Tender For emergency repairs to upper dome and floor of main mausoleum at taj mahal, agra -supply of materials - dry river coarse sand - kalpi, uttar pradesh (free from dust). (rate including gst)., surkhi of ist class brick- iglas, aligarh, uttar pradesh. (rate including gst)., unslaked lime ist quality - katni, madhya pradesh (sealed bags). (rate including gst)., red sand stone thick required size - bansi paharpur, rajasthan. (rate including gst)., brick aggregate of ist class brick- iglas, aligarh, uttar pradesh. (rate including gst)., marble dust/powder- makrana, rajasthan. (rate including gst)., gum babool. (rate including gst)., gur/sheera. (rate including gst)., batasha. (rate including gst)., belgiri. (rate including gst)., copper strip (5-7mm thick). (rate including gst)., steel clamp required size - 304 grade. (rate including gst)., red oxide powder. (rate including gst)., tractor trolley with driver and disel for removal of malwa from monument to outside of municipal limit capacity of trolley 2.5cum. approx. (rate including gst)., providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (rate including gst)., polythine sheet - isi mark. (rate including gst)., hdpe pipe 1" dia. - isi mark. (rate including gst)., jute rope/cotton rope for jhula/kamand. (rate including gst)., water storage tank triple layer (200ltr. cap.) - sintex or eq. (rate including gst)., water storage tank triple layer (500ltr. cap.) - sintex or eq. (rate including gst)., safety helmat - isi mark. (rate including gst)., safety belt - isi mark. (rate including gst)., green cloth for covering of site. (rate including gst)., safety net of size 5m x 10 mtr.(green). (rate including gst)., top wood body 4 four wheel hand cart heavy duty, load capacity: 500kg - 600kg complete as per site in-charge. (rate including gst)., centrifugal hi-flow cms20 monoblock pump 1.1kw/ 1.5hp - havells or eq. (rate including gst)., 2.5 mm copper wire bundle (90 mtr.) (havells or eq.). (rate including gst)., supply of 25mm mild steel wire rope including installation to main mausoleum pinnacle (appr. height 240 ft) complete as per site in-charge. (rate including gst)., hiring charges of electric lime mixer grinder for mortar with operator complete. (rate for 1 cum.). (rate including gst).
Tender For bid to ras bid to ras supply of chemical - jpt pepmix m tuberculosis cfp10 25 microgm , carbonate bicarbonate buffer for elisa ph 9 6 , bovine serum albumin lyophilized powder apercent 96percent agarose gel electrophoresis , polyethylene glycol sorbitan monolaurate tween 20 , sodium chloride 500gm , d plus trehalose dihydrate 50gm 90210 50g , tris base 100gm 252859 100g
Tender For supply of title - supply of 2.1 ch soundbar with true wireless subwoofer, make: lg/sony/samsung , supply of 1 x 8 hdmi splitter/hdmi distribution amplifier supported upto 4k uhd. make- primesol or better dual line cordless telephone set with a backlit display, 16 digits in the display, as per specification hdmi transmitter & receiver over long reach hd base t as per specification smps 5v/3a, suitable for single colour board. specification meet as per rdso specification number rdso/spn/tc/61/2015 rev 4.0 , supply of 1 x 8 hdmi splitter/hdmi distribution amplifier supported up to 4k uhd. make- impression/kanex pro primesol 24 port liu rack mountable with fully loaded with pigtail, connectors and tray make-d-link, r&m, cyrotech or similar straight joint enclosure for ofc fibre cable make-r&m, polycab, similar , supply of lan extender with 4 port ethernet with 230v ac/48v dc working with ac power cord e1 to ethernet convertor (4 e1 & 4x fast ethernet port )make mrotek pine4/teamlink fabio 4 or similar warranty 3-years tool & testing equipment for ofc cable (ofc power meter 1310/150 & ofc power source/genrator 650/1310 nm) with tool box as per tecnical specification no. tec/gr/tx/co1002/02 nov. or latest vacuum cleaner with blower function, 20 liters tank capacity, stainless steel body, wet & dry 1400 watts, 20 kpa high power suction. accepted make eureka forbes ultimo, bosch, philips., supply of 48v-200ah vrla battery, consisting of 24 nos of 2v/200ah cells in factory charged condition inserted in ms rac with inter-cell & inter-module connector as per rdso specs.irs: 5:93/96 with amendment -1 or latest with all accessories insulation tape 20mm x 10m , industrial grade puf seal, size 500 milliliter , gamaxine powder insecticide 5% dp , insecticide chlorpyriphos 10% gp to preven insects from entering the signalling equipment. , silica gel (10 grams) , pvc insulation tape 20mm x 10m , silica gel (10 grams) , ndustrial grade puf seal, size 500milliliter as per annexure. , gamaxine powder , electric kettle make borosil, prestige, philips, bajaj. , thermas flask
Tender For zp 4b dry powder as per astm e 165, it s [zp 4b dry powder as per astm e 165, it should be eco friendly , shall not have any disagreeable odour make - magnaflux or similar warranty period 5 years from date of supply]
Tender For supply of door lock l.h. & r.h. complete to drg.no.ca/dw-1031 alt. nil mat. and specn. as per drg. powder coated as per isc -356 of is -5/2007 colour golden yellow
Tender For auction sale of dunite-size - 40-500 mm (bolders),dunite - size +10-40 mm,dunite size 0-40 mm(rom mixed with powder),dunite (0-10mm) crushed powder
Tender For corrigendum : supply installation testing and commissioning of 01 no of table top powder xrd at school of physics smvdu kakryal katra - supply and installtion of table top powder xrd with detailed specifications as follows:, x-ray generator: max. continuous rated output: 600 w guidance based software system, voltage: 20- 40 kv with increment of 1kv / current: 2 15ma with increment of 1ma (variable voltage and current). ht stability better than +/-0.01% for mains stability +/- 10 %.x-ray tube:cu target with 1000w and k-beta filter, should be upgradable for cr, co & fe.goniometer:high precision, vertical type, goniometer with theta two theta geometry, range: -3 to +1400 or better, radius: 150mm, scanning speed: 0.01 ~ 100 degree/min, max scanning speed: 500deg/min, sollar slit(incident & receiving): 2.5 deg, incident height limiting slit(dhl): open (10mm), necessary software and hardware for diagnostics capable of checking the equipment parameters/ calibration etc.divergent slit:variable to keep the x-ray illumination of sample same from low angle to high angle of 2 theta. detector:high speed silicon strip detector, it should work in 1d mode. also fluorescence reduction mode should be available. cu efficiency 99% samples holder: glass (0.2mm) qty 20, glass(0.5mm)-qty -20, aluminum (20 mmx20 mm) hole - qty 20, low background si sample holder- qty 02software: guidance based software system software should have a provision for the following: 1) all active operations should be controllable through the software 2)simultaneous data collection and data processing facility. facilities for peak search, peak match, and pattern treatment such as data smoothing, background subtraction, 2 correction, 3d multiple pattern display, k 2 calculation and removal, integrated intensity calculation, relative intensity ratio (rir) quantitative analysis and crystallite size. xrd-rietveld analysis. hybrid search / match algorithms which combines the features of peak based and profile based, phase identification techniques. it offers improves, qualitative analysis performance which makes, identification of crystalline phase with preferred, orientation or a complex lattice deformation.computer systems:latest pc along with latest operating system (latest 8.1 or 10), laser colour printer, necessary software for operation and data acquisition, analysiscod-data base:software is compatible with cod (crystallography open database) which is available on internet. (internal /external ) chiller:suitable compact for smooth running of xrd ups: online 6kva with 30 mts. backup.installation and commissioning: the instrument to be installed tested and commissioned by representative of supplier at our premises to the satisfaction of user free of cost.training: the supplier should provide the training on site free of cost.safety:the system should be housed in a high safety standard radiation enclosure as per international norms.warranty: at least one year from the date of installation(the supplier should provide the certificate of successful installation of benchtop xrd from the head of the department of concerned government labs/ institutes. )