Latest water control structure Tenders | Government water control structure Tenders

corporations/Associations/Others

CTN :44671275

06 Apr, 2026 NA

Surat - Gujarat

Tender For supply of various electrical material like electrical accessories, wires, cable etc. for electric maintenance work of various municipal buildings & nagar prathmic school's within east zone-a area limit for the period of two(02) year.-lamp & halogen tube, led light & accessories- 2.0 x 2.0 feet square 36 (watt) led fixture for indoor lighting or its equivalent , 2.0 x 2.0 feet square 36 (watt) led fixture driver for indoor lighting or its equivalent , 4.0 ft. (1200 mm) complete pvc t5 led tube light 18/20 watt lumen out 2000/2100 luminary efficacy 100lm/watt , 4.0 ft. (1200 mm) complete aluminium body t5 led tube light 18/20 watt lumen out 2000/2100 luminary efficacy 100lm/watt , 50-55 watt led flood light fitting having efficacy 100lm/watt, cct 5000k to 5700k , 30-35 watt led flood light fitting having efficacy 100lm/watt, cct 5000k to 5700k , 150-250 watt led flood light fitting having efficacy 100lm/watt, cct 3000k to 3500k , 18/20w, 240v, 50hz, led panel light (square/round) , 12/15w, 240v, 50hz, led panel light (square/round), , ceiling fan & accessories , supply of 1200 mm sweep (48"), bee 5 star rated, ceiling fan with brush less direct current (bldc) permanent ferrite magnet motor, rust free 3 nos. aluminium blades, 2 nos. canopies, air delivery minimum 215 cmm, 350 rpm , ceiling fan, (48"), 1200 mm, energy efficient, high speed, air delivery, minimum 218 cmm input power maximum 55 watt , pedestal fan a.c. 230v. 50 cy/s. 400 mm sweep oscillating, type and adjustable, height complete with guard regulator & standard lead flexible wires and plug top. , wall fan a.c. 230v. 50 cy/s. 400 mm sweep oscillating, type and adjustable, height complete with guard regulator & standard lead flexible wires and plug top. , wall fan a.c. 230v. 50 cy/s. 450 mm sweep oscillating, type and adjustable, height complete with guard regulator & standard lead flexible wires and plug top. , supplying single phase approved make industrial wall fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 600 mm dia size and maximum speed 1440 rpm , supplying single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 305 mm dia size and maximum speed 900 rpm , supplying single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 450 mm dia size and maximum speed 900 rpm , supplying & erecting approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame. having 200 mm with 1350 rpm , supplying & erecting approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame. having 250 mm with 1350 rpm , capacitor 440 v ac,1.5 f , capacitor 440 v ac,2.5 f , ding dong bell , miniature circuit breaker (mcb) , mcb enclosure , mcb c-curve suitable to operate on 240 v ac system and having short circuit breaking capacity 10 ka , mcb c-curve suitable to operate on 415 v ac system and having short circuit breaking capacity 10 ka , mcb b-curve suitable to operate on 240 v ac system and having short circuit breaking capacity 10 ka , mcb b-curve suitable to operate on 415 v ac system and having short circuit breaking capacity 10 ka , mccb , rccb , flexible wire cable , modular accessories , modular board , modular plate , electrical insulation tape roll (r-y-b-n) , wooden grip packet (>50 nos.) , pvc grip packet , aluminium strip 10 ft , rubber clamp(fan) , pencil cell aaa size 1.5 v , pencil cell aa size 1.5 v , 9 v battery cell , 12 v 23a alkaline battery cell , aluminium lug pin type as per above wire/cable size 2.5/4.0 sq.mm cable , aluminium lug pin type as per above wire/cable size 6.0/10.0 sq.mm cable , aluminium lug pin type as per above wire/cable size 16.0 sq.mm cable , copper lug pin type for 2.5/4.0 sq.mm cable , copper lug pin

State Government

CTN :42710901

06 May, 2026 87.22 Lacs

Jalpaiguri - West Bengal

Tender For corrigendum : construction of guard room, land development, construction of valve chamber and installation of different dia valve , restoration of roads , gap joining with new hdpe pipeline and allied work for jda zone- i and ii pwss area at jaigaon

State Government

CTN :44692993

20 Apr, 2026 29.20 Lacs

Katra - Jammu And Kashmir

Tender For balance work for construction of sr. secondary school addl. classrooms at govt. hss panthal zone reasi, district reasi.

Central Government/Public Sector

CTN :44687368

13 Apr, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1 cement - 3 coarse sand) 12 mm

corporations/Associations/Others

CTN :44702396

15 Apr, 2026 NA

Korba - Chhattisgarh

Tender For corrigendum : repair and maintenance work of mmu store room, zone office bathroom and store room in rss nagar zone office under ward no. 26. (corporation item) (first tender)

corporations/Associations/Others

CTN :44702436

15 Apr, 2026 NA

Korba - Chhattisgarh

Tender For repair and maintenance work of mmu store room, zone office bathroom and store room in rss nagar zone office under ward no. 26. (corporation item) (first tender)

State Government

CTN :44492011

02 Apr, 2026 51.9 Thousand

Sheopur - Madhya Pradesh

Tender For corrigendum : type g3 light commercial vehicle (non-ac) (above 3 to 5 metric ton) mini truck or equivalent, etc in sheopur town zone dc under south division sheopur. - name of work tender for hiring of type g3: light commercial vehicle (non-ac) (above 3 to 5 metric ton) mini truck or equivalent, etc in sheopur town zone dc under south division sheopur. (as per vehicle policy)