Latest tray trolley Tenders | Government tray trolley Tenders

State Government

CTN :44949733

20 May, 2026 12.90 Lacs

Ludhiana - Punjab

Tender For supply of engine operated high pressure water mist fire fighting trolley (q3)

corporations/Associations/Others

CTN :44935807

30 Apr, 2026 12.00 Lacs

Ahmedabad - Gujarat

Tender For work of re-instatement of excavation work done regarding complaints received in the water department, as well as supply of tempo/tractor trolley, labor for redressal of other complaints in vasna ward of west zone (arc)

corporations/Associations/Others

CTN :44952797

29 Apr, 2026 9.99 Lacs

Ahmedabad - Gujarat

Tender For supplying tractor trolley/chota hathi with labour for chlorine container for hypochloride work from dudheshwar water works to diff. over head tank in vastral ward in east zone

CTN :44948746

11 May, 2026 NA

Calcutta - West Bengal

Tender For supply of 8 liter water dispenser jar , 20 litre water jar , bucket mop wringer trolley , acrylic name board with colour vinyl pasting , notice board for office with glass cover

CTN :44959359

01 May, 2026 NA

Sonitpur - Assam

Tender For supply of oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round or square block , fire extinguisher of 1 kg capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma overall height 1 point 755m , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms plateform and size of wheel 127 mm , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

State Government

CTN :44931548

24 Apr, 2026 NA

Lucknow - Uttar Pradesh

Tender For procurement of power supply pcb ,skin sensor with holder ,trolley acrylic baby tray , trolley baby mattress , front panel sticker (display sticker) , examination bulb led type , on/off switch , skin sensor , moulded, acrylic safety with side panels dropdown facility with pillars & clips , trolley acrylic baby tray , trolley baby mattress

CTN :44952915

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/21/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) sc 057422/c gs 2) se 058413 gs 3) se 058414 gs 4) sc 037231/c wgscn 5) se 058254 wgscn 6) se 058227 wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos. serviceable bogies against srl no: 01-01 (end-1), srl no.02-01 (end-2), srl no.04-01 ( end-1) and srl no. 06-02 (both bogies are serviceable) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-01, srl no.03-02, srl no 04-01 and srl no 05-02nos. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44952916

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/22/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058802 wgcb 2) cr 054534 wgscn 3)wr 052380 wgscn 4) er 022337 wgscn 5) ec 024283 gs 6) nr 05272 wgscn 7) se 048702 gslrd nb: [1]. (a) all coaches are to be sold without 28 nos. wheel sets complete alongwith roller bearing against srl no 01 to 07 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against srl no: 04-02 (both bogies are serviceable) (c) the coaches are to be sold with 12 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 02-02, srl no.03-02, srl no 05-02, srl no 06-02nos and srl no 07-02. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 02 nos of bogies with complete fittings & 28 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44942569

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/09/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 008839 vph 2) se 908914 rs 3) se 908915 rs 4) se 908981 art/rhv 5) se 918921 ce 6) se 898964 art/sv nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos.serviceable bogies against srl no: 02-02 (bogie no.1831/07 & scn 057/15), srl no.05-02 (bogie no accw 5143/04 & 052360/05), srl no.06-01 ( bogie no. scn 1366/14) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 03-02, srl no.04-02, and srl no 06-01no. (d)the coaches are to be sold with 04 nos. ng rail. against srl no.02 and 03. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44938214

30 Apr, 2026 NA

Sonitpur - Assam

Tender For supply of medium store shelter e e - head fitting hwith led lamp 10 watts rechargeable , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma overall height 1 point 755m , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms plateform and size of wheel 127 mm , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

Tray Trolley Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government