Tender For supply, installation, testing and commissioning of fixed furniture for main hospital building of hbch rc muzaffarpur bihar 842004 - over head cabinetsover head storage - size : 450mm(d) & 600mm (h)/site requirement(h) storage cabinet: providing and fixing overhead storage cabinet formed of 18 mm marine plywood of approved make finished with 1.5 mm laminates of approved shed and pattern with adjustable shelves of 18mm thick marine plywood as per drawings. shutters:shutter of overhead cabinet to be formed of 18mm ply finished with 1.5 mm laminate of approved colour and pattern, with auto closing spring loaded hinges (hydraulic type) and aluminium profile handles all complete . all external exposed edges to be finished with 2mm thick pvc edge band of approved shade.(front area to be measured) note-rate shall be inclusive of all necessary approved fittings like auto closing spring loaded hinges, locks, aluminium profile handles,tower bolts, and all necessary hardware items. (front area to be measured), full height storage unitproviding and fixing storage units of full/ low height as per drawing. they shall consist of 18mm thk. marine ply top, sides, bottom, shelves and shutters & 8mm thk marine ply for back. the bottom of the storages shall be at 75mm from ffl. the shutter with box type higes of approved make & teak lipping finished with melamine and with approved laminate on all the shutter edges.division of the shutters shall be made equally according to the length of the storages ( as approved by engineer in-charge/ architect). all the external surfaces including back shall be finished with 1.0mm thk. laminate of approved make. 18mm thk. marine ply shelves at 16 interval (approximately / divided equally) or as specified in drawing shall be provided. all inner surfaces shall be finished with laminate including the shutters. the cabinet has group locks, hinges,stopper, and magnate, handles of approved make & quality and provided s.s. satin finished handle of approved shape,size & make all complete. note- rate shall be inclusive of all necessary approved fittings like hinges,magnets, locks, 150mm long ss satin finish handles, and any necessary hardware items. (front area to be measured), double skin partition providing and fixing full height double skin type partition main frame: -aluminium sections of 16 gauge of size 50x50 mm aluminium section verticals at minimum 600mm centre to centre spacing and 50 x 25 mm size aluminium sections horizontal at 600mm centre-centre spacing. extra frame below slab soffit for conduit to run above.(make - jindal, indal, hindalco) skin: 12mm thk marine ply backing on both side screwed with frame as per the drawing. finish: finished with 2mm thick laminate of approved make. laminate shall be fixed on plywood skins with glue having grooves as shown in the drawing or as directed by engineer in charge *the rate shall be also inclusive of pattas & bands, grooves at any level, any design in veneer, textures etc including the necessary framing/ openings for electrical, telephone & ac outlets. front area to me measured & opening for the door should be deducted for payment. ** note -rate for high partition to include the cost of framework above false ceiling as required to fix the same to the ceiling slab for which no extra payment shall be made and the rate quoted shall be inclusive of the same., 12mm thick toughened glass fixed partitions with filming:providing and fixing in position 12mm clear float toughened glass partition with patch fittings for the full height glass partitions as per the direction of the engineer-in-charge. the work to include making necessary template for all the glasses and then cutting the clear float glass to correct size, making all the necessary holes, cuts etc., then toughen the same.the cost to include all hardware (patch fittings etc) required of hettich/haffele/dorma or approved equivalent make viz., single corner patch, top and bottom corner
Tender For supply of electrical equipments and installation works of electrical and instrumentation system for oesc at maps site - supply of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, washer for shear bolt, nut for shear bolt, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, installation of cable tray supporting structure including site works such as cutting, drilling, threading, welding, fixing the hardware, touch up painting using zinc rich paint for welded surfaces etc., as per the specification, cable installation note, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/2002, 2003 & 2004/dd, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 150 mm width, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 300 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 150 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 300 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 150 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 300 mm width, common cable tray and ventilation duct support for supporting 1 tier of straight tray or elbow of 150 mm width, cabling systemsupply of following sizes of 6.6kv/11kv rated, al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed, gi wire/ strip armoured power cables along with steel cable drums, 3cx185 sqmm armoured cable, supply of following sizes of 1100v rated, cu/ al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed power cables along with steel/ wooden cable drums, 3.5cx400 sqmm, al conductor, armoured cable (gi armour) with steel cable drum, 3cx2.5 sqmm, cu conductor, un-armoured cable with wooden cable drum, supply of following sizes of 1100v/ 650v rated, cu conductor, pvc (type-a) insulated, overall screened, frls pvc (st1) inner and outer sheathed, gi armoured control cables along with steel/ wooden cable drums, 4cx2.5 sqmm, 1100v rated with wooden cable drum, 2cx2.5 sqmm, 1100v rated with wooden cable drum, 4cx10 sqmm, 1100v rated with steel cable drum, 2cx10 sqmm, 1100v rated with steel cable drum, 10px1.5 sqmm, 650v rated with steel cable drum, supply of following medium duty gi pipes/ heavy duty erw rigid conduits/hume pipe for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following medium duty gi pipes/ conduits/hume pipes for routing cables (from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge), including supply and installation of clamps/ fasteners/ supports, accessories like bends/ couplers along with cutting, threading etc., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following sizes and types of cable trays and accessories as detailed in drawings and specification including supply & inst
Tender For lt-02/24-25 of se/gcc-ii - supplying, fabricating, galvanizing, transporting of gi towers parts including stub and cleat extension parts, cost of all materials labour lead lift etc., complete for the 230 kv dc towers. (ms parts), supplying and tranporting of gi bolts, nuts, washers etc., for towers, extensions, cross arms et., including of all materials labour lead lift etc., complete., supplying , transporting of hardware fittings for conductor and earth wire including cost of all materials labour lead lift etc. complete. - ss fittings for zebra., supplying , transporting of hardware fittings for conductor and earth wire including cost of all materials labour lead lift etc. complete. - st fittings for zebra., supplying , transporting of hardware fittings for conductor and earth wire including cost of all materials labour lead lift etc. complete. - vibration dampers for zebra., supplying , transporting of hardware fittings for conductor and earth wire including cost of all materials labour lead lift etc. complete. - midspan joint for zebra., supplying , transporting of hardware fittings for conductor and earth wire including cost of all materials labour lead lift etc. complete. - repair sleeve for zebra., supplying , transporting of hardware fittings for conductor and earth wire including cost of all materials labour lead lift etc. complete. - pa road for zebra., transportation & installation of pipe type earthing , earthing for towers including cost of all t&p labour, lead, lift etc., complete as directed by the engineer., transportation and installation of danger plate including cost of all t&p, labour, lead lift etc., complete as directed by the engineer., transportation and installation of number plate including cost of all t&p, labour, lead lift etc., complete as directed by the engineer., transportation and installation of phase plate (set of three) including cost of all t&p, labour, lead lift etc., complete as directed by the engineer., transportation and installation of name plate (set of two) including cost of all t&p, labour, lead lift etc., complete as directed by the engineer., transportation and installation of circute plate (set of two) including cost of all t&p, labour, lead lift etc., complete as directed by the engineer., transportation and installation of anti-climbing device (set of four) including cost of all t&p, labour, lead lift etc., complete as directed by the engineer., labour charges for erection of towers and tower extensions including sorting out of tower parts, tightening, punching of bolts and nuts and rectification of defects if any during erection, one coat of zinc rich primer, 2 coats of zinc rich enamel paint, cost of all materials, labour, lead, lift etc., complete., welding of exposed faces of bolts and nuts 1cm each at two places opposite to each other after tightening, punching to avoid theft of tower parts including cost of welding rods, hire charges for generator including welding rods and painting with good quality of zinc paint on the welded portion etc., complete., labour charges for paying out, rough sagging, tensioning of 6 nos. zebra conductor with fittings including transport, sorting out of conductor according to drum schedule and loading and unloading at site, providing trussels and rough sagging, tensioning, clipping, labour, providing vibration dampers including giving jumper connections, cost of t&p, lead and lift etc., complete under lc., transporting, erection, testing and commissioning of 1no. opgw 48wire including fixing of hardware fittings and accessories etc., complete (stringing of opgw is to be done using tension stringing equipments), labour charges for transporting and hoisting of 120 kn polymer insulators including cost of all tension fittings, all materials, labour, lead, lift, etc., complete under lc condition., labour charges for transporting and hoisting of 90 kn polymer insulators including cost of all tension fittings, al
Tender For procurement of furniture - three seater bench : providing and supplying desk-cumbench (three seater) with an overall size 1500mm x 1000mm x 760mm. the top, seat, back and modesty of the desk shall be made up of 18mm thick particle board of grade ii of is 12823 with approved shade. the top profile shall be in rectangle shape with corner round with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the top shall be supported on crca pipe frame having cross-section area 25mm diameter with 1.2mm thick. the shelf shall be made up of 0.8mm thick high yield strength crca sheet of grade d confirming to is: 513. it should be supported on crca round pipe having cross-section area 25mm round on front side and attached with modesty panel with help of screw. hooks made of 2mm thick x 30mm wide strip should be provided on the vertical side frame on both side of the desk for hanging bags/bottles. the complete steel structure shall be welded with base pipe having cross-section area 32mm diameter with 1.2mm thick and also be epoxy polyester powder coated to the thickness 50-60 thick. the size of the writing top shall be 1500mm(w) x 400mm(d),seat size shall be 1500mm(w) x 340mm(d), back size shall be 1500mm(w) x 200mm(h), modesty height shall be 300mm (h). all the size shall have the tolerance of upper and lower deviation of 10mm for board & 0.2mm for metal. finish : approved shade as approved by engineer in charge/employer. product certification: iso 9001, iso 14001, iso 50001 & iso 45001 (certifying agencies of iso should be accredited by nabcb ), aiota education furniture,ansi/bifma x6.1-2018 test report, igbc, bifma membership and green pro (cii) certificate to be submitted in technical bid. approved make : godrej , herman miller, steelcase ,hof,rockworth,haworth, feather,lite. size: 1500mm l x 1000mm w x 760mm h, arts and craft table : providing,supplying,arranging and fixing table of size 750mm l x 750mm w x 750mm h having top made of 18mm thick prelam particle board with 2mm thick pvc edge banding finish. understructure made of 40mm square pipe crca 18 guage with powder coating finish. high quality hardware should are used. construction: knock down construction. the rate shall include all materials, hardware and labour etc. complete. finish : approved shade as approved by engineer incharge/employer. product certification: iso 9001, iso 14001, iso 50001 & iso 45001 (certifying agencies of iso should be accredited by nabcb ), aiota education furniture, igbc, bifma membership and green pro (cii) certificate to be submitted in technical bid. approved make : godrej , herman miller, steelcase ,hof,rockworth,haworth, featherlite size: 750l x 750d x 750h, art and craft chair : cc 001 - providing and supply ss pipe dia 1 inch round, thichness 16 guage, pp shell made of virgin polypropylene + co-polymer. recyclable - nylon shoes at frame bottom, stackable. colors : red,green,orange,white,black & grey.the rate shall include all materials, hardware and labour etc. complete. finish : approved shade as approved by engineer incharge/employer. product certification: iso 9001, iso 14001 & iso 45001 (certifying agencies of iso should be accredited by nabcb ), ansi/bifma x5.1-2017, aiota education furniture, igbc, bifma membership and green pro (cii) certificate to be submitted in technical bid. approved make : godrej , herman miller, steelcase ,hof,rockworth,haworth, featherlite (standard size), soft board/pin up board: providing,supplying,arranging and fixing notice board having 9mm soft board as a core materail 1mm laminate sheet as back materail and surface of 1.mm felt cloths, having profile of heavy alumnuim fluted anodized profile 10 to 12 micron of 18 to 25 thick board c channel and corner is made uo of molded virgin abs grey colour hanging vertical and horizontal hanginh facilty as per selected colour & size in