Latest tissue grinder Tenders | Government tissue grinder Tenders

Central Government/Public Sector

CTN :38957194

29 Jan, 2025 NA

Katipala - Karnataka

Tender For supply of thermofisher sola ii sulphur analyzer spares -thermocouple p n 27-1108-0,s -type used on pyrolyzer, for sola-ii analyser , heater fibre-insulated ,60 v 450w for sola-ii analyser p n 29-1230-0 , pyrolyzer tube looped p n 30-1025-0 looped ,sola-ii analyser , rotor injection valve p n 45-1823-0,1.0 micron liter ,6-port for sola-ii analyser , valve head valco ,6 port p n 75-1333-0 v for sola-ii analyser , pyrolyzer chamber o ring seal ,5 5 8 id ,5 7 8 od,1 8 width ,p n 63-1135-0 for sola-ii analyser , o ring kit p n 63-1158-0 high temp valco actuator for sola-ii analyser , ferrule 1 4 graphite p n ha-101812 for sola-ii analyser , inline filter 2micron meter for orifice flow ,1 8 in tube connection p n 47-1362-0 for sola-ii analyser , lamp xenon puvf flash so2 bench for sola-ii analyser p n te-8666 , filter inline 1 8inchinch tube,0.5 micron p n 47-1644-0 for sola-ii analyser , injection valve assy p n 75-1332-0 1 16,6 port,1.0micro liter ,150psi,175c for sola-ii analyser , puvf lamp trigger pak p n te-8774 for so2 bench for sola-ii analyser , puvf dc power supply board p n te-8949 for sola-ii analyser , flsher supply board so2 bench p n te-9681 for sola-ii analyser , pca i o circuit pc board assy p n 89-2898-0 for sola-ii analyser , solenoid pcb assy tracker stream relay switching p n 89-2803-0 for sola-ii analyser , puvf pmt p n 113507-00 for sola-ii analyser , analog to digital board for so2 bench p n te-8943 for sola-ii analyser , flash intensity pcb photo detector p n te-8884 sola-ii analyser , input board for so2 bench p n te8951 sola-ii analyser , puvf temperature control board p n te-8765 for sola-ii analyser , pca sola micro processor assy ,pcb cpu p n 89-2897-0 for sola-ii analyser , power supply 24 v din rail mount p n 85-1164-0 , mirror assy complete sola ii standard unit p n te-8888 , furnace temperature controller wallow p n te-2650-g for sola-ii analyser , tubing coiled sulfinert 1 16inchinch od p n 64-1304-0 for sola-ii analyser , ferrule 1 16 t vespel graphite p n 32-5000 for sola-ii analyser , 3 rtd assy w 6ft lead p n 25-1001 for sola-ii analyser , reaction chamber p n te-8786 for sola-ii analyser , opticle baffle p n te-8788 for sola-ii analyser reaction chamber , o-ring p n te -4829 for sola-ii analyser reaction chamber , inlet chamber p n te8811 for sola-ii analyser reaction chamber , new screw p n te-8484 for sola-ii analyser reaction chamber , retaining ring p n te-8817 for sola-ii analyser reaction chamber , lens relay p n te-8850 for sola-ii analyser reaction chamber , o-ring p n te -4808 for sola-ii analyser reaction chamber , attenuator p n te-8812 for sola-ii analyser reaction chamber , lens for te bench p n te-8851for sola-ii analyser reaction chamber , o-ring (pk 2) p n te-4830 for sola-ii analyser reaction chamber , o-ring p n te-4820 for sola-ii analyser reaction chamber , light trap p n te-8787 for sola-ii analyser reaction chamber , relay solid state p n ha-100645 for sola-ii analyser , o-ring p n te-4811 for sola-ii analyser , o-ring p n te-4829 for sola-ii analyser , o-ring p n te-4831 for sola-ii analyser , 43c optcal benach assy p n te-57p713-1 for sola-ii analyser , basy, pmt p n te-8887 for sola-ii analyser , pcb mother board p n te-9829 for sola-ii analyser , transducer, pressure assembly p n te-9877 for sola-ii analyser , pmt power supply p n te-9901 for sola-ii analyser , power supply, ac-dc, 5,12,-12v out, 60w p n 5-3220-310 for sola-ii analyser , flow switch p n 25-1352-0 for sola-ii analyser , solenoid ,24vdc,5port,4 way,2 pos,sp p n 31-0030 for sola-ii analyser , actuator hi temp air 2 pos type a90s p n 75-1348-0 for sola-ii analyser , filter,1 8inchinch tube ,0.5 micron p n 47-1645-0 for sola-ii analyser. , tubing coiled sulfinert-5ft,p n 64-1303-0 for sola-ii analyser. , 1 4inchinchod x1 18inchinch id ss tubing sul - 5ft,p n 64-1305-0,for sola-ii analyser. , 1 8inchinch tee,ss sulfinert treate p n 68-2138-2 for sola-ii analyser. , 1 4inchinchm x 1 8inchinch connector ss p

Central Government And Public Sector

CTN :38548650

27 Jan, 2025 NA

Gautam Budnagar - Uttar Pradesh

Tender For corrigendum : supply of group tender for various medical equipment (g 1- microbiology) - ultraviolet/white light transilluminator, analytical weighing scale - electronic, analytical weighing scale - electronic, laboratory autoclave (vertical), laboratory autoclave (vertical), micro pipette adjustable (manual), deep freezer (-80c), electronic pipettes digitally adjustable, pharmaceutical refrigerator, laminar air flow work station with heap filter complete, automated tissue grinder (homogenizer), walk in cooler, multi-channel pipettes, dessicator cabinet, hot air oven (more than 200 litres), digital standard lab bacteriological incubator, vertical autoclave, fully automated gel documentation system, uv/visual spectrophotometer, gradient thermal cycler with standalone ups, dry heating block for pcr, agarose gel electrophoresis, water bath, liquid nitrogen drum, binocular microscope with pc, binocular microscope student ug, serum inspissator, forced air incubator microprocessor controlled, refrigerated shaker, refrigerated incubator

CTN :38175441

18 Jan, 2025 NA

Khurda - Odisha

Tender For bid to ras corrigendum : supply of laminar flow cabinet horizontal 4x2 inch 52x40x601 by 2 , water bath 15 ltrs capacity with 06 holes rt plus 5 degree c plus 99 , auto clave vertical ss 25x450 mm 22 ltr , digital temperature controller cum indicator , digital timer , auto pressure cut off system , hot air incubator 50 ltr cap and temp set rt plus 5 degree c upto plus 65 c degree , colony counter digital count upto 9999 , ammonia testing kit , milk adulteration testing kit , formalin test kit , weighing scale , milk heater , milk analyser , lacto meter , probe thermometer , egg tester electric , refrigerator 230 ltrs

Central Government/Public Sector

CTN :38954891

05 Feb, 2025 NA

Delhi - Delhi

Tender For supply of tissue grinder (ball mill)

Central Government/Public Sector

CTN :38608940

20 Jan, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of electrical lab items to uprvunl panki 1x660mw and wbpdcl sagardighi 1x660mw project - electronic test bench , portable digital multimeter (41/2 digit) , digital multimeter (table mounting type) , 5 1/2 digit , 7 1/2 digit , rcl bridge/analyser , in circuit tester , function generator , digital oscilloscope , tachometer , soldering iron (10w, 25w, 40w) , 1 no. of each rating , solder sucker , soldering desoldering station , potentiometer/ rheostat , ac thermometery bridge , stop watch , mv calibrator , portable , table mounted , ma calibrator , portable , table mounted , thermocouple calibrator , portable , table mounted , rtd calibrator , portable , table mounted , multifunction calibrator , digital insulation tester , sound level meter , portable electro-pneumatic calibrator , portable digital / analog vibration meter , digital type , analog type , vibration / shock pulse analyser cum data collector cum , balancer , decade resistance box , analog type , digital type , lan/ coaxial cable meter/tester , earth/ground resistance tester , fiber optic testing tool set , tongue tester , stroboscope , test temperature detector - test rtd , single phase auto transformer , three phase auto transformer , portable multifunction counters , phase sequence meter , portable ph calibrator/simulator , logic probe , marker printers , computer aided calibration system , dc regulated power supply , overhead projection board (interactive white b , optical time domain reflectometer , continuity tester , resistance thermometer bridge , decade capacitance box , decade inductance box , clip on ac power meter , portable high speed trend recorder , laser based shaft alignment system

CTN :38917495

01 Feb, 2025 12.00 Lacs

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and

CTN :38725689

22 Jan, 2025 NA

Pune - Maharashtra

Tender For corrigendum : process control equipments to instrumentation - process control equipments, cascade control trainer, iot interface system, multi function callibrator for pressure and temperature, interacting and noninteracting system, digital turbidity meter, air quality monitoring system (pm2.5), hand held rtd calibrator, digital clamp meter, plc trainer kit, plc software, flow measurement trainer, temperature measurement trainer, air compressor, ni daq card (details specificqations for all above items as per )

State Government

CTN :38924786

23 Jan, 2025 5.00 Lacs

Bengaluru - Karnataka

Tender For seed/tissue grinder tube mill control, mt 40.100 disposable grinding chamber

Central Government/Public Sector

CTN :38878687

30 Jan, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of electrical testing equipment - dc insulation testers , ac motorized insulation testers , portable universal bridge , digital power measuring instrument , digital multimeters for ac and dc , analog multimeters for ac and dc , precision multiple decade resistors , laboratory connection leads , single phase toroidal transformers , three phase toroidal transformers , phase-sequence indicators , portable power factor measuring instrument , portable digital frequency meters , portable temperature measuring instrument , portable sound level measuring instrument with microphone , digital mechanical revolution counters , stop watches , hook on voltammeters ranges 1 point 2 to 60 a and 60 to 600 v , hook on voltammeters ranges 10 to 500 a and 240 to 500 v , portable multichannel vibration meter , pocket ohm and capacitance meters , portable earthing resistance measuring device , stroboscope , laboratory cable 1 x 1 point 5 mm2 cu 100 m ring , banana plugs

State Government

CTN :38869319

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

Tissue Grinder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government