Latest transmission tower foundation Tenders | Government transmission tower foundation Tenders

State Government

CTN :41306019

08 Aug, 2025 7.91 Lacs

Baramulla - Jammu And Kashmir

Tender For lis achoora gurez by way of cement concrete, lining wall and crate protection bund on supply channel, escape structure and other necessary work incl. mechanical works, pump shed and foundation block etc (balance work)

State Government

CTN :41092744

12 Aug, 2025 NA

Baruipur - West Bengal

Tender For construction of 2 pump fire station g i storied building with g iii storied foundation at haral under baruipur block at village haral under south 24 parganas division pwd in the district of south 24 parganas during the year 2025 26

State Government

CTN :41092745

12 Aug, 2025 NA

Parganas - West Bengal

Tender For construction of new 2 pump fire station gplusi storied building with gplusiii storied foundation at amtala more under bishnupurii block in the district of south 24 parganas under south 24 pargnas division pwd during the year 2025 26

CTN :41286794

11 Aug, 2025 NA

Bharuch - Gujarat

Tender For tender for fancy benches , paver block work , platform / grill / gate construction , chimney foundation construction , cabin renovation , etc.

CTN :41291454

21 Aug, 2025 89.00 Lacs

Srinagar - Jammu And Kashmir

Tender For lis lethpora supply installation testing commissioning of 02 pumping units allied civil works including foundation works submersible pump for priming 3 ton travelling crane with chain pulley block operators cabin and allied electro-mechanical works

CTN :41272076

08 Aug, 2025 6.69 Lacs

Kavaratti - Lakshadweep

Tender For construction of segregation shed with material recovery facility centre for plastic waste management at agatti (re tender-i) - surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, providing and laying cement concrete 1:4:8 ( 1 cement: 4 river sand: 8 granite chips ) foundation and plinth., providing and laying cement concrete block (machine moulded) masonry in in foundation and plinth in cm 1:6 with blocks of size 40cmx20cmx15cm, providing and laying half block masonry in super structure above plinth level upto floor five level cement mortar 1:4 ( 1 cement 4 metal sand ) cement concrete block of size 40cmx10cmx15cm, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand), providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer g.i.pipe, steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. hot finished welded type tubes, providing aluminium sheet roofing fixed with galvnized iron jor l hooks and 8mm dia c.i plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick., cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc.complete a) 40mm thick with 20 mm nominal size stone aggregate, providing ridges or hips in aluminium sheet roofing with g.i /j or l hooks bolts and nuts 8 mm dia g.i plain bitumen washers complete. 0.56mm thick., providing and fixing m.s welded mesh 50mmx50mm in position and applying a priming coat of approved steel primer with all necessary nails

