inch tail pieces, pvc 2 inch tail piece, pvc 4 inch x 6 inch reducer., pvc 3 inch x 2.5 inch reducer, pvc 3 inch x 6 inch reducer, pvc 3 inch x 4 inch reducer, pvc 2 inch x3 inch reducer, pvc 2 inch x4 inch reducer, pvc 6 inch x 1/2 inch saddle, pvc 6 inch end cap, pvc 6 inch collar, pvc 4 inchx 1/2 inch saddle, pvc 4 inch end cap, pvc 3 inchx1/2 inchsaddle, pvc 3 inch end cap, pvc saddle 2.5 inch x 1/2 inch, pvc 2.5 inch end cap, chain wrench 24 inch, end cap 8 inch pvc, gm gate valve 2 inch, c i pipe 6 inch, pikaxe, axa blade for general use, leather sheet for general use, bolt and nuts 1/2 inch, bolt and nuts 3 inch, bolt and nuts 4 inch, bolt and nuts for valves, crow bar for water supply, grease for general use, g.i 1 1/4 inch pipe, g.i pipe 3/4 inch, solvent cement for general use, gm nrv heavy duty 2 inch, glandpacking batti 12 mm, glandpacking batti 10 mm, pvc elbows 8 inch, g.i pipe c class 2 inch 33 kg, outdoor panel board box 5x3x1 feet french door lock double door lock system 18 gauge, g.i tap 3/4 inch, pipe wrench 24 inch for general use, chiniki, lock 60 mm, lead for general use, pvc tee 110 mm, gum boots for ugd, d.i elbow 6 inch, ms flange 4 inch, ms flange 3 inch, ms flange 2 inch, sewage hose pipe 3/4 inch for ugd work, pvc elbows110 mm, pvc elbow50 mm
Tender For supply of hot dip galvanized bolt of size m16x50x37/38mm with one nut, lock nut, one punched w asher a-18 and one spring washer b-16 as per rdso specification no. ti/spc/ohe/fasteners/0120re v-1 (march 2017) and rdso drg no. eti/c/0073 mod-a make / brand : core approved vendor only [ w arranty period: 30 months after the date of delivery ]
Tender For corrigendum : tender for supply of wire gauge shutter - providing red marandi wood wire gauge shutter size 32 inchx79 inch including hinges tower bolt sliding door bolt etc. complete in all respect , steel chokhat , ms wooden screw , ms wooden screw , galvanized msnut bolt round head , ms door handle 6inch , ms tower bolt 8 inch , sliding bolt 300mm , door spring , aluminium sheet 28 gauge sheet , takora triangular file , ms nails without heads 0.75 inch , ms nails 2.5 inch , ms nails 2 inch , ms nails 1.5 inch , ms nails 1 inch , black tack nails 0.75 inch , gi wire mesh 24 gauge x 12 mesh , scrapper 5 inch , bit 6mm for concrete , plastic tasla , aluminium catcher , bit 6mm for wood , bit 8mm for wood imported , bit 12mm for wood imported , sand paper grit 120 number 9 inchx11 inch , mortise latch and lock with 6 levers
Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst
Tender For supply of spare parts of deep well hand pump conforming with latest amendment under dws division ramgarh 204-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12x1.75x40mm long common to both mk-ii & iii., hexagonal nut m12x1.75. , high tensile bolt m10x1.5x40mm long., nyloc nut m10x1.5mm, handle axle (stainless steel)., ball bearing 6204z., spacer for handle, chain with coupling., nitrile rubber cup washer for mark-ii & ill., nitrile rubber sealing ring mark-ii., nitrile rubber seating big for lower valve mark-ii., nitrile rubber seating small for upper valve mark-ii., hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i.), front cover (g.i.), handle assembly (g.i)., water tank assembly for mark-ii (g.i.), connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ii., upper valve assembly complete set for lm-ii, lower valve assembly complete set for im-ii, reducer cap for cylinder mark-ii, plunger rod (s.s.) for mark - ii, upper valve guide (gm)., rubber seat retainer far mark- ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top & bottom., brass linear, check valve seat for mark - ii, 32 mm g.i. socket, gst @ 5% (add sgst 2.5% + cgst 2.5%)
Tender For supply of 5/8" (15.88 mm) dia, zinc plated/galvanized lock bolt with collar, grip no. 16 with grip r ange 25.40 - 31.75 mm. material and specification : rdso's spec. no: is/rdso wd/0001: 2022. [ warr anty period: 30 months after the date of delivery ]
Tender For supply of set of fasteners , one set consisting (1) prevailing torque type nut m16-is:7002-8-p. spec ification as per drg no- ae 63105 alt-d item no-6, qty. 01 no. (2) hex. hd. bolt iso 4014 -m16 x55 -8.8 specification as per drg no- ae 63105 alt-d item no-2, qty. 01 no. (3) galvanized split pin 2mm dia. x2 5 mm specification as per drg no- ae 63105 alt-d item no-5 qty. 01 no. make - tvs, tuff, dfl and un brako. [ warranty period: 30 months after the date of delivery ]
Tender For supply of ht hexagonal head galvanized iron screw with nut fully threaded of size m10 x 50mm conforming to is 136 4/pt -2 & 3/2002 (fully threaded) grade 8.8 for screw and grade 8 for nut with 1 no, check nut to is 1364/pt -4/2003 grad e 5, 2nos of plain washer to is 2016 & 1no spring washer to is 3063. or latest. all items galvanized. make tvs/unbrank o/gkw/vif/dfl/bolt master only [ warranty period: 12 months after the date of delivery ]