Latest wall papering Tenders | Government wall papering Tenders

Central Government/Public Sector

CTN :39860592

13 May, 2025 NA

Damoh - Madhya Pradesh

Tender For supply of closed height : 06 mtrs, extended height : 11 mtrs ,aluminium wall supporting exte nsion ladder manufactured from aluminium c shape section of size- 66.6 mm(l) x 31.7 mm (w) x 3.5 mm ( t) confirming tohe - 30 grade t-6 temper as per is: 733 and aluminium 25 mm diameter non slippery roun d corrugated tubing fittedwith heavy duty safety lock , nylon rope and pulley and rubber pads at bottom an d top end. twist proof andunbreakable performance. make - techoscient, sumer , s j ladders or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39837822

21 Apr, 2025 NA

Multi City - Multi State

Tender For supply of aluminium wall supporting-sliding ladders, height 50 foot

CTN :39808275

14 Apr, 2025 47.3 Thousand

Faridabad - Haryana

Tender For fabricating and supplying of furniture at dr. dinesh mahajan and dr. santosh mathapati lab at 2nd floor, thsti ncr bsc faridabad - providing and fixing 350 mm deep over-head storage of required size, on top of the computer table, one side openable, cabinet made of 18mm thick bwp board of approved make on top, bottom, sides, partitions, and 12mm thick bwp ply of approved make at shelves (middle of cabinets) as per drawing. 1.0mm thick laminate of approved make on exposed sides of cabinets wherever required and 0.8mm thick laminates shall be fixed on all unexposed inner faces of cabinets including wooden/pvc lipping, suitable locking arrangement all type of screw, fasteners for hanging, hinges/piano hinges, wooden screw, adhesive, polishing /painting of lipping, magnetic catchers, door handles/knobs, fixing charges and all other type of necessary fittings etc. complete as per design drawings and site condition as directed by engineer in-chargesize of storage: 7 11"x2 8 x1 2", providing, fabrication and fixing in position equipment table of below mentioned following size made of 19 mm thick bwp board on top & bottom, supporting frame shall be made of thick 38mmx38mmx3.2 mm heavy duty ms square pipe fabricated as per design with height adjuster. not less than 18 mm thick polished z-black granite stone of adequate size shall be fixed on top and bottom with suitable adhesives including edge grinding / chamfering & polishing , screws and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the engineer-in-charge.description : size 18 x 18"x 26", providing and fixing over-head storage of required size, fixed on the ms angle 50x50x5mm screwed on the wall with fastener, one side openable, cabinet made of 18mm thick bwp board of approved make on top, bottom, sides, partitions, and 12mm thick bwp ply of approved make at shelves (middle of cabinets) as per drawing. 1.0mm thick laminate of approved make on exposed sides of cabinets wherever required and 0.8mm thick laminates shall be fixed on all unexposed inner faces of cabinets including wooden/pvc lipping, suitable locking arrangement all type of screw, fasteners for hanging, hinges/piano hinges, wooden screw, adhesive, polishing /painting of lipping, magnetic catchers, door handles/knobs, fixing charges and all other type of necessary fittings etc. complete as per design drawings and site condition as directed by engineer in-chargesize of storage: 40"x40 x24", modification of existing equipment table including cutting the ms table with wooden shelf and granite in order to achieve the required sizes and jointing the same with other end including granite chamfering, fixing, wooden shelf repairing, ms structure welding, grinding the joints and painting with synthetic enamel paint all complete as per the direction of engineer in charge.

