Tender For supply & establishment of sterile department of rims teaching hospital, raichur on turnkey basis-automated 1000 lph ro water plant with pre-treatment setup and 3000 liters ss storage tank, mild steel shed, required electrical work, plumbing for ro plant supplier should supply the 1000 lph ro water plant with pre-water treatment setup and 3000 liters ss storage tank and plumbing work from building top to the ground floor sterile department and required electrical & civil work for proper installation & commissioning of ro plant 1 bulksupply and installation of duct/cassette a/c's and internal electrical wiring and other, wherever required 5.5 ton supplier should supply & install suitable for sterile department, the 5.5 ton duct a/c's to sterile area, non-sterile area, packaging area, receiving area and washing area and make internal electrical wiring etc for proper installation of reputed company duct a/c's 3 bulkss cladding for sterile room, non-sterile room and air tight room supplier should make ss cladding for sterile room : 30f x 14f and non sterile room : 60f x 14f with three doors 1 bulkgood quality upvc/equivalent false ceiling, led lighting and required electrical wiring a good quality and reputed company upvc/equivalent false ceiling of 2x2 size plates with 2x2 led lighting plates and required electrical wiring should be done of total area : 4000 sq.feet 1 bulkanti-bacterial 2mm vinyl flooring with proper installation a good quality and reputed company anti-bacterial 2mm vinyl flooring with proper installation should be done of total area : 4000 sq. feet 1 bulkplumbing work for drain pipe connections and other, wherever required plumbing work-drain pipe connections and related work, wherever required should be done the bidder 1 bulkvitrifiedtiles for walls of sterile room & non-sterile room a good quality and reputed company vitrifiedtiles for walls of sterile room and non-sterile room of total area : 3000 sq. feet 1 bulksupply and proper installation of modular kind main door and back door a good quality modular kind of main door of size : 10f x 7f+2f name board and back door of size : 4f x 7f +2f name board 2 nosname boards & signage boards etc wherever required a good quality signages and name boards should be done, wherever required 1 bulkanti-bacterial painting for entire sterile department with premium good quality wall paint with lupum, wherever required a good quality and reputed company premium anti-bacterial wall paint with lupum should be done of total : 4000 sq.feet 1 bulkcivil work-wall breaking, wall construction, door shifting, plastering and other 1) receiving area : wall hole making for pass box and other work 1 bulk 2) sterile area : removing of existing door, wall construction, plastering and other work 1 bulk 3) sterile storage room : wall construction, plastering and other work 1 bulk 4) distribution room : wall breaking, plastering, door installation and other work 1 bulk 5) scrub area : removal of existing door, wall construction and plastering and other work 1 bulk 6) washing area : wall hole making for drain pipe installation and other work 1 bulk 7) if any other civil work required for proper installation, commissioning of sterile department is should be bidder scope only 1 bulkanti-bacterial painting & any carpentry work of existing doors 1) sterile storage room : door painting 1 no 2) distribution room : door painting 1 no 3) changing room : door painting 1 no 4) non sterile room : door painting 1 no 5) packaging room : door painting 1 noheavy duty ceiling fans and switches, sockets ,dimmer, surface boxes etc bidder should supply & install the heavy duty ceiling fans and switches, sockets ,dimmer, surface boxes etc wherever required 1 bulkcad drawing and detailed report with labelling with signature the bidder should visit our proposed site before quoting the tender and design the work flow as per the nabh/nhsrc/nqas of sterile department with desired layout
Tender For special repairs to swimming pool (building no p-28) at baithkol area, naval base karwar and provn of interlocking tiles and replacement of tiles with vitrifiedtiles at ground floor hqkna building at naval base karwar.
