Tender For replacement of old conventional type fittings and electrical accessories in sakhi niwas (working women hostel), sector 24, chandigarh. - dsr item no. 1.15 rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group c, dsr item no.1.28 supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required., 3 module, 4 module, 6 module, 8 module, dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no.1.24 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 amps switch, 3 pin 5/6 a. socket outlet, 15/16 amps switch, 6 pin 15/16 a. socket outlet, dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 25 mm, dsr item no. 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no. 1.33 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., s/e of 2 x2 led fitting surface type square type with integral/ non integral driver to be installed on existing surface with the help of rawl plug & screws etc. the fitting should be philips / wipro / bajaj / trilux / jaquar/ havells/ crompton/ panasonic/ lt make only. (as per complete item no. 9 of the dnit)., s/i/t/c of 1x18/20watt. led box type fittings made of crca sheet with 1 nos. led tube rods. the fittings should be installed on existing surface. the led tube rod should be of philips/ wipro/ havells/ bajaj/ crompton/ trilux/ panasonic/ lt/ jaquar make of polycarbonate material only. (as per complete item no. 10 of the dnit)., supply & erection of exhaust fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (as per complete item no. 11 of the dnit)., size 12 sweep 900 rpm with louver of havells make turbo force sp / orient make industrial heavy duty / crompton make exhd 380-6-1/ bajaj make supreme dlx/ usha make turbo hdef only., providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 12 of the dnit)., 63/100 amp 4 pole mccb (thermal magnetic release)., s/e of ceiling fans with copper winding but without regulator complete with aluminium blades, plastic canopies 2 nos. double ball bearing, ms hanging rods, condenser, reels, clamps etc. (as per complete item no. 13 of the dnit)., size 48 1200mm sweep ceiling fan of havells make velocity white / orient make new breeze / crompton make high speed / usha make striker/ bajaj sabse tezz ee only., s/e of enclosure for following rating mccb 3 pole/ 4 pole made out of 16 gauge m.s. sheet. the enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. to complete the job to the entire satisfaction of engineer-in-charge., 100 amp. 4 pole, s/e of led bulk head luminaries weather pro
Tender For goods and services for supply of personal protection equipment in haridwar and rishikesh in uttarakhand under package 10 f - tripod stand with wench for confined space entry supply of goods and related services for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods and related services for each unit of this item shall cover all of the costs for the following:(a) supply of goods: tripod stand with wench for confined space entry: tripod stand for raising, lowering and supporting personnel in confined space entry (manhole) and emergency response situations, complete with winching device, winching cable and built-in pulley system; and(b) related services: inspections and tests, user s manuals and initial user training, after delivery to final destination. performance tests shall be carried out by the supplier for each unit at the final point of delivery. users manuals and initial user training shall be provided by the supplier for each unit at the final point of delivery., safety harness full body belt supply of goods and related services for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods and related services for each unit of this item shall cover all of the costs for the following:(a) supply of goods: safety harness full body belt: polypropylene nylon full body safety belt harness for purpose of fall arrest, positioning, travel restraint, suspension and rescue applications. each unit to be provided with rope grab fall arrester, rope double hook shock absorber lanyard, full body harness, twisted nylon rope with metal fastening rings at each end, anchorage line tool bag, work positioning lanyard, accessory rings and kit bag; and(b) related services: inspections and tests, user s manuals and initial user training, after delivery to final destination. performance tests shall be carried out by the supplier for each unit at the final point of delivery. users manuals and initial user training shall be provided by the supplier for each unit at the final point of delivery., safety rubber gum boots with steel toes (pair) supply of goods for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods for each unit of this item shall cover all of the costs for the following:supply of goods: safety rubber gum boots with steel toes (pair): each unit shall comprise one (1) pair of water proof and anti-slip; chemical, oil and acid resistant; puncture and tear resistant; gum boots with high knee safety designed for maximum safety. reinforcement at the heel, ankle and shin. boot sizes range: 5 to 11 uk size (supplied in 1:2:2 proportions)., safety rubber gloves (pair) supply of goods for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods for each unit of this item shall cover all of the costs for the following:supply of goods: safety rubber gloves (pair): each unit shall comprise one (1) pair of gloves. cut resistant safety gloves with good wear comfort, chemical resistance., safety helmet (standard) supply of goods for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods for each unit of this item shall cover all of the costs for the following:supply of goods: safety helmet (standard): safety helmet shall be compliant with indian standard is 2925,1984. shell shall be dome shaped, no metallic components are to be used. helmet material: uv resistant hdpe thermoplast. helmet suspension: six-point plastic head
Tender For supply of boq item bid - soap laundry , super brigth hd ultra , super bright el , napthalene balls , adhesive syn resin araldite ay 103 , power cleaning scouring , pins cutter split steel , paint rfu fine black , paint rfu fine blue , paint rfu fine yellow , paint rfu fine white , paint rfu fine red , fevicol sr 998 , polish metal potassium liquid 250ml , insulation tape electrical luminous tape , broom sweeping , broom country , battery dry 1.5v no 6 , flannelette 10cm wide
Tender For bid to ras corrigendum : providing of professional painting service - wall wood metal cemented item; interior walls, exterior walls, wall painting; grills, doors, windows
Tender For supply of prevailing torque type all metal hex nut m16 as per din 6925-property class 10 t o is:1367 (part-8)-2002,a3b. item to be supplied by rdso approved vendor only. ]
Tender For supply of dual mobility hip implant with oxidised zirconium metal liner, uhmpe liner, titanium cup, c ocr head & titanium ha coated double taper stem.[ai(2024-25) , item code no.s-61666, sl no.1647 ]