Central Government And Public Sector

CTN :39518383

14 Apr, 2025 14.27 Crore

Chengalpattu - Tamil Nadu

Tender For corrigendum : supply of electrical equipments and installation works of electrical and instrumentation system for oesc at maps site - supply of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, washer for shear bolt, nut for shear bolt, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, installation of cable tray supporting structure including site works such as cutting, drilling, threading, welding, fixing the hardware, touch up painting using zinc rich paint for welded surfaces etc., as per the specification, cable installation note, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/2002, 2003 & 2004/dd, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 150 mm width, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 300 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 150 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 300 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 150 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 300 mm width, common cable tray and ventilation duct support for supporting 1 tier of straight tray or elbow of 150 mm width, cabling systemsupply of following sizes of 6.6kv/11kv rated, al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed, gi wire/ strip armoured power cables along with steel cable drums, 3cx185 sqmm armoured cable, supply of following sizes of 1100v rated, cu/ al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed power cables along with steel/ wooden cable drums, 3.5cx400 sqmm, al conductor, armoured cable (gi armour) with steel cable drum, 3cx2.5 sqmm, cu conductor, un-armoured cable with wooden cable drum, supply of following sizes of 1100v/ 650v rated, cu conductor, pvc (type-a) insulated, overall screened, frls pvc (st1) inner and outer sheathed, gi armoured control cables along with steel/ wooden cable drums, 4cx2.5 sqmm, 1100v rated with wooden cable drum, 2cx2.5 sqmm, 1100v rated with wooden cable drum, 4cx10 sqmm, 1100v rated with steel cable drum, 2cx10 sqmm, 1100v rated with steel cable drum, 10px1.5 sqmm, 650v rated with steel cable drum, supply of following medium duty gi pipes/ heavy duty erw rigid conduits/hume pipe for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following medium duty gi pipes/ conduits/hume pipes for routing cables (from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge), including supply and installation of clamps/ fasteners/ supports, accessories like bends/ couplers along with cutting, threading etc., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following sizes and types of cable trays and accessories as detailed in drawings and specification including sup

CTN :39696402

28 Mar, 2025 6.12 Lacs

Bhopal - Madhya Pradesh

Tender For maintenance work comprises of painting work of b.p. tank, supporting structures including boundary wall etc. under nwsp.

CTN :39709246

25 Mar, 2025 9.61 Lacs

Bardhaman - West Bengal

Tender For establishment of haulage roadway by supporting with roof bolting and corner side wall from 2wd/24l to 34l/3ed in r-vi (bonbahal) seam of khottadih colliery, pandaveswar area

Central Government/Public Sector

CTN :39752680

29 Mar, 2025 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For supply of dc lead acid batteries for 1 x 800 mw north chennai stage iii fgd - lead acid plante 220v battery , electrolyte , seasoned teak wood battery rack , insulator, rubber pad etc. for rack , inter cell, inter row and inter bank connectors with connection hardware as required , teakwood cable clamps with hardware, cable supporting arrangement having l type copper connectors , battery health management system , hydrometer , set of hydrometer syringes , bridging clamps , battery log book , instruction card , specific gravity correction chart , thermometer with plug and cap , digital cell testing voltmeter 3-0-3 v with testing leads , pocket thermometer digital type , electrolyte resistant plastic funnels , electrolyte resistant plastic jug , plastic filling bottles for filling up , rubber apron , rubber hand gloves , cell lifting straps , insulated spanner for cells , self adhesive pvc stickers for cell numberings , goggles industrial , no smoking notice , wall mounting holders for hydrometer and thermometer , battery trolley with nylon wheels , siphons , earth leakage tester for batteries , vent plugs , intercell connectors , lump sum charges per visit for engineer , lump sum daily charges for engineer , supervision of tests at site - insulation resistance, ampere-hour capacity and retention of charge , test for retention of charge - test for loss of capacity on storage , ampere hour and watt hour efficiency test , capacity test and test for voltage on battery during discharge

CTN :39599606

27 Mar, 2025 NA

Jaipur - Rajasthan

Tender For supply of propeller type ac ventilating fans - exhaust fans (v2) as per is 2312 (q2) , electric ceiling fan with bldc motor (v3) isi marked to is 374 (q2) , led street light 120 w having microwave motion sensor the fixture would have an efficacy of 135 lpw as system efficacy and 175 lpw as chip efficacy ip 66 , led light 72 w post top victorian look suspended mounting arrangement to be mounted on poledo fuse element 11kv 5 amp , led bollard ufo shape 2 feet height 10 w , supply only 5 star 1 point 5 ton hi wall split units indoor outdoor complete with cordless remote control unit and with cooling and heating function of capacity complet connected accessories , supply only electric water heater storage type steel body with copper inner tank and heating element up 2 kv capacity 25 litre bee 5 star , supply only water cooler fully stainless steel electric driven single phase having approx storage and nominal cooling capacity of 40 divide 80 ltrs per day complete , smart led street light endprlplussl 120 watt led 730 pasytopic micr sensor base operation detection range 10 metre light , led street light endprlplussl 120 watt led 730 pasytopic micr sensor base , supply only 12 volt 65 ah sealed maintenance free battery for 30 kva online ups installed at hq swc bldg , wall mounting fancy lightfitting 9 watt complete , lt 1 point 1 kv cable and termination joint 3 point 5 core 25 to 50 sqmm , lt 1 point 1 kv cable and termination joint 3 point 5 core 70 to 120 sqmm , lt 1 point kv cable and termination joint 3 point 5 core 185 sqmm , exhaust fan iron body of size 300 mmvolt single phase , xlpe cable joint ht of size 150 sqmm 3 core straight through joint for 11 kv , xlpe cable joint ht of size 185 sqmm 3 core outdoor end termination type , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 2 nos ubolt rm 4mm to 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 1 nos ubolt rm 75mm 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 18 feet 1 nos profile bracket 3 to 2 nos ubolt rm 20mm 4 nos zinc coated nalis 4 nos , heating element 1 point 5 kw large tringle cup type , led spot light 9 watt complet set , heating element 1 point 5 kw round cup type , glass pane pin headed 4mm thick 4 x 3 sheet , glass pane plane 4 mm thick 4 x 3 sheet , galavnised mild wire mess 0 point 90x 15 mtr tube , forged valve 15mm bore half turn , looking mirror 18x 15 mm with plastic frame , lighting arrestors for 33 kv heavy duty set of 3 pc , glavanise wiremesh 5mm dia wire average width 1 point 14 mm wire mesh width 1 point 12 mtr and 50 feet long , straight through joint for xlpe cable 11 kv of 95 sqmm , lt straight through joint 70 to 95 sq mm , indoor end joint 70 to 95 sqmm , straight through joint for xlpe cable 11 kv of 120 sqmm

CTN :39574649

26 Mar, 2025 78.53 Lacs

Jaipur - Rajasthan

Tender For supply of propeller type ac ventilating fans - exhaust fans (v2) as per is 2312 (q2) , electric ceiling fan with bldc motor (v3) isi marked to is 374 (q2) , led street light 120 w having microwave motion sensor the fixture would have an efficacy of 135 lpw as system efficacy and 175 lpw as chip efficacy ip 66 , led light 72 w post top victorian look suspended mounting arrangement to be mounted on poledo fuse element 11kv 5 amp , led bollard ufo shape 2 feet height 10 w , supply only 5 star 1 point 5 ton hi wall split units indoor outdoor complete with cordless remote control unit and with cooling and heating function of capacity complet connected accessories , supply only electric water heater storage type steel body with copper inner tank and heating element up 2 kv capacity 25 litre bee 5 star , supply only water cooler fully stainless steel electric driven single phase having approx storage and nominal cooling capacity of 40 divide 80 ltrs per day complete , smart led street light endprlplussl 120 watt led 730 pasytopic micr sensor base operation detection range 10 metre light , led street light endprlplussl 120 watt led 730 pasytopic micr sensor base , supply only 12 volt 65 ah sealed maintenance free battery for 30 kva online ups installed at hq swc bldg , wall mounting fancy lightfitting 9 watt complete , lt 1 point 1 kv cable and termination joint 3 point 5 core 25 to 50 sqmm , lt 1 point 1 kv cable and termination joint 3 point 5 core 70 to 120 sqmm , lt 1 point kv cable and termination joint 3 point 5 core 185 sqmm , exhaust fan iron body of size 300 mmvolt single phase , xlpe cable joint ht of size 150 sqmm 3 core straight through joint for 11 kv , xlpe cable joint ht of size 185 sqmm 3 core outdoor end termination type , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 2 nos ubolt rm 4mm to 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 1 nos ubolt rm 75mm 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 18 feet 1 nos profile bracket 3 to 2 nos ubolt rm 20mm 4 nos zinc coated nalis 4 nos , heating element 1 point 5 kw large tringle cup type , led spot light 9 watt complet set , heating element 1 point 5 kw round cup type , glass pane pin headed 4mm thick 4 x 3 sheet , glass pane plane 4 mm thick 4 x 3 sheet , galavnised mild wire mess 0 point 90x 15 mtr tube , forged valve 15mm bore half turn , looking mirror 18x 15 mm with plastic frame , lighting arrestors for 33 kv heavy duty set of 3 pc , glavanise wiremesh 5mm dia wire average width 1 point 14 mm wire mesh width 1 point 12 mtr and 50 feet long , straight through joint for xlpe cable 11 kv of 95 sqmm , lt straight through joint 70 to 95 sq mm , indoor end joint 70 to 95 sqmm , straight through joint for xlpe cable 11 kv of 120 sqmm

Wall Papering Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector