Tender For auction sale of others - ms scrap-ms scrap released condemned unserviceable parts and cut-up parts of wagon consisting of different items 01] hand brake wheel, 200 nos. 02] brake beam, 4 nos. 03] yokes, 3 nos. 04] different sizes and thickness of ms sheets 8500 kgs approx., 5] ms doors 120 nos. 6] adopters 45 nos, 07] top and bottom pivot 5 nos. 8] coupler body[cbc] 58 nos. 09] knuckle 34 nos. 10] different sizes of springs 100 nos, 11]. lock 25 nos. 12] mixed scrap [cutup parts of doors, springs, connecting rods, locking pieces, knuckles, lock lifter assembly, footsteps, operating handles, floating lever, air hose carriers, wedge blocks, all types pins, floor channels, branch pipes, all types brackets, split pins, bolts, nuts, yokes, side frame keys, throwers and other items, etc., total qty-30.439 mt approx., total stacks 01 and 02[ for each item]. ds-8 no.013389-25-04094 dt.15.12.2025 and 013389-26-00216 dt.09.04.2026. loc. available at wagon depot dkj located scrap yard beside sick line no 13 and 14. delivery by actual weighment basis. note- 1] for ms sheets cutting is permitted.2] as per railway boards letter dt.23/12/2021, 3 days advance intimation is to be given to rpf for witnessing of deliveries. the same has been reiterated by dsc/rpf/sc vide letter dated 22/09/2025. firms are therefore requested to take this period into consideration while uploading their requests for delivery so that deliveries are completed on time, well within the fdp. pl no.98050011. hsn code 72042910. available under sse cnw dkj, state- tg.
Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, bobrmn1, boxnm1 & bcnm1 wagons no as following: [1] ser 25079617706 boxnr [2] er 72029660404 bobrnm1 [3] ser 10079666960 boxnm1 [4] nr 30038961066 bcnm1 [5] cr 30019060320 bcnm1 [6] er 30029020147 bcnm1 [7] cr 30019160457 bcnm1 [8] ser 30079160251 bcnm1 [9] er 30029125682 bcnm1 [10] ser 10079646511 boxnm1 [11] ser 10079662764 boxnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (132.180 mt) is the lot quantity (132.180 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowedinside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnm1 & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.
Tender For auction sale of others - disposal of ferrous scrap released materials ( mild steel) such as: (1) scrap cut off piece of materials, qty=1780 kg. (2) scrap cut off piece of m.s sheet, qty=20780 kg. (3) scrap door (boxn), qty=110 nos.=6050 kg. (4) scrap brake beam broken, qty=08 nos.=480 kg. (5) scrap sab, qty=12 nos.=400 kg. having local lot no. 09/obr/25. location:-scrap yard c&w/obr.
Tender For corrigendum : auction sale of others - disposal of ferrous scrap released material (ms) such as: (1) cut off materials parts, qty=6000 kg. (2) brake beam nlb, qty=25 nos.=1700 kg. (3) door for boxn, qty=50 nos.=3000 kg. (4) door for bobrn, qty=30 nos.=6600 kg. (5) release cone assembly of ctrb's, qty=795 nos.=2385 kg. (6) release seal of ctrb's, qty=1800 nos.=720 kg. (7) release seal wear ring of ctrb's, qty=1800 nos.=540 kg. (8) release spacer of ctrb's, qty=340 nos.=170 kg. (9) release cup of ctrb's, qty=42 nos.=336 kg. having local lot no. brwd/2025/12. location:-surrounding area of scrap yard brwd beside north side of wheel lathe shed.( approx 05 mtrs.)+beside north side of wheel lathe shed. approx 08 mtrs. from air compressor machine.
Tender For corrigendum : auction sale of others - disposal of ferrous scrap released materials(cast steel) such as: (1) knuckle, qty=18 nos.=648 kg, (2) draft, qty=30 nos.=4392 kg, (3) yoke, qty=03 nos.=213 kg, (4) coupler body, qty=20 nos.=3240 kg, (5) brake beam, qty=05 nos.=360 kg, (6) brake cylinder 355 mm, qty=33 nos.=2244 kg. (7) brake cylinder 300 mm, qty=02 nos.=118 kg. (8) distributor valve, qty=63 nos.=2223 kg. (9) angle cock, qty=106 nos.=393 kg. (10) cbc lock, qty=29 nos.=185 kg. (11) adapter, qty=27 nos.=324 kg. (12) dirt collector, qty=06 nos.=35 kg. (13) top casting, qty=02 nos.=87 kg. (14) cut off pieces of materials, qty=9735 kg. having local lot no. 15/ptru/25. location:- inside the scrap shed.
Tender For corrigendum : auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- lying at bin no. a-19 in scrap yard judw. remarks- [1]loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery
Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous and miscellaneous, material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, rubber items ,spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, plastic, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. wooden and railway track shall be excluded from the lot if found any.digging will be permitted only
Tender For auction sale of depot ferrous scrap - ubl/gsd/a-04/c&w/26/a [pl no. 98987343]condemned and un- serviceable c&w scrap consisting of snubber wedge blocks, bolsters, brake beam, bogie frame, adopter narrow jaws, coupler assembly, hand brake wheels, operating handles, centre pivot tops, cbc lockers, push rods, sab regulators, control rods, sticker casting wear plates, and other c& w similar items . available under the custody of dms c&r ward gsd/ubl. location: road no -01, a-block gsd / ubl at bin no.-a-04. remarks-. delivery should start from one end. no pick and choose allowed