Latest upvc casing Tenders | Government upvc casing Tenders

CTN :39699891

24 Mar, 2025 20.00 Lacs

Udaipur - Rajasthan

Tender For rate contract for supply of electric items for fy 2025-26. - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 3700 lm, led street light fixture with minimum lumen output 5600lm, led street light fixture with minimum lumen output 8700 lm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure a attached with this bsr 6sqmm 2core, 10sqmm 2core, 6sqmm 3core, 10sqmm 3core, providing & fixing of ac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, din rail mounting type including making connections, testing etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 3 pole power contactors with following ac 3 rating 40amp, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection, programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . one day reserve (analog type ), p & f of 240 v electronic on - off timer 3 -30 sec / 12 - 120 sec including making connection etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., p & f of 415 v electronic on - off timer 3 -30 sec / 12 - 120 sec including making connection etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., providing & fixing of 240/415 v ac mcb with positive isolation of 10 k

State Government

CTN :39667524

19 Mar, 2025 4.90 Lacs

Valsad - Gujarat

Tender For providing and fixing furniture, lab equipments at newly constructed veterinary dispensary dharampur, dist-valsad-gang seater providing & supplying of gang seater(three seater) made out totally of 16swg perforatedsteel sheet and back and framing stainless steel 15mmcrc pipes structure of required shape, resting on 50mmcrc pipes as per image and directed by the architectand approved by the engineer in charge.1.00 no 9595.00 9595.002 executive table providing & supplying executive tablehaving size of 1800 mm x 750 mm table top with 25mm pre laminatd board top with edge pvc beading inframing & leg support with plb laminated with drawersand filerack etc. complete with necessary fixtures &fasteners of standard make as per detail drawing andimage approved and as directed by the architect andapproved by the engineer in charge.1.00 no 24745.00 24745.003 executive high back chair providing and supplyinghigh back chair made out of aluminium die cast in 5pronged base, polyester mesh in back with pu lumbarpad which can be adjustable by the user, high densityinjection molded pu with leather upholstery in seat panwith center tilt mechanism with pu padded heightadjustable arm rest. the height adjustment of the chairshould be done with gas lift with 100 mm travel for quickand comfortable height adjustment. it should bemaintenance free and should be tested for over 50,000cycles using stringent quality assurance system. the gasused in the cylinder should be non-toxic, non-flammable.the tilt mechanism should made up of cold-rolled carbonsteel sheets as per technical specifications mentionedabove. the mechanism should be with 4 position lockingmechanism. polyurethane armrests confirming to isstandard and fabric as per the technical specificationsmentioned above should be provided in the chairs etc.complete as per chair of approved hb, as per image andas directed by the architect and approved by theengineer in charge.1.00 no 12625.00 12625.00shedule b page 1bill of quantitiesitemsno.description of item (with briefspecification and reference to book of specifications)quantity unit rate infigures rs.amount1 2 3 4 5 64 providing & supplying conference room mid backchair seat size 21" w x 19 " d seat height 19" d x 22" hoverall : dimensions 21" w x 19" d x 34" h, soft pvcmaterial fabric, normal padded seat & back. foammoulded seat. hight quality pp arm rest. high gaugestainless steel base of nilkamal brand or equivalent.product name:- nilkamal contract 02 soft pvc with arm,black. as directed by architect and approved by theengineer in charge.9.00 no 3232.00 29088.005 s. s. dustbin providing & supplying s. s. perforateddustbins having size of 8 in. diameter & 12" height etc.complete as per image & directed by the architect andapproved by the engineer in charge.2.00 no 1100.90 2201.806 providing & supplying and fixing magnetic whiteboard/ marker board for office, home & school , heavy-dutyaluminium frame, 5x4 feet with decorative alluminiumborder with 2-way hanging options having size of 1500(l) x 1200 (w) complete with all necessary fixtures &accessories as per image and directed by the engineer incharge.4.00 no 6262.00 25048.007 providing and fixing computer table with withkeyboard slider and cpu rack and antiskid leveller atthe bottom, wooden texture smooth/matte finish, make:-particle board (high grade prelam engineering woodwith natural wood grain finish), 103d x 40w x 72.5hcentimeters dimensions, etc. as directed byarchitecture and engineer in-charged.4.00 no 7272.00 29088.00shedule b page 2bill of quantitiesitemsno.description of item (with briefspecification and reference to book of specifications)quantity unit rate infigures rs.amount1 2 3 4 5 68 mid back chair providing and supplying mid back chairmade out of aluminium die cast in 5 pronged base,polyester mesh in back with pu lumbar pad which can beadjustable by the user, high density injection molded puwith leather upholstery in seat pan with cen