Tender For tender for providing and fixing vitrified floor tiles, sanitary fitting and painting work for chief engineer residence jail road under electrical sub division-iii, hpsebl mandi. tender no m-iii-110/24-25
Tender For s_r work for modification of kitchen of flat no. b_8 at mig palm avenue govt. housing estate through up gradation of kitchen including anti-skid vitrifiedtiles floor and ceramic tiles in wall, cooking counter and wooden laminated cabinet in kitchen
Tender For material supply for construction work for a kitchen room at the government lower primary school in nilavagilu village.under mahathma gandhi nrega scheme - ta-add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material, ta-licenced plumber with tools, ta-lead or pvc connection pipe 32mm dia (for wash basin), ta-c.i. / m.s. brackets for flushing cistern, ta-brass stop cock, ta-cp brass waste 32 mm of standard pattern, ta-cp brass chain with plug, ta-copper plated brass piller tap 15mm, ta-white vitreous china clay flat back wash basin size 630x450mm, ta-granite sink 23cm thick, ta-vitrifiedtiles 600x600 mm, ta-white cement, ta-ceramic tiles 30 x 30 cms, ta-lime, ta-add brush, putty, sand paper at 5% on cost of paint, ta-liquid wood filler, ta-primer, ta-add brush, putty, sand paper, roller at 1% on cost of paint, ta-water proofing cement paint, ta-add brush, putty, glue at 5% on cost of paint, ta-whitening, ta-dry distemper, ta-add hom of welding and grinding machine at 2% on material, ta-fabricator, ta-5.50 mm thick plain glass, ta-chrominum plated screws, ta-cleat angles, ta-alluminium handles - 15 mm, ta-alluminium tower bolt - 20 cm, ta-pvc beading, ta-rubber beading for shutters beading, ta-nylon rollers, ta-powder coated 60-70 micron, ta-mason class i (with tools), ta-add brush at 1% on cost of paint, ta-enamel metal paint, ta-add providing and removing scaffolding at 3% on labour, ta-painter class i, ta-add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, ta-ready mix primer paint (ready mix red lead paint), ta-add hom of welding and grinding machine at 4% on material, ta-welder grade i, ta-fitter class i, ta-ms flat, ta-m.s rods, ta-mathi/nandi wood scantling, ta-hom of machinaries for planing, ta-add cutting and other wastage 5%, ta-mathi/nandi wood planks for panels 25 mm thick, ta-add handling , loading and unloading at 1% on material, ta-burnt bricks class 35 (non modular), ta-add watering charges at 1 % on labour, ta-add sundries charges at 1 % on labour, ta-mixer (concrete small used in culvert), ta-bond stone 20 x 20 x 45 cm, ta-rubble stones, ta-binding wire, ta-tmt bars fe 500, ta-casurina poles 75 - 100 mm dia, ta-add sundries charges at 2 % on material, ta-add handling , loading and unloading at 2% on material, ta-casurina poles 100 - 150 mm, ta-silver oak or equivalent planks 38 mm thick, ta-jungle wood runners and planks, ta-hom of vibrator 0.71 days, ta-plasticizer / super plasticizer, ta-add watering charges at 1 % on material, ta-mixer (concrete) - 1 cum capacity, ta-portland cement, ta-coarse sand (zone iii), ta-broken stone aggregate 12 mm to 10 mm size, ta-broken stone aggregate 20 mm size, ta-broken stone aggregate 40 mm size, ta-over head & other miscellaneous charges, ta-add sundries charges at 1 % on material
Tender For construction material work in gram panchayat madolai-, ghadla kankar jhajra, , mortar - mud / mortar, , lime of bud bhat for masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone and brick (for other than road work), , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit of mathar (broken by crusher), , 12/10/6mm grit stone (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 63-40mm crushed stone aggregate (cut voids 1/11), , 63-40mm hand broken stone aggregate (wides cart 1/11), , 90-45mm. hand broken stone aggregate (cut voids 1/11), , quarry rubbish (cut voids 1/6), , gravel (cut voids 1/6), , conker (cut voids 1/6), , binding material (pi 4-6) (cut voids 1/6), , brick (22.5 x 11 x 7.50 cm), , first class, , ii class, , soling / kharanja / masonry stone, , chinrai beradda (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material(3-4" thick & length and width 1-2"), , sandstone(dpc,sill,coping,lintel,tand,almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , 901 to 2300 sq. cm., , upto 900 sq.cm, , more than 2300 sq.cm, , marble chips, , marble powder, , marble stone (rajnagar ii quality/local 20mm thick), , 901 to 2300 sq. cm, , up to 100 sq cm, , more than 2300 sq.cm, , stone threshold, , single pattam size 100 x 75 mm., , double pattam size 125 x 75 mm., , stone slabs, , up to 1.5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles / blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core, , cable isi marked, , 1.50 sq mm., , poojaar's, , 2.50 sq mm., , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 6.00 sq. mm., , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30mm thick, solid core single door), , structural steel, , iron (for tor steel fe 415/500 reinforcement), , winding wire 18 gauge, , iron guard, , angle iron square rebar leaf angle iron, , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , cement concrete poles for wire fencing length 2.5 m average, , size 0.10*0.15 meter 4mm diameter high tension steer wire 8 nos, , including, , 150 cm high fencing of precast r.c posts of 15cm*15cm tapered to10*10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30*30*45cm) corner and every tenth posts to be strutted with same r.c. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with g.i. staples including earth work in excavation etc. complet, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , glass, , 3 mm thick glass, , 5 mm thick glass,
Tender For work includes new toilet near verandah of high school block and ramp.estimate includes dr foundation, rr basement, solid block masonry, rcc roofing, ceramic floor and wall tiles,vitrifiedtile primer painting fittings rcc septictank waste pit etc
Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrifiedtiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix