Latest sweeper spares Tenders | Government sweeper spares Tenders

Central Government And Public Sector

CTN :39652271

31 Mar, 2025 1.34 Crore

Delhi - Delhi

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - npcil office cum transit accom at noida; as per scope of work; as per scope of work- operation and maintenance of various systems, equipment and fittings and supply of items at npcil office cum transit accommodation at noida - 1.1 providing supervisory services for operation & maintenance activity of office cum transit accommodation for o&m work of 11 kv/415v/240v systems, domestic water / fire water/ r.o. water/, air conditioners, water coolers, d.g sets, lighting systems, earth pits, , telephone. lines distribution systems, maintenance of lawns, flowerpots, rectification of deficiencies related to civil work like plumbing, carpentry / masonry work and office work etc. cleaning of underground water tanks, and overhead water tanks. regular check of lighting system of the building and repair and replacement of bulb, choke, holder starter and office work etc. one activity shall be considered completed by deputing one highly skilled manpower as per qualification given in tech. spec. for 9 hours in a day as per work requirement. due to sensitivity of nature of work required round the clock 1.1 highly skilled supervisor will be available round the clock for any instance and requirement as the case may be. 1.2 providing services of technician in skilled category round the clock for o & m activity at noida office cum transit accommodation for following activities :- (i) operation & maintenance of 11 kv system/equipment & transformer:- cleaning and area up keeping of 11 kv switch gear panel and transformer and replacement of silica gel in 315 kva transformer if colour changes. ht drop out fuse and condition monitoring of complete switch gear area, 315 kva transformer oil level in conservator will be checked in one month. the oil level must be maintained between 25%-75%, if it reduces it should be topped up by new tested insulating oil of hv grade per is-335. bushing are to be examined for crack and dirt deposit and are to be cleaned or replaced as necessary once in six months or earlier if required. noise/humming sound, temperature rise (over heating) and crack in bituminous compound once in a month, general cleaning of the transformer to keep it free from dust and soot s quarterly or as required. (ii) preventive maintenance of two (02) nos. 415 volts air circuit breaker, 11 kv vcb (01 nos.) and switch gear area up keeping. the contractor is also responsible for maintaining 230 volts ac distribution systems in healthy condition. the scope of work includes maintenance of db s panels, & switchgear to ensure the functioning of fan, light, distribution of electricity within noida office cum transit accommodation building. the required spares shall be provided by npcil however consumables & hard wares e.g. lubricant, petroleum jelly, tb nut bolt, lugs etc shall be provided by contractor. (iii) operation & maintenance of domestic water/fire water system: the scope of work includes operation of bore well to maintain fire water tank level. preventive maintenance of domestic and fire water system, routine testing of fire water hydrants/pumps both diesel operated and electrical pumps. dewatering and cleaning of underground fire water tank and domestic water tank six monthly. (iv) cleaning of 2 no s of overhead fire tank of 5000 liter capacity and one no. domestic water overhead tank of capacity 5000 liter and one number of solar water tank six monthly, servicing and lubrication of 2 number of domestic water pump, 3 no. sump pump. servicing and lubrication of jockey pump, main hydrant pump, fire engine pump. the required all spares parts, hardware s e.g. lubricant, petroleum jelly nut bolt, gasket etc. shall be provided by contractor. (v) operation and maintenance of solar water heating system will require weekly cleaning of solar water panel, heater replacement and maintaining temperature with heater, repair and replacement of rubber

Central Government/Public Sector

CTN :39145973

13 Mar, 2025 NA

Bangalore - Karnataka

Tender For bid to ras custom bid for services - comprehensive annual maintenance contract of cs12 eakon cold store located at doddanekundi plant acd for a period of 3 years -summary: comprehensive annual maintenance contract includes maintenance, repair/replacement of all the components of the cold stores as follows: a) compressor, condenser unit, evaporator unit, suitable refrigerant, power supply system, control system, all safety features, operator panel, different type of sensors, interconnecting piping including drainage water pipes, cold room panels, coil and drain heaters, doors, lighting, temperature recording panels, and all other electrical, mechanical as well as electronics components of the systems & eurotherm electronic recorder.b) detailed scope of work:1 vendor should take over the cold stores for camc, in as-is-conditions., 2) preventive maintenance (pm) of the units to be carried out every month in consultation with user / maintenance dept, and detailed pm schedule to be drawn up and a copy of the pm carried out (service report) should be forwarded to purchase department duly endorsed by maintenance dept. for the reference and records. this pm should be carried out apart from periodical servicing and attending the breakdown calls. 3) servicing of the units should be carried out once in every three months, within two weeks of commencement of the quarter. this should be carried out preferably on sundays/ holidays. this servicing involves cleaning of condensers, cooling coils, filters (if any) leakage testing & rectification; and any/all other works required to ensure proper functioning of the units. a copy of the service carried out (service report) should be forwarded to purchase dept. duly endorsed by user/ maintenance dept for the reference and records. 4) the firm should monitor the temperature/ attend breakdown / preventive maintenance or any other request from user/ maintenance /quality dept. & monitor the functioning of all the cold stores. the firm should monitor and record the cold store chamber temperature every hour during shift hours and should take signature on recorded values by user, quality dept /maintenance dept. daily. the camc vendor s scope of work will be active for three shifts per day/round the clock, including sundays & holidays, i.e. all days throughout the camc period. 5) the firm should inform all the three departments user/qa/maint. in the event of malfunctioning of the equipment is noticed. they also should ensure safety of the materials stored in the event of failure of the cold stores. 6) the firm should report any abnormality, breakdown, or any bypass made immediately to all the three dept viz user, maintenance and quality dept. the equipment uptime should be greater than 95% without any interruption. 7) the firm should inform to the maintenance department in the case power failure, so that maintenance dept. can arrange for switching on the dg supply. 8) the firm should able to read the temperature in the electronic temperature recorder. 9) the firm should attend any number of breakdown complaints as and when reported by user/ maintenance dept/ quality dept during the contract period. the breakdown complaints should be attended within 8 hrs from the receipt of oral or written complaints and the system should be rectified within a day, except for the major breakdowns. 10) the firm should bring all the tools and tackles necessary including consumables for the repair / servicing. 11) the firm should hand over the cold stores in good working condition after the completion of camc, failing which necessary remedial actions will be taken to recover loses to acd-hal by deducting equivalent amount from the due amount. c) monthly checks: checking and servicing of cold stores.- (a) compressors- condensing units, solenoid valves and all gauges, drier, globe valves and all gauges, hp/lp switches, oil pressure switches ., expansion valve and mixture., refrigerant level and top-up if requir

Central Government/Public Sector

CTN :39555888

25 Mar, 2025 7.00 Lacs

Goa - Goa

Tender For custom bid for services - annual maintenance contract for ground support equipment- this scope of work for is for the engagement of a technical person qualified with a minimum diploma in mechanical engineering, for the amc of ground support and equipment (gse).the technical person will be deployed to manage and maintain all gse items. the scope of workinclude preventing, maintenance, repairs the scope of work under proposed amc comprises of:- (a) painting of all items of gse at least twice in a year or whenever required will be carried out bythe contractor. the paint will be supplied by the contractor. (b) the consumables spare including lubrication oil (servo 68, air compressor lub oil), hoses,filters, cables, plugs, seals, washers, pins, circlips, brushes for painting, cleaning material (includingsoap/ detergent, cloth, rag pieces, etc), gauges, sight glass, other plastic/rubber components,adapters, wheels, tyres, bearings, bushes, beading, all jack consumable spares (o-ring, springs,metallic bearing, bushes, metallic washers & grease), required for undertaking scheduled/ periodicalservicing and repair of the gse enclosed are to be supplied by the contractor. (c) the scheduled/periodical servicing of gse as per list attached and repairs- wheneverwarranted. (d) the cost of consumable require for scheduled/ periodical servicing of gse will be borne by the contractor. (e) the contractor shall cater for one in number qualified technician(diploma in mechanica!engineering) for five days in a week for carrying out routine inspection and servicing of gse. all the maintenance and repair activities are to be undertaken by suitable qualified technical personnel and within reasonable time frame as decided mutually by customer and contractor. working hours of unit(icgae goa/ 800 sqn) will be followed by the contractor's repair/ maintenance team. the leaverelief is to be provided by the contractor well in advance and the same is to be intimated to the unit.the leave relief needs to be qualified, knowledgeable and well conversant with the available gse. (f) calibration of gauges as per servicing schedule by nabl accredited laboratory is to beundertaken within contract and calibration certificate needs to be provided. (g) hydro static test (hst) of nitrogen cylinder and lp compressor is to be undertaken withincontract, if due. (h) replacement of gauges if unserviceable is to be undertaken within contract. -msme exemption - yes | startup exemption - no

Central Government / Public Sector

CTN :39266869

11 Mar, 2025 2.04 Crore

Jagatsinghapur - Odisha

Tender For corrigendum : custom bid for services - pdm1b24334 agency for hydro testing and ibr liaison during repair maintenance schedule testing of boilers hrsg ibr exchanger ibr vessels and other ibr equipment for power plant and other units of refinery during normal operation and shutdown-1) carbon steel piping for hydrocarbon services (with welding electrode e-6010 / e-7018) - units transportation of all piping items from owner's storage points to work site and / or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawing etc., threading, laying, erection and alignment of pipes upto a height of 5 meters on sleepers, pipe racks etc. or upto 5 meters depth in trenches, anchoring wherever required, connecting with equipment, nozzles, steam traps, strainers, orifice assemblies (including tapping upto first block valve), spray nozzles, rotameters; tapping for instrument connections like pressure gauges, thermowells, sample connections, vents, drains etc. including fixing of all types of sw valves, gaskets, nuts and bolts, all inline instruments, elbows, tees, flanges, reducers, full coupling or half coupling, reinforcement pads, earthing strip wherever required; welding prefabricated shoes and supports (including alignment) as per the drawings including preparation of small bore isometrics upto 1.5 inch nb, specifications, codes etc. and as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, flushing wherever required, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge., 2) provision of reinforcement pad (with welding electrode e-6010 / e-7018) transportation from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, gri nding, edge preparation as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, pneumatic testing, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge. 3) extra for ibr grade carbon steel piping joints. for ibr piping jobs, the scope of contractor shall be liasoning with ibr authorities including approval of drawings / documents from ibr authorities and also getting the final approval of the job from ibr authorities including payment of any fee or charges to ibr authorities for this purpose (20% of joints). 4) alloy steel piping (astm a335 gr. p22) units- transportation of all piping items from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawings etc. (alloy steel joints shall be welded by doing root run using tig welding followed by filler passes by manual / semi-automatic arc welding. the job is to be pre-heated prior to welding and all joints to be stress relieved and fully radiographed, however,

State Government

CTN :39508820

17 Mar, 2025 NA

Bemetara - Chhattisgarh

Tender For tender for tent rent (as per list) , drinking water materials (as per list) , flex banner printing work(as per list) , motor pump repair work (as per list) , electrical equipment (as per list) , cleaning materials (as per list) , construction work under chairman/councillor/alderman and other funds. , supply of public works materials (by list) , repair work and new work (cost up to rs. 1.00 lakh per work)

CTN :39436660

14 Mar, 2025 NA

Udyogamandal - Kerala

Tender For static equipment maintenance works at ammonia complex during ata 2025, as per tender conditions. - tube bundle pulling - e 213 a, insitu machining of the gasket face of the shell flange of e213 a, tube bundle pulling - e 1001, vessel inspection - f551, f552 and f553, de bolting the air sparger (mixer) and pipings including nrv of secondary reformer, bringing down and keep on stand for facilitating inspection and repair, fix back the sparger (mixer) after repair and fixing back the piping and fittings including nrv after replacing the gaskets., flare tip cleaning - cleaning of pilot burner tips (6 nos) of flare stack of size : 25 nb, skilled mechanical jobs including machinery / equipment installation, dismantling & refixing of pressure joints, piping & pipeline works, welding, machining jobsetc. requiring skilled workers. rate shall be quoted for man days of 8 hrs.

CTN :39389727

12 Mar, 2025 2.00 Lacs

Agartala - Tripura

Tender For supply of laboratory and scientific equipment - repair of thermal evaporator system, qsv 4 butterfly valve (details as per sl no 1 at annexure-a)., qsv 1 butterfly valve (details as per sl no 2 at annexure-a)., variac : required for controlling (increasing & decreasing) the voltage of the power from lt & ht transformer (details as per sl no 3 at annexure-a)., ht board : required for operating the discharge current for ion cleaning of the substrate by ion bombardment gadget. (details as per sl no 4 at annexure-a)., replacement of o rings : set of neoprene o rings required for the valves, chamber gadgetry, kf clamps, dp, lnt & collar. (details as per sl no 5 at annexure-a)., needle valve : manually operated fine control needle valve provided for controlled admittance for inert gas into the chamber (details as per sl no 6 at annexure-a)., quartz tube adopter : ss adopter for fixing on both sides of the quartz tube with provision for fixing valve, pressure gauges and pipeline to vacuum pump. (details as per sl no 7 at annexure-a., to pu 10 ball valve (details as per sl no 8 at annexure-a)., servicing of rotary pump (details as per sl no 9 at annexure-a)., servicing of pirani and penning gauges. (details as per sl no 10 at annexure-a)., servicing charges of the coating unit (details as per sl no 11 at annexure-a).

Sweeper Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

State Government