Latest underground water tank Tenders | Government underground water tank Tenders

Corporations And Associations And Others

CTN :45328794

02 Jun, 2026 19.95 Lacs

Delhi - Delhi

Tender For providing t and p items and garden tools for ward no. 171 (cr park) south zone - providing t & p items and garden tools for ward no. 171 (cr park) south zone., supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigssaw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16"pole type: light weight telescopic tubular aluminum alloy extendable poleno of positions for pole heightadjustment: 10 positionslocking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration, on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle: should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 525 to 549minimum cut height 20 millimetermaximum cut height 80 millimeterblades hardened steelnumber of blades 1number of positions for cut height adjustment 6number of levers for cut heightadjustment: single levernumber of wheels 4front wheel size 203 millimeterrear wheel size 250 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity 1.4 ltr., supply of synthetic enamel paint in all shades as per required and direction of officer-in-charge., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgc

CTN :45326580

09 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of instrumentation and control engineering practices (equipment) - motorized control valve trainer kit signal input:4 20 ma or 0 5 v valve characteristic:equal percentage stem movement:maximum 10 mm or 12 mm body material:cast iron trim material:ss 316 trim size: cv value:2 or 5 actuator:servo motor supply voltage:230 v ac, 50 hz connection: flanged or screwed type. digital indicator provided potentiometer provided for varying the 4 20 ma input signal, saybolt viscometer apparatus glass type: high-quality borosilicate glass tube. control type: manual energy regulator control. shape: rectangular bath with cylindrical test chamber. temperature range: ambient to 240 c oil bath temperature. humidity: up to 80% rh (non-condensing). power supply: 230 v ac, 50 hz. measuring range: 32 to 1000 sus(saybolt universal seconds). accuracy: as per astm d-88( 0.2 seconds). mounting type:benchtop. capacity:one cup(approximately 60 ml). control mode:manual operation. port size:standard orifice sizeas per astm d-88. features:oil bath with heater,thermoregulator,insulated outer body,orifice,receiver flask, control valve trainer kit three pneumatic control valves provided with individual hand valves valve characteristics: i) quick opening ii) linear iii) equal percentage. valves connected in parallel configuration for comparative study. pneumatic operation with air supply connection. control valve assembly mounted on trainer panel. power supply: 230 v ac, 50 hz., water level measurement trainer kit using capacitive type transducer tabletop model with transparent acrylic tank of approximately 50 cm height. capacitive type level sensor for continuous level measurement. sensor output: (4 20)ma and/or (0 5)v with built-in signal conditioning. vertical pump for water circulation from sump to tank. flow control valve, overflow, and drainage arrangement. digital display for water level indication in cm. power supply: 230 v ac, 50 hz, single phase. in-built regulated dc power supply for sensor and control circuit. mounted on powder-coated ms frame for laboratory use. suitable for calibration and study of capacitive level measurement.

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of self recording rain gauge , maximun minimum thermometer digital , screw gauge , prismatic compass with stand , auto dumpy level with stand and staff , abney level , robotic total station 1 inch accuracy bluetooth auto target , kerosene or gas stove or electric hot plate , ghat tracer , pegging rod , optical square 90 degree , ranging rod 3 mtr long , high precision binacular , temperature gun for checking bituminous surface works , sample tray enamelled , vibrating wire , termperature sensor , portable indicator , steel tape 5m , standard pyconometer of 50 ml , digital hygrometer , post hole auger with extensions , rodo meter - high precision wheel odometer , hot plates 200 mm dia 1500 watt voltage 220v to 230v , circular plates of 250 mm dia , sampling pipettes fitted with pressure and suction inlets, 10 ml capacity. , sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer , ennore standard sand 25 kgs bag , weighing machine 0 kg to 10 kgs , mould 15cmx15cmx15cm for compressive strength of concrete , digital vernier calipers accuracy 0.001 mm , thermometers mercuryinglass thermometer 0 to 250 c mercury-in-steel , glass thermometers range 0 degree c to 100 degree c 100 degree c , mortar cube 70 pt 6 mm , cbr plunger with settlement dial gauge holder , ring and ball app for softening point , specific gravity test bottle with vaccum pump , tripod stands for holding dial gauge holder , metallic laboratory thermometers range up to 300 c , spacers disc 148 mm dia 47.7 mm ht. with handle , comprising beakers capacity 1000 ml glassware , pipettes capacity 50 ml glassware , perforated plate brass , metallic thermometers range up to 300degree c 300 degree c , specific gravity and water absorption testing machine , marshall sample mould , stop watch one and half sec. accuracy , field density apparutus complete setsand relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion te

State Government

CTN :45308863

01 Jun, 2026 14.70 Lacs

Mumbai - Maharashtra

Tender For special repairs to reconstructed building known as ganesh darshan , 28-42, sant sena maharaj marg, mumbai under c-3 division (repairs to underground water tank, duct area and the rear portion)

Central Government And Public Sector

CTN :45289741

29 May, 2026 2.05 Lacs

Chandigarh - Chandigarh

Tender For cleaning of overhead and underground water tanks in bsnl staff quarters in sector 27 sector 30 te building sector 20 te building sector 17 te building sector 49 te building and nodal centre buildings ia ramdarbar chandigarh for year 2026-27

corporations/Associations/Others

CTN :45287060

09 Jun, 2026 48.99 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For fire fighting system installation and commissioning along with construction of underground water tank and machine room complete work at electricity transformer repair workshop muzaffarnagar, dist muzaffaranagar.

Central Government / Public Sector

CTN :45289444

05 Jun, 2026 9.79 Lacs

Viramgam - Gujarat

Tender For construction of dual chamber underground water tank with pumping arrangement for existing overhead water storage tank at wrpl viramgam.

State Government

CTN :45313626

01 Jun, 2026 71.88 Lacs

Delhi - Delhi

Tender For eor to central jail no.3, tihar, new delhi. (sh- construction of new underground water tank and repair of existing adjacent water tank in central jail no.3).

CTN :45077014

22 May, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : e – tender for the purchase of medical college equipment for directorates of medical education, government of chhattisgarh - barometer (mercury based instruments to be replaced with other alternatives), filter, pasteur chamberland, complete set, filter, berke fed, hydrometres, spirit, hydrometres, milk, hydrometers, wet and dry bulb, incubator, electric (can be procured from microbiology), museum jars, balance analytical 200 gm., balance for weighing food stuff(capacity 2 kg)., centrifuge clinical, weighing machine adult, baby weighing machine, salters baby weighing machine, harpender calipers (for skinfold thickness), height measuring stand, ice lined refrigerator (i.l.r.) (at health centre), dissecting microscope, microscope oil immersion, autoclave (can be shared with pathology/microbiology department), chloroscope, horrock’s apparatus, muac tapes, haemoglobinometer, bp apparatus (digital), stethoscope, kata thermometer, globe thermometer, anemometer, sound level meter, soil testing kit, water sampling bottle from any depth, needle shredder, vaccine carrier, craft water testing kit, protective devices for occupational safety, ear muffs, ear plugs, safety helmet, goggles, safety boots, swine flu kit, gloves, triple layer surgical mask, high efficiency mask, long sleeved cuffed gown, protective eye wear, cap, disposable delivery kit, treatment kits as per national health programs, glucometer, treatment kits as per national health programs, glucometer, first aid kit, spirometer, otoscope, ophthalmoscope, table with marble or stainless steel tops with a minimum size of 6’ x 2’ x3’, tables with marble or stainless steel tops - half standard size, drill machine, hand saw, preferably metal, band saw for sectioning body and limbs, brain knife, mortuary cooler with arrangement to keep 4 body, storage tank to hold 10 cadavers, static/movable, durable tank with input and output, facility with lid, plastic tanks for storing soft and dissected parts, trolley table (steel), x-ray viewing lobby, charts, diagrams, models, slides etc., dissecting instruments for cadaveric dissection, meat cutting machine for thin body sections (trans and vertical) for gross anatomy, sectional study, embalming machine, microscopes, monocular, dissection microscope, microtomes, rotary (optional), microtomes, sledge, large cutting, cabinet for slides (1000), incubators, paraffin embedding bath, hot plates for flattening sections, hot air oven for drying slides (45 oc), refrigerators (minimum 165 litres), marking pencils, articulated skeleton set, bones (dis-articulated) sets, sherrington starling kymograph (electrically driven), myograph stand, inductorium, simple key, short circuiting key, pohl's commutator, vibrating interrupter, muscle trough, muscle lever, muscle grip of femur clamp, hook and weight set, heart lever (simple &starling), enamel tray, low voltage unit for tapping 2 and 4 volts for stimulation, electromagnetic time marker, tuning fork time marker 100 hz and 125 hz 2 each, electrodes, x-blocks, spirit lamps, marey's tambour, microscopes, oil immersion, demonstration eye piece, double demonstration eye piece, stage incubator, westergren's pipette for e.s.r. on stand(with space pipette), wintrobe’s pipette for esr and pcv with stand, perimeter pristely smith s/lp.984 b & t, digital perimeter, hemoglobin-meter sahli's or hellige (with spaces), hemocytometer, sphygmomanometer (digital) (mercury based instruments to be replaced with, suitable, alternatives), stethoscopes, stethoscopes, demonstration with multiple ear pieces, polygraphs, venous pressure apparatus, spirometer, ordinary, digital spirometer, gas analysis apparatus, halden's student type, van slyke's apparatus manometric, gas analyser automatic for co2, o2, n2, douglas bag, complete, basal metabolism apparatus, mosso'sergograph, clinical thermometer (mercury based instruments to be replaced with suitable, alternatives), compass aesthesiometer, thermo-aesthesiometer,

CTN :45117105

01 Jun, 2026 NA

Kharagpur - West Bengal

Tender For distribution transformer of rating 500 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, the type of tap changer for variation of hv voltage from +5% to -15% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, confirming to is 1180 (part 1): 2014with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 of is 1180 (part 1). terminal agreement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall confirm to is/iec 60137. the low voltage bushings (4 nos.) shall confirm to is 7421. suitable cable-end box along with cable entry hole glands is to beprovided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is 1180 (part 1) latest. (ii) routine test certificates as per is: 1180(part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d), (e) of is: 1180 (part 1) latest. [ warranty period: 30 months after the date of delivery ]

Underground Water Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

State Government

Central Government And Public Sector

corporations/Associations/Others

Central Government / Public Sector

State Government