Central Government/Public Sector

CTN :39697626

04 Apr, 2025 NA

Solapur - Maharashtra

Tender For supply of 63 mm cpvc pipe class ii quality , 63 mm cpvc coupler class ii quality , 63 mm pvc pipe 4 kg per cm2, class ii quality , 75 mm pvc pipe 4 kg per cm2, class ii quality , 90 mm pvc pipe 4 kg per cm2, class ii quality , 110 mm pvc pipe 6 kg per cm2, class ii quality , 63 mm pvc elbow class ii quality , 75 mm pvc elbow class ii quality , 90 mm pvc elbow class ii quality , 110 mm pvc elbow class ii quality , 63 mm pvc t bend class ii quality , 75 mm pvc t bend class ii quality , 63 mm pvc coupler class ii quality , 75 mm pvc coupler class ii quality , 90 mm pvc coupler class ii quality , 110 mm pvc coupler class ii quality , 63 mm pvc ball valve class ii quality , 75 mm pvc ball valve class ii quality , 90 mm pvc ball valve class ii quality , 110 mm pvc ball valve class ii quality , 63 mm flush valve class ii quality , 1.0 liter pvc adhesive solution high quality, mnc product , 110 mm to 90 mm pvc reducer class ii quality , 90 mm to 75 mm pvc reducer class ii quality , 75 mm to 63 mm pvc reducer class ii quality , 110 mm tail piece class ii quality , 90 mm tail piece class ii quality , 75 mm tail piece class ii quality , 63 mm tail piece class ii quality , 110 mm end plate with nut bolts , 90 mm cast iron end plate with nut bolts , 75 mm cast iron end plate with nut bolts , 63 mm cast iron end plate with nut bolts , m seal good quality , hacksaw blades 300mm heavy duty, , teflon tape good quality , insulation tape good quality , 16 mm plane lateral class ii quality , 16 mm inline drip line with 1.5 ft distance between 2 emitters class ii quality , 4 lph, pc dripper class ii quality brand only netafim , 16 mm joiner class ii quality , 16 mm lateral valve class ii quality , 16 mm t bend class ii quality , 16 mm gromet class ii quality , 16 mm take off class ii quality , 16 mm end cap class ii quality , goof plug class ii quality , punch for dripper fitting , hand drill for takeoff fitting

