Tender For providing of goods transport service – per trip based service - machinery & equipment; open body taurus; 9 ton truck,goods transport service – per trip based service - machinery & equipment; 6 ton containerised truck, equipped with temperaturecontrolsystem; 6 ton containerised truck, equipped with temperaturecontrolsystem
Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperaturecontroller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te
Tender For corrigendum : supply of digital spirit level , radius gauge , metric screw pitch gauge , spring dividers , combination square set , digital inside micrometer , digital outside micrometer , digital vernier calipers , high precision digital height gauge , vices , filler gauge
Tender For biharsupply of machines and laboratory equipments for mechanical & civil engineering in the premises of government engineering college, kaimur - demonstrate & study of steam boilers and its mounting & accessories, to learn the mechanical properties of engineeing materials. (chart/, flex), to learn the working of steam power plant. (chart/ flex), to learn the working of vapour compression refrigeration system., (chart/ flex), to learn the working of impulse steam turbines. (cut section model), to learn the working of gas turbines. (chart/flex), to learn the working of reaction steam turbines. (cut section model), to learn the working of vapour absorption refrigeration system, hemispherical sectional models of screw threads, , standard bolt, , bolts of four types, , foundation bolts, , locking arrangement of bolts, , rivetted joints-wooden, , bush bearing, , plummer block or pedestal bearing, , foot step bearing, flexible coupling, , flanged coupling, , stuffing box, , connecting rod , spark plug, , sine bar complete set, (a) sine bar (100mm, hardened tool steel), (b) sine bar (200mm. hardened tool steel), sine centre complete set, sine centre complete set ( roller distance 200mm centre height : 65mm or roller distance 300mm, centre height 75 mm), vernier bevel protector, vernier bevel protector( blade edge angle 60 deg , 45 deg edge, blade length 150mm, ) range = 360deg, lc: min, it is capable of ), lathe tool dynamometer, x direction measuring range : 0 ± 3000 n ( 0. 1 n sensitivity ), y direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ), z direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) measurement : x, y & z direction force measurement simultancously. data recording, signal conditioner : gpds signal conditioner accuracy = ± 0.5 %, computer: window operating system, software “ i t “ lathe tool software exclusively designed and developed for measuring the forces in x. y & z direction during operation., software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording, printing, transfer to ms excel, dimensions : sensor ( 55 x 125 x 55 mm ) 20mm x 80mm segment provided for fitting in the tool holder of lathe machine, power requirement : 220 v 1 phase, 50 hz, drill tool dynamometer, axial load capacity : 500kgf. torsional load capacity 50 kf. cm. computer: window operating system, software “ dt drilling tool software exclusively designe and developed for measuring axial & torsional forces developed during drilling operation, software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording. printing, transfer to ms excel, vernier gear tooth caliper (0.02mm resolution, mi-26), slip gauge complete set slip gauge block set, metric, 87 or 103 block of grade 1 steel, optical flat, optical flat, l=12mm, d=45mm, 0.2um, optical flat, l=12mm, d=45mm, 0.1um, optical flat, l=15mm, d=60mm, 0.2um, optical flat, l=15mm, d=60mm, 0.1um, optical flat, l=0.5". d=1.8", 0.000008", optical flat, l=0.5". d=1.8", 0.000004", optical flat, l=0.6", d=2.4", 0.000008", optical flat, l=0.6", d=2.4", 0.000004", vernier calliper 300 mm, vernier calliper (digital) 150mm, micrometer outside 0-25mm, digital micrometer (25mm, 0.001mm resolution), journal bearing test rig, description: the apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a fhp motor. the bearing is freely supported on the shaft and scaled at the motor end. the speed of the motor is controlled by the speed control uniy. manometer is mounted on bearing to measure the pressure at different position around the circumference, bearing is free and can be adjusted at any position of circular scale. the bearing can be loaded by attaching weights to the arm supported beneath it., technical details:, journal : diameter 50 mm bearing : diameter 55 mm weights : 4 weights, motor : variable speed fhp motor, control panel :
Tender For corrigendum : supply of 743242501030 - digimatic height gauge double column type(metric) , including carbide tipped scriber, , 743242500510 - digimatic vernier caliper 150mm digimatic vernier caliper with dust/water protection , 743242500050 - digimatic vernier caliper with dust/water protection confirming to ip67 level in rang , 743242501850 - digital outside micrometer 2" -3" /50.8-76.2mm with ratchet stop, resolution: 0.00005in/0 , 743242501860 - digital depth vernier range: 0-200mm, lc: 0.01mm similar to make and model: mitutoyo 57 , 743242501870 - digital level and protractor, used as level and slope meter, range: 0- 360deg, resolut