CTN :41274944

11 Aug, 2025 32.14 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of svl pd with integ power mgt sys - quick setting compound rapidite confirming to is specification. , natural sand. , aggregate 20mm. , aggregate 40mm. , load bearing concrete pcc soild blocks , integral water proofing compound , reinforcement. tmt steel bars 16 mm dia bar for rcc roof band , reinforcement. tmt steel bars 12 mm dia bar for rcc roof band , reinforcement.tmt steel bars 10 mm dia bar for rcc roof band , reinforcement.tmt steel bars 8 mm dia bar for rcc roof band , ms binding wire not less than 0.9mm dia annealed conforming to relevant is , ply wood 1.50m x 0.20 m and 12mm thick for shuttering of rcc roof band. , ply wood 10 mm thick as per requirement for flat surface , ismb 150 rsj 150 x 75mm 3.5 m long , ismb 150 rsj 150 x 75mm 1.20 m long , steel roofing trough srt of size 1630 x 613 x 180mm made out of 2mm thick hot , hdpe laminated sand bags of size 75 x 40cm sand colour and each bag having weight not less than 75 gms , pbs roll self finished tarfelt hessian base for water proofing grade- 1 . , silicone gel sealant of 01 pack of 400 gms including applicator gun , bitumen for filling of expansion joint of pcc , hdpe sheet having weight 100 gm sqm in black colour of width 5.50mm , pre fabricated steel window loop hole of size 600mm x450mm shall be provided with amn pd. , pre prefabricated steel door , pre fabricated steel shutter loop hole of size 2200mm x600mm shall be provided with svl pd. , pre fabricated steel shutter loop hole of size 1200mm x600mm shall be provided with svl pd. , ci grating of size 300 x 300 mm with frame not less than 4 kg. , pvc swr pipe 110 mm dia single socketed 3 mtr long , synthetic enamel paint colour og chocolate , red oxide primer conforming to relevant , oil bound distemper of approved brand. , thinner make asian berge shalimar. , chalk white , cement base paint. make duracem snowcem british xtracem , 10 mm thick base plate 400x400 for column , column ismb 250x175 56.90kg rm 3 mtr long , beam ismb200x100mm 25.40kg rm for first floor and roof 2.4 04 nosmtr long , beam ismb150x75mm 15kg rm for first floor and roof 2.4 04 nos and 2.2 04 nos mtr long , 8 mm thick ms plate connection between column and ismb 200x200mm , normal nut bolts 150mm long 16mm dia , 8mm thick ms plate for first floor 2.4 x 2.2mtr , 6 mm thick gable side wall ms sheet 14 nos 2.40x0.30m and 7 nos 2.20x.30m , ms steel angle 65x65x6mm 5.80kg rm for stair case , column shs 75x75mm 04 nos 3mtr length , beam shs 45x45mm 05 nos 2.40 mtr length , 8mm thick ms plate 150x150mm connection between column and beam , cgi sheet 3mtr x 1 mtr , 8mm thick ms plate 0.15 x 0.15mtr , normal nut bolts 150mm long 12mm dia , foundation bolt 450 mm long dia 16mm , pvc cable insulated and pvc sheathed 10 sq mm 2 core , switch socket combination 16 amp 3 pin , switch socket combination 5 6 amp one way , t w switch board 10 inch x8 inch , t w switch board 7 inch x4 inch , t w switch board 4 inch x4 inch , main swithch 32 amp two pole 240 v , change over switch 16 amp two pole 240 v conforming to is making havells standard , led tube light fitting 1x18 w 4 feet long complete with all accessories incl tube rod , led bulb 20 w , flexible wire twin core 23 00076 conforming to is 9537 pt iii 1983 , pvc conduit pipe 20 mm dia conforming to is 9537 pt iii 1983 , pvc l bend for 20 mm conduit pipe 20 mm dia , pvc round block squareblock rectangle block for mounting of switches socket etc. , ms screw 20 mm conforming to revelent is pkt of 100 nos , ms screw 25 mm conforming to revelent is pkt of 100 nos , tape insulation in 2 cm width 10 mtr roll confirming to isi 12714 , pvc saddle clip 20 mmconforming to is 3419 1976 , pendent holder bakelite , pvc insulated cable and pvc sheathed 2.5 sq mm 1 core copper conductor conforming to is 694 1990 , mcb 16 amp double pole 240v confirming to is 8823 1978 , mcb 6 amp two pole 240 v , mcb distribution bds 8 way single door with blank , switch socket combination 6 amp 3 pin , pvc junction box 2 to

CTN :41189694

04 Aug, 2025 3.15 Lacs

Ramgarh - Jharkhand

Tender For repairing of hydraulic oil cooler, fuel tank and its mounting, rod bush guide, repairing of air cleaner housing and its foundation, bearing block assy, (lh and rh) and leveling jack assembly of drill and hydraulic pump of idm 30 drill sl. no. rdc 135

CTN :41197100

01 Aug, 2025 29.54 Lacs

Chennai - Tamil Nadu

Tender For construction of wash room block near auditorium for kalakshetra foundation, chennai. sh i: civil portion sh ii: electrical portion

State Government

CTN :41219129

02 Aug, 2025 12.68 Lacs

Delhi - Delhi

Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts

Transmission Tower Foundation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government