Latest timber logging Tenders | Government timber logging Tenders

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

Central Government/Public Sector

CTN :38604444

30 Dec, 2024 NA

Salem - Tamil Nadu

Tender For single seater wooden sofa material: mahacony wood, total number of seats in the sofa set 1, size: 27d x 29w x 36h inch, style: antique, traditional (as per photo attached), frame covering : ful ly upholstered (colour variable), sofa set is foldable to use as bed: no, backrest cushion material: foam, d ensity of cushion of backrest material: 32, density moulded foam covering material for seat and backrest : suede fabric 35mm, frame structure material and size (plus or miuns 1 mm): any other wood of min 1.5 in ch thickness, seat cushion material : polyurethane moulded foam, type of spring in the base / seating : no , colour : teak finish matte, polish : sheenlac polish & melamine matt (sheenlac material only), warranty p eriod : 5 years, service centre : service centre should be available at any of location over salem division jur isdiction, supply: mettupalayam, podanur jn, coimbatore north, coonoor, ooty. 1 sample to be supplied at consignee office before full supply. detailed specification and photo is attached as annexure. [ warranty period: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :38604445

30 Dec, 2024 NA

Salem - Tamil Nadu

Tender For wooden sofa set (3+1+1) material: mahacony wood, total number of seats in the sofa set : 5, number of single seater units (nos):2, number of three seater units (nos):1, size : 27dx 70wx36h inch (three seater), style : antique, traditional, frame covering : fully upholstered (colour variable-final colour will be selected by consignee after issuance of p.o), sofa set is foldable to use as bed :no, backrest cushio n material : foam, density of cushion of backrest material: 32 density moulded foam, covering material for seat and backrest : suede fabric 35mm, frame structure material and size (plus or minus 1 mm): any othe r wood of min 1.5 inch thickness, seat cushion material: polyurethane moulded foam, type of spring in the base / seating: no, colour : teak finish matte, polish: sheenlac polish & melamine matt (sheenlac material only), warranty period : king size mat: 5 years, supply : mettupalayam, podanur jn, coimbatore north, coo noor. 1 sample to be supplied at consignee office before full supply. service centre: service centre should be available at any of location over salem division jurisdiction. detailed specification and photo is attached as annexure. [ warranty period: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

CTN :38345635

18 Dec, 2024 17.50 Lacs

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - office renovation - invitation of bids for conversion of offices outside engineering barrier gate to storage compartments of oil & dope store at oap, mumbai-29 , "dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below " , "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. " , "demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. " , "providing and constructing brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):with modular bricks " , providing and laying internal plaster in c.m.(1:4) 12 to 18 mm thick minimum, to brick masonry and/ or concrete surfaces in any location and at all levels including cleaning and watering the surfaces, filling out hollows or out of plumb surfaces with mortar and finishing to correct line and plumb etc. complete. , providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of "'basf" (master emaco 348 s) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of aiesl/airport premises. , "steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade more. fe-500d. " , removing and dismantling existing rolling shutter with ms work in single section or built-up section including rsj, angles, tees, flats, plates, gusset plates, channels etc., including dismembering using gas cutting, cutting machine lowering the same from any level and stacking up to the lead of 50 m. all as directed by eic, etc., complete., including labour, tools , plants etc., complete. , "providing and fixing isi marked flush door shutters conforming to is :2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. "

Central Government/Public Sector

CTN :38492497

27 Dec, 2024 41.80 Lacs

Gandhinagar - Gujarat

Tender For provn of furniture for 08 offrs 56 jcos/ors md accn at mil stn dharangdhra - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07)dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mmh.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs. make-amko or equivalent, bin linen multipurpose with ironing board(fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of hardwood sheesham with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg., chair dining fd/map-ii/04 (fd/map-ii/04)dimension: overall size shall be 450mm wide x450mm deep and 950 mm height ,450mm high up to seat. description:- (a) all wood to be usd shall be 1st clas hard teak wood (b) the seat of chair shalll be made of 40 density foamcushion having thickness 75mm. the cushion shall be placed and pasted on 12mm bwr plywood as per size of seat duly covered with approved tapestry cloth of rate not less than450mm per mtr. the seat shall be be fixed over the rails and screwed from wood stopper with 30mm long screws.(c) pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. rest all specification and dimensions are as per drg. finish:- the chair shall be be polished in high gloss melamine polishin walnut shade after preparation of surfaces., hat stand with mirror large (fd-233)dimension:overall size shall be 1330 mm long, 710mm high.description:the inner frame shall be of 50mmx20mm teak wood battens six in nos .the back and front of frame shall be covered with 6mm thick commercial ply.the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive.six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5mm thick looking mirror of (saint gobian,modiguard/atul) shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand.finish: all teak wood surfaces shall be given high gloss french polish with lacquer finish. all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drgs, peg table (fd-384)dimension; overall size shall be 450mm long,300mm wide and 380mm high.description: legs shall be of teak wood of section 30mmx50mm.the legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.two bottom rails of size 20mmx40mm shall be fixed between the legs .a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.top of the table shall be of 18mm thick pre-laminated mdf board with 4mm teak wood edging all round the top of table.finish: all wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.rest all as per drg., receptacle pvc small (fd/e6/map/13)dimension/capacity:-the receptacle shall be of capacity 20 ltrsdescription:the body of receptacle pvc shall be made up of thick polymer plastic of thickness not less than 2.5mm,provided with swivel lid a

CTN :38473773

27 Dec, 2024 NA

Barmer - Rajasthan

Tender For supply of barrack and road or electric and mechanic items - hdpe water tank 500 ltrs , cp brass chromium plated wall mixer , pvc bib tap 15mm , cp bib tap 15mm , bip tap cp large , pvc water tank covers 500ltrs , pvc waste pipe 32 x 800mm , vitreous china urinal bowl type flat back , bathroom hand shower leaded brass grade dcb2 , bathroom water shower abs plastic , pvc ball clock clamp w coated rod and ball 20 mm , pvc seat cover pedestrian for ewc , pvc water tank covers 1000ltrs , cp bracket for curtain rod , vitreous china wash basin hand , alu tower bolt 150 mm , pvc ball clock clamp epoxy coated alm rod ball 25 mm , gi elbow 15 mm , brass spindle face for cp piler cock bib cock , jumper washer for brass bib cock , gi nipple 25 x 300mm , pvc connection 15 x 600mm , unbranded pvc coated polyseter canvas water tank syntax 500 ltr , ptmt 15mm swiling shower hose , gi nipple 15 x 300mm , stainless steel sink 32 mm dia pipe , gi nipple 15 x 125 mm , gi tee 15mm , cp end blubs for curtain rod , gi socket 20 mm , ms butt hinges 100mm , pvc 40 mm dia short l bend pipe for ewc , window glass panes 42 cm x 27 cm , gi tank nipple 20 mm , gi nipple 15 x 150 mm , gi elbow 20 mm , pvc jet spray with 1 m tube , window glass panes 27 cm x 52 cm , aluminum sliding bolt 250mm , gi tank nipple 25 mm , cp screw wood of 35 x 7 mm pkt of 250 , ms bracket for wash basin , brass solid wedge gate valve 25mm , gi socket 15 mm , ascoraj abs pug and socket distribution board , gi reducer socket 25 x 20mm , oil putty for window glass , alu door stopper with double rubber bush , tubing gi 20 mm , window glass panes 20 cm x 40 cm , white cement in 1 kg pkt , knob round for side board book case , easte fitting for wash basin waste coupling 50 mm , cp grating without hole 100 x 25 mm , gi union 15mm , gi reducer socket 20 x 15mm , hasp and staple 75 mm , teak wood bottom , gi tee 20 mm , gi pipe med grade 15 mm , cp steel screw 50mm pkt of 250 , leaded tin bronze fancy tap 15 mm , pvc urinal corriguted waste pipe 50 x 800mm , bib tap cp l shape 15mm , pvc teflon tape , fevicol sh , looking mirror 450mm x 600mm with alumium angle frame , piller cock cp 15mm , hydraulic door closure steel , cp angle cock 15mm , pvc flushing cistern 10 ltrs cap , cp brass chromium plated wash hand mixer , cp health faucet with cp flexible pipe im , gi nipple 20 x 300mm , pvc connection 15 x 450mm , bathroom water shower jet spray with tube unbranded , gun metal valve 25mm , gi nipple 20 x 200mm , pvc connection 15 x 750mm , pvc 40 mm dia long l bend pipe for ewc , gi socket 25 mm , gi elbow 25 mm , gi nipple 15 x100 mm , gi union 25mm , gi union 20mm , gi nipple 15 x 25mm , wall care putty 5 kg , socket reducing steel pipe fitting 25 mm , heat shrink straight through joint 3 x 95 sq mm , flrs pvc insulated single core copper cble 1.5 sq mm 90 mtr long , copper cable 3 core 2.5 sq mm 90 mtr roll , mccb 25 ka 63 amp 4 pole , 20w 2000 lumen led tubelight , 10w 1000 lumen led tubelight , frlsh insulated double core copper cable 2.5 sq mm 180 mtr long , plug socket outlet industrial type 250v with mcb spn 32 amp , pvc insulated flrs unsheathed flexible copper 4 sq mm 90 mtr , mccb tpn 4 pole 415v 160 amp 36 ka

State Government

CTN :38455147

30 Dec, 2024 NA

Panchmahal - Gujarat

Tender For supplying and stacking various type of building, road &other construction materials, atvarious places of taluka panchayat,kalol under mgnrega (annual unit rate) - cement isi mark 53grade, etc.opc, white cement, tmt bars fe-415, hysd steel bars, r.c.c. np3 pipe 900m.m. dia, r.c.c. np3 pipe 600m.m. dia, r.c.c. np3 pipe 300m.m. dia, crushed stone aggrigate for hard qulity 10 to 20 mm, crushed stone aggrigate for hard qulity 40 to 63 mm, hand broken metal 25-90m.m., rubble local, coarse sand, quarry dust, bricks- convention size, binding wire, kota stone 25m.m. thick, glaze tiles, vitrified granite tiles 8 mm to 10 mm tick 24 x 24 size, pvc water tank 1000 ltr, galvenise iron sheet 0.8 tick class 3, iron angle, pevar block m 200 grade 60 mm tick, hire charge for mixer machine rent, hire charge for water tanker rent 6kl capacity, murram (binding material), road roller hire charges 8 tone, wash basin 550*400m.m., colour distamper primer, marble slab/platform 25m.m. thick double polished, galvanised mild steel tube medium grade 20m.m., galvanised mild steel tube medium grade 32m.m., galvanised mild steel tube medium grade 40m.m., indian type wc pan size 580x 400m.m., cast iron nahni trap, flush cock, chromium plated brass /bib tap 15m.m., sw gully trap 100 x 100 mm size, kitchen sink 600m.m.*450m.m.*150m.m. (steel), pvc pipe 110m.m.dia 6kg per/sqm, supplying and staeting brickbals 40 mm, hire charge for vibrator surface, hire charge for vibrator needle, crushed aggrigate 6 - 10 m.m., crushed stone aggrigate for hard qulity 20 mm, aggregate 12-40m.m., machine cut metal 40-63m.m., m.s. grill, teak wood door window frame with shutter, asbestos sheet

Timber Logging Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government