CTN :39458206

18 Mar, 2025 NA

Shimla - Himachal Pradesh

Tender For corrigendum : supply of boq1 boq1 - the overall size of chair shall be : width 660mm , depth 660mm & height 1250 to 1350 mm. seat size shall be : width 490mm, actual depth520mm, effective depth 430mm and height 475mm to 575mm. width of the back shall be 425mm at bottom & lumbar level 440mm & min480mm at shoulder level. back height shall be 690mm as measured from seat level. the chair shall be supplied with high quality mesh at theback. back outer shall be injection moulded with nylon gf30% material. seat should be made up of foam pre moulded at 55 kg/m3 density &hardness of 25+ 3kgf at 50% deflection conforming to is 3400.the chair shall be supplied with dynaflex two piece back construction withis20d mesh upholstred. back shall be provided with 260mm width, 160mm height and 50mm height adjastable headrest thickness of seatfoam shall be 55 mm. seat shall be upholstered with micro fabric 100% polyster 180 gsm having abrasion > 50000 cycles fire rated fabricconfirming to bs en 1021. plywood used shall be 12mm thick 9 ply hot pressed. the chair should be provided with synchro tilt mechanism(bio snchyro mechansim) allowing 360 degree revolving movement along with height adjustablility & tilt tension. the mechansim shall allowseat to back recline ratio of 2:5. the gas lift used shall be class 4 tested as per ansi bifma standards. height adjustable arms to be proviedoperated through button made of delrin p 500. arm pad material shall be polyurethane with 2mm metal insert. nylon base having pcd of660mm five pronged base made up of pa6, 30% glass filled reincforced with bottom ribbing to be provided. 50mm dia twin castors with pa6material to be provided.tolerance of +/- 5mm to be considered for product sizes i.e length, depth & height and tolerance of 5% to beconsidered in pipe thickness & pipe sizes. , the overall size of chair shall be, total height 855mm, width 620mm,depth 550mm, seat depth 470mm seat width 475mm seat to back height440 and back width shall be 460mm. seating height shall be 460mm.seat should be made up of foam pre moulded at 55 kg/m3 density.hardness of 25+ 3kgf at 50% deflection conforming to is 3400. seat shall be uplhostered with micro fabric 100% polyster 180 gsm abrasion >50000 cycles. no flamming or progressive smoldering within one hour of placement of the cigarettes. fire rated fabric confirming to bs en1021 (match) should be used.the back frame design shall be made from 14g bright steel rod in an exclusive profile for sturdiness andergonomic comfort. the steel frame shall be powder coated to 40-50 microns. the back frame shall offered in special mesh finish in black &grey finish. upholstered with an-70 (black) / an-75 (grey) mesh. special design mesh 100% polyester with 320 gsm. abrasion resistance ->50000 confirming to iso 12947-2. chair shall have fixed armrest with size of 190mm made of with nylon 30% gf.the frame shall be made outof erw tubes with 25 mm diameter with 2.1 mm thickness pipe conforming to is 4923. frame shall be welded by co2 welding process foruniform finish conforming to is 816.frame shall offered with powder coat finish to provide an attractive finish. it shall be in black colour. thepowder coating pre-treatment shall carried out with three in one chemical. after pre-treatment process, the components shall powdercoated for better adhesion of paint. the frames shall powder coated with epoxy polyester powder to the thickness of 40-60 microns as per is101 and oven baked at 180.leg bush shall be provided molded with ppcp.tolerance of +/- 5mm to be considered for product sizes i.elength, depth & height and tolerance of 5% to be considered in pipe thickness & pipe sizes., the overall size of the centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick prelaminated particleboard of approved shade all the edges of discussion surface shall be provided with machine pressed 2mm thick pvc lipping glued withhotmelt eva glue

Central Government/Public Sector

CTN :39662671

18 Mar, 2025 NA

Bhusawal - Maharashtra

Tender For supply of resuscitation kit: kit contents and specification: face mask size- 00,01,2,3,4,5,number of face masks in a kit- 2 nos of each size, material of mask (non-toxic and non-allergic, medical grade)- silic on coated pvc, face masks are transparent with good quality, air seal facility- yes, self inflating resuscitato r bag- yes, material of resuscitation bag- neoprene, resuscitation bag capacity (ml)- 1400 to 2000, number of resuscitation bags in a kit- 1, construction of resuscitator bag- double wall type, mask and resuscitator b ag are autoclavable to 134 deg c- yes, built-in pressure limitation facility for the resuscitator bag-.yes, non- rebreathable one way valve- yes, provision of integrated handle in resusitator bag- yes, connection for ma nometer port-yes, reservoir bag- yes, material of the reservoir bag (latex free, medical grade, non-toxic an d non-allergic)- polyvinyl chloride (pvc), product to be similar to product id-5116877-80270429729. [ warr anty period: 30 months after the date of delivery ]

CTN :39649227

25 Mar, 2025 10.00 Lacs

Balotara - Rajasthan

Tender For supply, installation, testing and commissioning of various electric item on annual rate contract - supply of din rail mounting contactor and accessories confirming to iec 61095 with following description and configuration in existing distribution board / sheet including making connections, testing etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr modular contactor 40a - 3no, supply of wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor as required. for additional technical parameters of product / work refer annexure a attached with this bsr4.0 sq.mm, 6.0 sq.mm, 10.0 sq.mm, supply of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 mperes including making connection, programming conforming to iec 0730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer exure "a" attached with this bsr.one day & week reserve (analog type ), one day & week reserve (digital type ), supply of 240/415 v ac mcb with positive isolation of 10 ka breaking capacity (b/ c/d tripping characteristic as per type of load and site requirement) 4 kv impulse withstand voltage, isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80 a & above rating including making onnections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr. single pole mcb (with b/c curve tripping characteristics) 0.5 a to 5 a rating, 6 a to 32 a rating, 40 a rating, 63 a rating, providing & fixing of 240/415 v isolator isi marked is:13947- iii/conforming to iec 60947-3, suitable for ac22a utilization category, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering overall poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. ip 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr. double pole isolator 30 a / 40 a rating, 63 a rating, triple pole isolator 40 a rating, 63 a rating, sitc of single stage, water cooled, high speed (2880 rpm), horizontal, centrifugal, openwell submersible pumps set pre filled with coolent water and fitted with mechanical seal - t/c vs t/c, thrust bearing shall be of carbon + s.s.the stator body of single phase pump shall be of ss and rest of all shall be of cast iron. all casting parts should be cathod electro deposition (ced) coated and other construction material should be confirming to is : 14220: 2018 . the overall performance of pump shall confirm to bee energy efficiency level of 3 star. valid bee certificate from oem must be submitted for the same. motor should be ie2 class as per iec 60034-2-1: 2007, iec 60034-30: 2008, & is12615:2011, including making connection etc as required complete in all respect. oem shall have submit nabl / cpri / erda accrediated lab type test certificate before executio

State Government

CTN :39266817

01 Apr, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of various consumable items for workshop section at wtps. - mini angle grinder 100 mm, nylone safety belt,(with 3-mtrs.polythene rope)., hss hacksaw blade size 1/2 inch x12 inch x18 tpi, steel measuring tap 3 m long, measure tape 5 meter, freemans make measure tape 30 meter, hacksaw frame suitable for 12 inch hacksaw blade, champion make teflon tape 1/2 inch size, portable single phase welding machine. (light weight 10 kg), portable three phase welding machine. (light weight 15 kg), metal cuting bimetal bandsaw blades with toothed strip of high speed steel and backing strip of spring steel, size - 8 feet 3 inch x 3/4 inch x 0.032 inch ( l x w x t ) with 10-14 t.p.i., double ended spanner set dep 12, ring spanner set model 1812 taparia make, single ended open jaw adjustable spanner, generally confirming to is 6149-1984 grade-ii, phosphate finish, product no. : 1170-6, adjustable spanners 205 mm length ,least max. opening 26 mm , chrome plated, with soft grip, adjustable spanners , 305 mm length ,least max. opening 35 mm, chrome plated, soft grip, taparia combination plier, product no.1621-8,210 mm, pvc nylon braided pipe size- 1/2 inch, heavy duty pipe wrench, length -200 mm, least max opening-33 mm, taparia product no- hpw 08, heavy duty pipe wrench product no hpw 12 taparia make, heavy duty pipe wrench, length -450 mm, least max opening-73 mm, taparia product no- hpw 18, tools bag (taad patri type, thick cloth) with 3 to 4 pockets for artisian tools having size 16 inch x 4 inch x 10 inchapproximate, bi-metal hacksaw blade having 12 inch x 1/2 inch x 18 tpi, hand drill machine size 13mm, rubber element/ spider for love joy coupling size-l-225, ci ball valve size 1/2 inch bsp, 150, internal thread at both end, britelite 1200 meters long rang torch rechargeable led flashlight with charger., holdtite liquid jointing compound (500 gms/pkg), rustolene, rust remover wd 40, 400 ml / bottle, hss ground thread hand tap set m 6x1, hss ground thread hand tap set m 8x1.25, hss ground thread hand tap set m 10x1.5, hss ground thread hand tap set m 12x1.75, allen key set of size 1.5 to 10 mm, spirit level - size: 12 inch accuracy 0.5 mm with magnet, hand lamp holder with 15 mtr wire and protection glass, ms love joy coupling size l-150, love joy coupling l-190, love joy brand jaw flex couplingsize-l-225, ms nipple (heavy duty)size 1/2 inch x 4 inch lengthbsp std threads, gun metal gate valve size 15 mm (1/2 inch), is-778, class-i, screwed female end., mitutoyo make dial gauge with magnetic stand : 0-10mm, vernier caliper mitutoyo make,size- 0- 300 mm, aluminium wall mounted extension ladder, size: 12 feet and extended up to 21 feet approx., pad lock, ms flange, ansi/asme b 16.5, class-150, size: 100nb., ms flange, ansi/asme b 16.5, class-150, size: 150nb., chain pipe wrench, taparia product no: cpw 06, length:1000 mm, suitable for pipe dia. 150 mm, chain pulley block cap-1 ton,light weight

CTN :39544150

24 Mar, 2025 NA

Agartala - Tripura

Tender For rate contract for supply of medical and surgical consumable items at agmc and gbp hospital, agartala - medical & surgical consumable articles (details specification & quantity mentioned in dnit), absorbent cottonsize: 500gm., abdominal sheetsize: 228 152cm, adhesive tape/plastersize: 10cm 10m, adhesive tape/plastersize: 2.5cm 5m, adhesive tape/plastersize: 5cm 5m, adhesive tape/plastersize: 7.5cm 5m, air mattresses(size: 36 x 72 ), special feature-antibacterial. colour-brown. material-polyvinyl chloride (pvc). included components - air mattress. product care instructions-hand wash only. number of items-1. item firmness description- firm. water resistance level -water resistant. coil type-continuous coil. item thickness-8.9 centimetres., bandage cloth(100cm x 20mtr), bio degradable plastic bag (red color)size: 24 x 26 .all bags must have bio-hazard symbol.thickness: 75 microns.weight capacity: up to 30-35 kgs with barcode facility as per bmw rule 2016., bio degradable plastic bag (yellow color)size: 24 x 26 .all bags must have bio-hazard symbol.thickness: 75 microns.weight capacity: up to 30-35 kgs with barcode facility as per bmw rule 2016., bio degradable plastic bag (blue color)size: 24 x 26 .all bags must have bio-hazard symbol.thickness: 75 microns.weight capacity: up to 30-35 kgs with barcode facility as per bmw rule 2016, bio degradable plastic bag (black color)size: 24 x 26 .all bags must have bio-hazard symbol.thickness: 75 microns.weight capacity: up to 30-35 kgs with barcode facility as per bmw rule 2016., blood bag tube stripper, colostomy bag25 x 14 cm. hole diameter 3 cm., corrugated rubber sheet, crepe bandagewide: 6 cm x stretched length: 4 mtr., crepe bandagewide: 10 cm x stretched length: 4 mtr., crepe bandagewide: 15 cm x stretched length: 4 mtr, cannula for intravenous access and arterial linessize: 20g, closed et suction catheters size-6fr, closed et suction catheters size-8fr, closed et suction catheters size-10fr, closed et suction catheters size-12fr, closed et suction catheters size-14fr, chest electrode, (disposable)type: disposable electrodesnumber of sheets per pack:100warranty:1 yeardimension:(7.1x5.9x2.3) inchesweight: 150 gm., clip arm electrode for ecg, catherisation kitkit contain with forceps : 1 pc. gauze swab: 6pc. hand towel: 50*50cm. kidney tray: 20*90c m*300ml: 1pc. gloves:1 pair. ot cut sheet green 15*15cm: 1pc. dia inner hole: 1pc. sterile laminated sheet (50*50cm: 1pc. collection beg: 1 pc. drap sheet 50*80cm laminated sheet 12cm dis inner hole, double side tape): 1pc. sterile., disposable face musk, disposable mask, disposable syringesize: 2ml., disposable syringesize: 3ml., disposable syringesize: 5ml., disposable syringe with safety needle 2ml, disposable syringe with safety needle 3ml, disposable syringe with safety needle 5ml, disposable syringesize: 50ml, draw sheet, dressing drumsize: 11 9 ,, dressing drumsize: 12 9 ,, dressing drumsize: 9 9 ,, enema syringesize: 100 ml., eye sheet, eucalyptus oilsize:500 ml, elastic base adherent bandagelatex free, poly acrylic base adhesive, size: 10cm x 4/6 meter., edta vial, face musk made of cloth2 to 4 layers of plain weave cotton or flannel, at least 100 thread count., foleys cathetersize:5., foleys cathetersize:8., foleys cathetersize:12., foleys cathetersize:14., foleys cathetersize:16., foleys cathetersize:18., fistula needle, gauge clothsize: (100cm x 20mtr)., glass syringesize: 50ml., glass syringesize: 20ml., glass syringesize: 10ml., glucometer, glucometer strip, hot water bagsize- 200x270mm(1litre). shape -rectangular. material-rubber. type-ribbed on one side. pattern-plain., hypodermic needlesize: 23g., hypodermic needlesize: 24g., i.v. cannula/intra-veneous needlesize: 18g., i.v. cannula/intra-veneous needlesize: 20g., i.v. cannula/intra-veneous needlesize: 22g., i.v. cannula/intra-veneous needlesize: 24g., infant feeding tubesize 6, paediatric, infant feeding tubesize 8, paediatric, infant feeding tubesize 10, paediatric

State Government

CTN :39532068

21 Mar, 2025 12.43 Lacs

Jamnagar - Gujarat

Tender For supply electrical consumable items for emd-3 bop & lighting section. - crc-226 contact cleaner in 415 ml/300 gram spray bottle., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, test leads (probes) for digital multimeter, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, led torch, pvc twin wire 2.5mm sqr., flexible wire 2-core, 2.5 sqmm, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flat cable 3 corex4 sqmm with copper conductor for submersible motor, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, wolf make air blower, vernier caliper "mitutoyo" make,size- 0- 300 mm, screw driver (tester) taparia product no:818.special with neon bulb,generally confirming to is 5579-1985 grade - ii, yellow handle,, tester type screw driver (special with neon bulb) generally confirm to is-5579-1985, grade: ii, handle- yellow colour, taparia product code-813, overall length 130 mm, combination plier, insulated with thick c.a. sleeve with joint cutter, generally confirming to is 3650-1981, product no. 1621-8., double ended fix spanner sets contant-6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32mm(12 nos),product no:14 (b) dep12, double ended ring spanners sets, ,contents- 6x7 , 8x 9, 10x11, 12x13, 14x15. 16x17 , 18x19, 20x22 , 21x23, 24x27, 25x28, 30x32 mm., socket set 1/4 " square drive(sockets-4,4.5,5,5.5,6,7,8,10,11,12,13,141/4,t20,t25,t30,t40,accessories-a733,a743,a753,a773,a703,a715), allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, bolt cutter, taperia make, length- 300mm, product no-bc-12, hydraulic hand operated crimping tool capacity : 50 to 1000 sq mm with changable hexagonal dies sets ,suitable for cu / al cable, crimping tools, capacity: 6 mm2 to 50 mm2., digital clamp on meter lcd display with backlight, 3-3/4 digit., din rail mounting channels, mcb 3 phase,4 pole, 63 amp 440 v ac 50 hz 10 ka

