Tender For corrigendum : entering rate contract for supply of surgical and ortho consumables items to the health institutions in ut of puducherry - before quoting bidders were requested to check the schedule of requirement in the notice inviting tender for supply units and estimated annual requirement. the selected bidder shall supply the items as per the supply units mentioned in the nit. note: for all the items samples should be submitted. without sample quotation will be rejected., conduction paste for bera/psg, dpoae probe couplers for otoacoustic emmision, ent-bulls eye lamp, epistaxis balloon catheter, fibrotic light cable, formalin chamber 24 inch with 3 trays, frs-15rm-8-forceps 15cm, hand surgery and reconstructive surgery basic set, hd-d for vessel size 1.5 to 3.5 mm approximator, hd-s for vessel size 1.5 to 3.5 mm approximator, ib-10-instrument beaker, ici-15-instrument rack, icl-1320-0-instrument case, impedence probe tips set - paediatric, impedence probe tips set adult - regular size, impedence probe tips set adult - extra large size, led surgical head light with battery, metallic ear speculum, black finish full slotters (adult) set of 4, nasal splint teflon large size, nasal splint teflon medium size, nasal wax plates 14x7x1.5 cm approx, nhf-15rm-8-needle holder, otoscope, partial ossicular replacement teflon prosthesis (porp titanium), partial ossicular replacement teflon prosthesis (porp), rigid laryangoscope with mls instruments, rigid oesophagoscope with instruments, silicone block, skin prepgel for bera/psp (nuprep), total ossicular replacement teflon prosthesis (torp), vaccum surgical drainage set (100ml capacity), ayre spatula wooden (sterile), abb-2v-double approximator with frame vessel size 1.0 to 2.25mm for veins, abb-3v-double approximator with frame 11mm for veins, bin for sterilization s.s. size-15"x18", blood pressure (b.p.) apparatus - digital (neonatal) with neonatal cuff and usb adaptor and cable(approx. 1m length ), blood pressure (b.p.) apparatus - led - manual-(adult), blood pressure (b.p.) apparatus - manual (neonatal), blood pressure (b.p.) apparatus - manual (paediatric), blood pressure (b.p.) apparatus - mercurial - manual-(adult), blood pressure (b.p.) apparatus armlet cuff (neonatal), blood pressure (b.p.) apparatus armlet rubber (adult), blood pressure (b.p.) apparatus bulb with valve (adult), blood pressure (b.p.) apparatus connector, blood pressure (b.p.) apparatus glass tube, blood pressure (b.p.) apparatus hinges set, box with lid s.s. 17 x 12 x 4, box with lid s.s. 12.5 x 9 x 4, breast pump (electric), cardiac resynchronisation therapy -pacing device (pacemaker, leads & all accessories), cardio pulmonary resuscitation (cpr) board, cautery cable & tip - size 16g, channel cleaning brush (bw-20t), channel opening cleaning brush (mh-50t), clamp-b-1a-microvascular single clamp 8mm for artery, clamp-b-2a-microvascular single clamp 11mm for artery, clamp-b-2v-microvascular single clamp 11mm for veins, clamp-b-3a-microvascular single clamp 17mm for artery, clamp-b-3v-microvascular single clamp 17mm for veins, clamp-caf-4-clamp applying forceps 14 cm long, clamp-cb-1,clamp box ,70 x 45 mm, clip applicator, cord cable 3.5mm (light), d-saz-vessel dilator 11 cm long angulated tip dia 0.2 mm, e.c.g. bedside ecg machine along with stand, e.c.g. probe neonatal, embolization coil, enema can s.s., etco2 cable, external ventricular drain (evd) tube for csf drainage system, forceps - flexible triprong (biprong) forceps 6fr, forceps - reusable rubber tip grasping forceps, halogen lamp led 40w, 22.8v, irrigation flow pump, lumbo peritoneal shunt, manual vacuum aspiration syringe (mva/eva), micro motor straight hand piece, micro motor with hand piece, mini lap, mini rotating vision drum, modified hydroxyapatite blocks (g bone), monitor electrolyte cable, mri compatible dual chamber pacemaker (pacemaker, leads & all accessories), nail spatula, nail splitter, needle - chromic 1 with circle trocar point
Tender For shifting of electrical equipment with associated material from rsu nangal raya to t.e. bldg. janak puri, delhi - dismantling of 2 nos. dg set 75 kva complete with batteries, exhaust pipes, cables, panel(inside canopy) from rsu nangal i/c dismantling of all cable, earthing & exhaust pipe connection etc. complete as reqd., dismantling of 3x8.75 tr ductable ac units from rsu nangal i/c dismantling of indoor & outdoor units, piping, cable tray, drain pipe and cable, connection etc. complete as reqd., dismantling of one 3x31.5 kva avr from rsu nangal i/c dismantling of all type cables, earthing connection etc. complete as reqd., dismantling of the following material from rsu nangal i/c dismantling of all types of cables/conduits, earthing connection etc. complete as reqd.: capacitor panel, avr by pass panel, l t panel, ac panel, fire panel, wall fans, fittings, phase reversal, change over switches, distribution boards, cable trays, cables, celing/wall fans, exhaust fans, and fire detectors etc complete as required., loading & unloading of dg sets with associate material i/c transportation from rsu nangal to t.e. bldg. janak puri by heavy labour, chain pulley/hydra etc as reqd., loading & unloading of 3x8.75 tr ductable ac units i/c indoor units & outdoor units, piping, cable tray and cable, etc. i/c transportation from rsu nangal to t.e. bldg. janak puri, by heavy labour,,chain pulley/hydra etc as reqd., loading & unloading of 3x31.5 kva avr with associated material etc.complete as reqd. i/c transportation from rsu nangal to t.e. bldg. janak puri, by heavy labour, chain pulley/hydra etc as reqd., shifting of the following material from rsu nangal i/c loading of all types of cables/conduits, earthing connections, capacitor panel, avr by pass panel, l t panel, ac panel, fire panel, wall fans, fittings, phase reversal, change over switches, distribution boards, cable trays, cables, celing/wall fans, exhaust fans, and fire detectors etc. unloading at janak puri bldg., and location as per the directions of engineer-in-charge. note: 1) the agency has to prepare a detailed inventory of all items to be dismantled i/c quantity before dismantling and shifting to other site and submit it to the engineer-in-charge for taking gate pass. 2) the agency is fully responsible for any misplaced/short material receipt from rsu site and suitable recovery will be made for any such item. 3) the cables will be rolled into loops and approximate length should be mentioned in inventory. 4) the dismantled items alongwith inventory will be handed over to engineer-in-charge, after shifting the material at site.
Tender For repair maintenance of ei & light at constitution club of india, rafi marg, new delhi. (sh:- rearrangement of cables on terrace of cci including fixing of cable trays).
Tender For manual shoveling to clear out the ash collections from nook and narrow constrictions in and around the buffer hopper vessels at d-pump areas of esp ab & cd passes, a11, c11, d pumps and its conveying lines, in and around the esp transformers and air washing of cable trays @ esp
Tender For manual shoveling - mtps-ii - mi circle - o&ahs - manual shoveling to clear out the ash collections from nook and narrow constrictions in and around the buffer hopper vessels at d-pump areas of esp ab & cd passes, a11, c11, d pumps and its conveying lines, in and around the esp transformers and air washing of cable trays @ esp
Tender For repair maintenance of ei & lights at constitution club of india, rafi marg, new delhi (sh: rearrangement of cables on terrace of cci including fixing of cable trays).
Tender For corrigendum : balance electrical works like supply installation testing and commissioning of power panels ht lt cables cable trays conduiting point wiring earthing etc for fgd plant of ramagundam stpp unit 7 stage iii 1x500mw under lot5
Tender For a) scope of work covers supply, installation and commissioning of total 12 nos.of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 with required pcs, electronic modules, splitters, modems, junction boxes, mounting kit, enclosures, interconnecting cables, software and all other accessories required to make the system complete and fully functional, shall be provided for continuous level measurement and monitoring of level of each coal bunker and also to ensure satisfactory performance of the system commissioned at rtps site which shall be on the basis of single point responsibility, completely covering the activities and services in respect of all the equipment works specified and covered under the specifications. the work involves i) installation and commissioning of 12 nos. 3d radar level type level transmitters with suitable mounting accessories, display indicators, isolators, annunciator, smps, terminals, panel internal wiring, led bulbs, door switch etc. at the bunker level ii)commissioning of rs 485 communication /other cables from bunker level transmitters to the desktop pc at u-5&6 control rooms.iii)commissioning of desktop pcs for 3d multi vision for monitoring of all the 12 bunkers level at u-5&6 control room respectively and also both units bunker levels at pc being installed at chp control room. iv)loading of all the required licenced software to the desktop pc for 3d radar level transmitter and cable routing, glanding, mounting of cable tray, termination and ferruling is in the contractors scope.cable trays will be provided by m/s.kpcl.b)all fabrication works required for installation and commissioning of instruments with jbs,protective cover/canopies and allied works are in contractor/agency scope itself.c) all civil works like drilling/cutting rcc floors,grouting,refilling floors,conduiting under ground cables cable tray mounting, masonary works are in contractor/agency scope itself.d)storage of materials while executing works is single point responsibility of contractor/agency scope itself. e)software details-1. the page containing all bunker level data shall be in full page which must be visible from at least a distance of 6-8mtr .(font size should be more) and shall have a historical trend storage for minimum 45days & real time trend with not less than15min sampling time. f) at chp control room, the existing kpcl pc shall be enabled with bunker level software & shall be communicated through existing lan and as a redundancy the seperate optical fiber cable communication with media convertor has to be provided.the lan cables has to be protected with cable conduit g)materials supply shall be completed in all respect within the stipulated period as per the contract. materials shall be delivered to rtps site through ee(stores)o&m. unloading of materials at rtps site location and shifting of the same to work location is under the contractor/agency scope only. h)handling, shifting, unpacking and erection and commissioning of the entire system shall be under the scope of bidder itself. i)all required consumables, hardware and licenced software, accessories and any other materials which are not included in the scope and required for successful installation and commissioning of the 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 are under the contractor/agency itself. j)all the materials required for the installation and commissioning of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit- 5&6 shall be made as detailed under the technical specifications. k)interfacing of all the bunker level transmitters outputs to the desktop pcs at u-5&6 control rooms through rs - 485 communication protocol.(the required 1 pair x 1 sq.mm shielded armoured cables as per requirements shall be supplied approx-500 meters or if more). for more details of scope of work refe