Get complete information related to latest Upvc Pipe Spare Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Upvc Pipe Spare Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Upvc Pipe Spare Tenders.
Tender For corrigendum : providing and fixing electrical material including led lights and wiring in nagar parishad anupgarh area. - electrical work, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .led street light fixture with minimum lumen output 5600 lm, led street light fixture with minimum lumen output 7500 lm, led street light fixture with minimum lumen output 12500 lm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure a attached with this bsr10.0 sq. mm2 core, supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsrdead end clamp with eye hook & pole clamp, providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .40 mm dia., supply and fixing of lt porcelain shackle insulator as per is:1443 1979 and as per discoms standard specifications, suitable for working voltage 1100 volts including all accessories like gi hardware fittings confirming to is:7935/1975 (latest amended) nut, bolt etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr100mm x 110mm, supply & drawing wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped etc. as required. for additional technical parameters of product / work refer annexure a attached with this
Tender For bid to ras corrigendum : supply of internet lan materials - sc pigtails single mode , single mode lc-lc patch cards- 3mtrs , single mode sc-lc patch cards , single mode sc-sc patch cards , information outlets - cat 6 , rj45 jack modular plug type , face plates dula port , face plates - single port , 24 port loaded patch panel , patch cable 1m , patch cable 2m , media converter 1gbps , impact i o punch tool , modular rj45 crimping tool , ofc singlemode cable , power injectors , ofc light , rj 45 tone tester , 25mm pvc pipe white colour , 1 inch casing , 1 and half inch casing , 2 inch casing , 2 inch duct casing , cable stripper flat nose cable cutter , nail hammer medium , cable cutter , casing cutter , cutting plier , screw machine , hdpe pipe 1 and half inch , ofc liu , ofc enclosures , ofc use t-boxes , ofc splicing cutter , aluminium ladder 8ft , 2 mm cable clamps , 1 inch flexible pipe white , 1 and half inch flexible , isoprophyl , 1 inch screws , wood gatties , black zipsun screws 1 inch , bombay nails 1 and half inch , insulation tape box of 30 nos , cable zip ties 200mm , cable zip ties 250mm , cable name tags , spring 30mtrs , 25mm pvc clamps white , axe saw blade
Tender For supply of 6 core armoured ofc , duct pipe for ug ofc , installation of ug ofc , 4 core armoured ofc , conduit pipe 1 inch , pvc casing oblique capping three fourth inch , cat 6a cable , cat 6a patch cord 1 mtr , cat 6a patch cord 5 mtr , liu 12 port fully loaded , liu 24 port fully loaded , 9 u rack with pdu fan cable manager , 6 u rack with pdu fan cable manager , patch panel 24 port fully loaded , io box complete , rj 45 connector , plastic tie 6 inch , plastic tie 3 inch , sc to lc patch cord , sfp transceiver module , flexible pipe and casing 1 inch , indoor installation of racks conduit pipe casing and cables indoor
Tender For corrigendum : supply of sitc of pabx system osb x5 uc , sitc of open scape desk phone , sitc of open scape desk phone cp210 , sitc of 30 pair tele tag block , sitc of submain wiring , sitc of pvc conduit , sitc gi box with modular plate for plug socket , sitc of gi box with modular plate , sitc of earthing set , sitc of gi strip , sltc of ferruling of 20 pair cable , sltc of utp 4 pair cat 6 lan cable , sitc copper conductor , sitc of telephone socket , sitc of rj 45 lan connector , sitc of 24 port poe switch with , sitc of patch cords , sitc of patch cords, 3 mtr , sitc of cat 6 complete io , sitc of 1 port face plate , sitc of 12 port jack panel , sitc of armoured ofc , sitc of fully loaded liu , sitc of fiber pigtail , sitc of single mode cord , sitc of mulimode cord , sitc of 36 u rack , sitc of pvc duct , sitc of marked duct , sitc of high grade pvc cable tray , sitc of server pc ddr4 sdram
Tender For supply of 90 mm, 110 mm and 160 mm dia pvc pipe 4kg/ cm2 and labour charges for laying and fixing to cover the cable from equipment to nearby cable duct in 400/230 kv ict bay provision work at k.r.thoppur 400/230 -110 kv ss.
Tender For auction sale of scrap pipe ms from demolitions / dismantling / testing with ms liner,scrap miscellaneous ms from works / products ms light scrap,scrap from works / products old & used gi sheet,scrap miscellaneous pvc from works / products pvc ventilation duct,scrap from works / products rubber,scrap electrical cable ht xlpe cable copper,scrap welding electrode ms from works / products end bits / cut pieces,scrap furniture wooden,scrap mechanical item,scrap dewatering pump submersible pump sump pump multistage pump, eetc,scrap distribution board ms from enabling works medium in size -,scrap electrical fitting insulatorlight fitting,scrap furniture ms from enabling works broken / dismantled steel almirah- double,scrap furniture ms from enabling works broken / dismantled steel dining table,scrap e-waste ups from demolitions / dismantling / testing medium in size,scrap electrical item exhaust fan,scrap small tools ms from enabling works concrete buckets,scrap electrical item high mast lighting from enabling works medium in size,scrap machines & machine parts ms used old equipments welding machine,scrap pvc water tank from works / products 10000 ltrs,scrap from works / products ms office container 40 feet
Tender For corrigendum : supply of electrical equipments and installation works of electrical and instrumentation system for oesc at maps site - supply of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, washer for shear bolt, nut for shear bolt, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, installation of cable tray supporting structure including site works such as cutting, drilling, threading, welding, fixing the hardware, touch up painting using zinc rich paint for welded surfaces etc., as per the specification, cable installation note, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/2002, 2003 & 2004/dd, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 150 mm width, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 300 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 150 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 300 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 150 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 300 mm width, common cable tray and ventilation duct support for supporting 1 tier of straight tray or elbow of 150 mm width, cabling systemsupply of following sizes of 6.6kv/11kv rated, al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed, gi wire/ strip armoured power cables along with steel cable drums, 3cx185 sqmm armoured cable, supply of following sizes of 1100v rated, cu/ al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed power cables along with steel/ wooden cable drums, 3.5cx400 sqmm, al conductor, armoured cable (gi armour) with steel cable drum, 3cx2.5 sqmm, cu conductor, un-armoured cable with wooden cable drum, supply of following sizes of 1100v/ 650v rated, cu conductor, pvc (type-a) insulated, overall screened, frls pvc (st1) inner and outer sheathed, gi armoured control cables along with steel/ wooden cable drums, 4cx2.5 sqmm, 1100v rated with wooden cable drum, 2cx2.5 sqmm, 1100v rated with wooden cable drum, 4cx10 sqmm, 1100v rated with steel cable drum, 2cx10 sqmm, 1100v rated with steel cable drum, 10px1.5 sqmm, 650v rated with steel cable drum, supply of following medium duty gi pipes/ heavy duty erw rigid conduits/hume pipe for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following medium duty gi pipes/ conduits/hume pipes for routing cables (from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge), including supply and installation of clamps/ fasteners/ supports, accessories like bends/ couplers along with cutting, threading etc., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following sizes and types of cable trays and accessories as detailed in drawings and specification including sup