Central Government/Public Sector

CTN :39429677

14 Mar, 2025 1.20 Lacs

Bhopal - Madhya Pradesh

Tender For tender for supply of items required for automobile lab 2 - output voltage 12 and 24 volts- compatibility 12v car batteries and 24-v commercial batteries- automatic detection battery types whether 12v or 24v- input voltage 230v on 50 hz-protection class ip 65 , led rechargeable torch light- overcharge protection- 250 lumens 3w torch and 1w sidelight- li-ion battery with charging cable-power source - 5v dc- battery cell composition - lithium ion , single core hrfr pvc insulated flexible cables 2 and half sqmm- color red - lenth 90 meter- test voltage 1100 volts-rohs compliant-core single core multi string , single core hrfr pvc insulated flexible cables 2 and half sqmm- color black - lenth 90 meter- test voltage 1100 volts-rohs compliant-core single core multi string , 100kg commercial weighing scale high quality platform size 300cm x300 cm- maximum weighing capacity 100 kg- certification yes iso certified with calibration/ verification certificate- accuracy precision 10 gram , grit dual side grit 240 and 800 -honing stone with non-slip base , grit dual side grit 100 and 320 -honing stone with non-slip base , colour black- included components cartridge- material thermoplastic elastomers- pattern facepiece respirator- size m- style respirator-niosh approved , cartridge suitable for above mentioned mask - niosh approved , filter class n95- size one size - material cotton- style cartridges-features a n95 cotton filter can be used with cartridges- fit for above mentioned masks , 15pcs drill brush attachment set power scrubber cleaning for car drill machine brushes for cleaning abs plastic drill brushes for cleaning with extension rod- type versatile 15-brush set , ms square profile pipe 25mmx25mm thickens 2.5 mm- size 25 mm x 25 mm- thickness 2 and half mm - length 6 meters- material isi mark mild steel , product type castor wheels- material mild steel body with nylon wheels- load capacity 600 kg- mount type swivel type- height 50 mm-lock type manual - wheel dimension 1 inch , material alloy steel- colour red- load capacity 600 kilograms- material alloy steel , carbon steel furniture lifter with heavy duty roller pads- model name furniture dolly with moving heavy furniture tool set 360 degre shift wheels- load capacity 300kg max capacity- product , heavy duty bed castor wheels for furniture counter with poly carbonate wheels- type heavy duty- wheel size 50 mm- no of wheels 6 wheels each- top plate rotation 360 degree- material metal- load capacity 600 kg quantity set of 4 wheels , retractable leveling machine casters wheel - heavy duty machine retractable casters wheel loading capacity 50 kg- mounting type plate mount- caster type swivel- material ivory powder , enterprise handheld ground station smart controller hdmi combo hd smart 7 inch video transmission 4g ram 64g rom 4g - 64g android - item type controller- channels 16 physical channels 16 communication channels- transmission range 15 km , 3-axis assembled brushless gimbal frame with motors and storm 32 controller for rc drone- type drone gimble- specification t brushless motor motor models 2206 - driver board storm32bgc- working voltage 3-4 s battery , ravizaa male straight full body mannequin display 6 feet skin color- colour skin- height 6 ft- type male- material plastic- item weight 12 kilograms , 1 and half sqmm 2 core black copper pvc insulated sheathed flexible cable- category multicore flexible cables- conductor copper- core 2- diameter 1and half sqmm- insulation type pvc- tested voltage 1100 v- length 30 m

Upvc Casing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector