Tender For supply of gate bell value 20mm dia , gi nipple 20 mm dia x 150 mm long , gi flange 50 mm 2 inch with nut and bolt with washer , gl reducer 3x2 inches , gl nipple 25 mm dia x 150 mm long , gl bend 50 mm , gl nipple 80 mm dia x 160 mm long , gl union 80 mm dia , gl gate valve 80 mm , hose clamp 25 mm , gi clamp 25 mm , rubber gasket , die set large , gi socket 50 mm dia , pvc connector 75 mm dia , brass nozzle gate value 25 mm dia with on off system , coagulant chemical , chlorination chemical , tds meter isi market , alum fitkri , bleaching powder , teflon tape , gi pipe 80 mm dia 5 ft long with ms flange , gi pipe 80 mm dia 10 ft long with ms flange , gate value 80 mm , gi nipple 25 mm dia x 150 mm long , tank nipple 80 mm dia , armed hose 75 mm dia , pvc high pressure pipe 32 mm dia 4 ft long , hdpe water jerry cane 30 ltr , pvc suction hose 75 mm dia 10 mtr long , pvc water tank 5000 ltr , foot value brass 75 mm dia , nozzle brass 25 mm dia , nylon rope 12 mm , tds meter isi marked , heavy duty pipe wrench , gi end plug 75 mm , teflon tape , cotton thread , hdpe water tank 500 ltr , led bulb 18 watt , led bulb 11 watt , waste pipe whb , acp sheet , jack , tyre with tube 7.50 16 tf , 18 watt led , 11 watt led , fan belt , fuel flexi pipe , fuel filter , oil filter , air filter , injector over flow pipe , mcb 63 amp 4 pole , ignition switch , avr , alternator 12 kva , iron fuel line for injector , oil filter kirolsker , filter fuel pre universal type 1 ltr , feed switch , diesel tank led , solo night switch , fuel flexible pipe 1 mtr long , change over switch 100 amp offload , flexible wire 90 mtr roll , armed wire 1.5 sqmm sc , self starter 12 volt , filter 0.5 ltr , opti micron filter cartridge size 20 micron for ro , carbon media filter , micro carbon filter 20 x 4 inches , pressure sand filter 14 x 65 inches //bid details 2 / 68
Tender For corrigendum : work no- 18 wastewatertreatment through n-treat technology based in-situ drain (nallah) treatment at city forest drain in ghaziabad, uttar pradesh.
Tender For corrigendum : work no- 17 wastewatertreatment through n-treat technology based in-situ drain (nallah) treatment at hindon vihar drain in ghaziabad, uttar pradesh
Tender For corrigendum : work no- 16 wastewatertreatment through n-treat technology based in-situ drain (nallah) treatment at kaila bhatta drain in ghaziabad, uttar pradesh
Tender For supply of drinking water and hand wash points , ro plant 1000 lit per hour , digital display , modular toilet gents , modular toilet ladies , green house , networking to computer science department , wastewatertreatment plant
Tender For design, fabrication,supply, erection,testing and commissioning of 50 kld decentralised wastewatertreatment system (dewats) phytoremediation in veerampatinam beach south side ariyankuppam block including operation, maintenance of system for 2 years.
Tender For design, construction, testing and commissioning of 50 kld decentralised wastewatertreatment system (dewats) phytoremediation in veerampatinam beach north side ariyankuppam block including operation and maintenance of the system for two years.
Tender For design,construction,testing and commissioning of 75 kld decentralised wastewatertreatment system (dewats) phytoremediation on the bund of pond, irulansandai bahour commune in ariyankuppam block including operation, maintenance of system for 2years.
Tender For design, construction, erection, testing and commissioning of 100 kld decentralised wastewatertreatment system (dewats) thengaithittu street, ariyankuppam block including operation and maintenance of the system for two years.
Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil.,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size),rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter