Latest wagon loading machine Tenders | Government wagon loading machine Tenders

CTN :42897350

13 Dec, 2025 8.65 Lacs

Multi City - Karnataka

Tender For corrigendum : supplying materials for construction of godawn at korlagundhi village - kogo-unit cost as per the specification( gi sheet), kogo-ms pipes of 80 mm to 100 mm dia, kogo-rms gusset plate, kogo-corbon electrodes, kogo-welder grade i, kogo-hom of welding and grinding machine, kogo-mechanic class ii/mechanic hmp grade i/eme grade, kogo-hom of cutting and grinding machine, kogo-tools and plants at 2 percent on material, kogo-broken granite metal 12.5 mm, kogo-broken granite metal 10 mm, kogo-coarse sand (zone iii), kogo-portland cement, kogo-mixer (concrete small used in culvert), kogo-red oxide, kogo-add watering charges at 1percent on material, kogo-boulders, kogo-size stone 20 x 20 x 25 cms, kogo-bond stone 20 x 20 x 45 cm, kogo-broken stone aggregate 12 mm to 10 mm size, kogo-plasticizer / super plasticizer, kogo-mixer (concrete) - 1 cum capacity, kogo-broken stone aggregate 20 mm size, kogo-hom of vibrator 0.71 days, kogo-water proofing cement paint, kogo-painter class i, kogo-add providing and removing scaffolding at 3percenton labour, kogo-add handling , loading and unloading at 1percent on material, kogo-dry distemper , kogo-whitening, kogo-add brush, putty, glue at 5percent on cost of paint, kogo-ms sheet 20 gauge, kogo-fitter class i, kogo-ready mix primer paint (ready mix red lead paint), kogo-add handling , loading and unloading at 2percent on material, kogor-add hom of welding and grinding machine at 2percent on material, kogo-18 gauge 75 mm ms laths of 2.8 m length, kogo-side guides, kogo-suspension shaft, kogo-ms side shed clamps, kogo-high tension coil, kogo-ball bearing for rolling shutters, kogo-center pully, kogo-locking arrangments, kogo-ms handles, kogo-bottom lock nail, kogo-aluminium window frame section 1.20 mm thick, kogo-nylon rollers, kogo-rubber beading for shutters beading, kogo-pvc edge beading, kogo-alluminium tower bolt - 20 cm, kogo-alluminium handles - 15 mm, kogo-cleat angles, kogo-chrominum plated screws, kogo-5.50 mm thick plain glass, kogo-fabricator, kogo-silver oak or equivalent planks 38 mm thick, kogo-casurina poles 100 - 150 mm, kogo-jungle wood runners and planks, kogo-tmt bars fe 500, kogo-binding wire, kogor-solid concrete blocks (40x20x20 cms)-5.00 n/sqmm

CTN :43079682

22 Dec, 2025 6.06 Lacs

Gokak - Karnataka

Tender For supplying materials of kitchen room and ac sheet in govt high school benachinmaradi k in benachinmaradi gram panchayat - bib cock 20mm nominal sieze bore, flats ms, chlorinated polyvinyl-chloride pipe 25mm outer dia, mixer(concrete)-1cum capacity, boulders.,, mixer (concrete small used in culvert.), handling loading and unloadding 3% on material, labour charges for lifting and placing in position and making connection at 7% on material.03, polyenthylene water storage tank of specified capacity l.12, pvc pipe of 4kgcum, 63 mm.00, add brush, putty, sand paper at 5% on cost of paint,, liquid wood filter, add brush, putty, sand paper at 2% on cost of paint.,., water proofing cement paint,., add brush, putty, sand paper, roller at 5% on cost of paint.,, plastic emulision paint 01, add brush,putty at 5% on cost of distemper primer, distemper primer.,., mathi/nandi wood scantling,, hom of machinaries for planing,., add cutting and other wastage 5%,, mathi/nandi wood planks for panels 25 mm thick,, add hom welding and grinding machine at 2% on material, fabricator,., ., thick plain glass of 5.50mm, chromium plated screws,.,.,, cleat angles.,., alluminium handles - 15 mm.,., alluminium tower bolt-20 cm., pvc beading.01, rubber beading for shutters beading,.,., nylon rollers,., powder coated 60-70 micron,, add brush at 1% on cost of paint.,., enamel metal paint.,.,, add providing and removing scaffolding at 3% on labour.,, painter class i.,, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint., ready mix primer paint (ready mix red lead paint)., add hom of welding and grinding machine at 4% on materi, welder grade i,, fitter class 1, m.s rods,, add white cement for pointing at 2% on material, border tiles 30 x 10 cms,, glazed tiles 300x400, vitrified tiles 10 mm thick 600 x 600, mm, hom of vibrator 0.71 days.,, plasticizer / super plasticizer.,., binding wire,., tmt bars fe 500,., add handling loading and unloading at 1% on material.,, mason class i (with tools).,.,, solid concrete blocks (40x20x20cms) 4.00 n/sqmm, add watering charges at 1 % on labour.,, add sundries charges at 1 % on labour.,, bond stone 20 x 20 x 45 cm.,, rubble stones.,, casurina poles 100 - 150 mm.,, add handling loading and unloading at 2% on material.,, casurina poles 75 - 100 mm dia., jungle wood runners and plank.,, silver oak, or equivalent planks 38 mm thick.,, add watering charges at 1 % on material.,, mixer (concrete) - 1 cum capacity.,, portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size - bib cock 20mm nominal sieze bore, flats ms, chlorinated polyvinyl-chloride pipe 25mm outer dia, mixer(concrete)-1cum capacity, boulders.,, mixer (concrete small used in culvert.), handling loading and unloadding 3% on material, labour charges for lifting and placing in position and making connection at 7% on material.03, polyenthylene water storage tank of specified capacity l.12, pvc pipe of 4kgcum, 63 mm.00, add brush, putty, sand paper at 5% on cost of paint,, liquid wood filter, add brush, putty, sand paper at 2% on cost of paint.,., water proofing cement paint,., add brush, putty, sand paper, roller at 5% on cost of paint.,, plastic emulision paint 01, add brush,putty at 5% on cost of distemper primer, distemper primer.,., mathi/nandi wood scantling,, hom of machinaries for planing,., add cutting and other wastage 5%,, mathi/nandi wood planks for panels 25 mm thick,, add hom welding and grinding machine at 2% on material, fabricator,., ., thick plain glass of 5.50mm, chromium plated screws,.,.,, cleat angles.,., alluminium handles - 15 mm.,., alluminium tower bolt-20 cm., pvc beading.01, rubber beading for shutters beading,.,., nylon rollers,., powder coated 60-70 micron,, add brush at 1% on cost of paint.,., enamel metal paint.,.,, add providing and removing scaffolding at 3% on labour.,, painter class i.,, add wire brush, fine steel woo

CTN :43086738

26 Dec, 2025 6.38 Lacs

Multi City - Karnataka

Tender For supplying materials for construction of nrlm shed av/58151 at sangankallu village - sn-painter class i, sn-add providing and removing scaffolding at 3percentage on labour, sn-white cement based putty at 2sqm kg at rs. 1050 per kgs, sn-add brush, putty, sand paper, roller at 5percentage on cost of paint, sn-add handling , loading and unloading at 1percentage on material, sn-add watering charges at 1 percentage on material, sn-plastic emulsion paint , sn-vitrified tiles 10 mm thick 600 x 600 mm, sn-adhesive for tiles, sn-grout for vitrified tiles, sn-spacers for vitrified tiles, sn-mason class i (with tools), sn-honnewood planks for panels 20 mm thick, sn-add cutting and other wastage 5precentage , sn-carpenter assistant, sn-add handling , loading and unloading at 2percentage on material, sn-mathi/nandi wood scantling, sn-mathi/nandi wood planks for panels 25 mm thick, sn-aluminium window frame section 1.20 mm thick, sn-nylon rollers, sn-rubber beading for shutters beading, sn-pvc beading, sn-alluminium tower bolt - 20 cm, sn-alluminium handles - 15 mm, sn-cleat angles, sn-chrominum plated screws, sn-5.50 mm thick plain glass, sn-add 15percentage wastage for glass, sn-fabricator, sn-add hom of welding and grinding machine at 2precentage on material, sn-portland cement, sn-coarse sand (zone iii), sn-mixer (concrete small used in culvert), sn-tmt bars fe 500, sn-binding wire, sn-silver oak or equivalent planks 38 mm thick, sn-casurina poles 100 - 150 mm, sn-casurina poles 75 - 100 mm dia, sn-broken stone aggregate 12 mm to 10 mm size, sn-plasticizer / super plasticizer, sn-mixer (concrete) - 1 cum capacity, sn-jungle wood runners and planks, sn-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, sn-broken stone aggregate 20 mm size, sn-hom of vibrator 0.71 days

CTN :42620789

11 Dec, 2025 NA

Dibrugarh - Assam

Tender For corrigendum : construction of equipment room at nrl rt - civil, structural & architectural, earth work in excavation (refer specification no. c-spc-103), earth work in excavation below ground level for all kinds of works in all types of soils except soft rock and hard rock as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting., for depth beyond 1.5m and upto & inclusive of 3.0m., earthwork in filling by excavating the earth from borrow areas arranged by contractor for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete., backfilling after execution of the work to proper grade and level with selected materials from available excavated soil from spoil heaps, including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete., transporting and disposing the surplus earth and debris including shrubs and vegetations from construction area to areas anywhere outside the plant boundary including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. for carting on the basis of truck measurements (volume of truck reduced by 30% for voids) disposal area s outside plant boundary to be arranged by the contractor .royalty as applicable for disposal outside plant limits to be borne by the contractor., plain & reinforced cement concrete (refer specification no. c-spc-104), providing and laying plain cement concrete for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 cement: 5 coarse sand: 10 crushed stone aggregates/gravels) with 40mm and down size graded crushed stone aggaregates/gravels.(all materials including cement supplied by contractor at their cost), providing and laying reinforced cement concrete of m-30 grade with 20mm and down size graded crushed stone aggregates/gravel in sub-structure of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, rcc pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever req

State Government

CTN :43019601

18 Dec, 2025 NA

Akola - Maharashtra

Tender For annual maintenance contract for unloading and transportation of coal from wagons with the help of machine/ poclain at chp, paras tps on open tender basis

corporations/Associations/Others

CTN :42485358

15 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

15 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

Corporations And Associations And Others

CTN :42963933

11 Dec, 2025 2.92 Crore

Lucknow - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - transportation of d.c. rig machine & its t&p upto site includingloading and unloading with labour and required t&p etccomplete

Central Government/Public Sector

CTN :42816423

11 Dec, 2025 NA

Madurai - Tamil Nadu

Tender For madurai division : proposed collection and supply of 50mm machine crushed stone ballast at gangaikondan ballast depot including loading into railway wagons, unloading and spreading in connection with track renewal works in sr.den/south/mdu jurisdiction.

State Government

CTN :42839014

13 Dec, 2025 3.96 Lacs

Kolkata - West Bengal

Tender For transportation, delivery and re-installation of pet bottle shredding machine including loading, unloading etc. at different locations of ganga sagar mela 2026 and from ganga sagar mela ground to their existing places after ending of g.s. mela 2026.

Wagon Loading Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Corporations And Associations And Others

Central Government/Public Sector

State Government